LAGAN Built-in Microwave Assembly Instructions
Product by IKEA
Product Overview
This document provides assembly instructions for the IKEA LAGAN built-in microwave oven. The product is designed and quality-checked by IKEA of Sweden.
The front view shows a built-in microwave unit with a door, control panel, and display. The unit is depicted as it would be installed within a cabinet.
Installation Guide: Step 1 - Preparation
To begin the installation, gather the following tools:
- Pencil
- Tape measure
- Jigsaw
The first step involves precise measurement and marking of the installation site within the cabinet. A diagram illustrates a person using these tools to mark the cabinet for the necessary cutout.
Installation Guide: Step 2 - Cutout and Placement
Accurate dimensions are essential for a correct fit. Ensure the following minimum clearances and cutout sizes are maintained:
- Minimum dimension: 190 mm
- Minimum dimension: 150 mm
- Minimum dimension: 130 mm
- Minimum dimension: 100 mm
A diagram displays a cabinet interior, highlighting the designated cutout area. Arrows indicate the required minimum clearances around the installation space, ensuring proper ventilation and fit for the microwave unit.