ADAM SELFIE II Magnetic Tripod Selfie Stick

Product Introduction

The SELFIE II is a versatile Magnetic Tripod Selfie Stick designed for modern smartphones.

Specifications

• Model Name: SELFIE II
• Type: Magnetic Tripod Selfie Stick
• USB-C Input: 5V=0.1A
• Battery Capacity: 50 mAh (Supports over 20,000 pictures per charge)
• Bluetooth Version: V4.2
• Bluetooth Range: 10 meters (33 ft)
• Compatibility: iOS / Android
• Folded Size: 60 x 49 x 190 mm
• Maximum Length: 800 mm
• Weight: 170 g
• Warranty: 3-Year Limited Warranty
• Origin: Made in China

Items Included:

• SELFIE II Stick x1
• USB-C Cable x1
• Metal Ring x1
• Installation Guide x1
• ADAM Pouch x1
• Phone Strap x1
• Strap Adapter x1
• User Manual x1

How to Use

Bluetooth Pairing

Follow these steps to pair your device:

1. Press and hold the camera button on the remote controller for 3 seconds until the green light flashes.
2. Turn on the Bluetooth function on your smartphone.
3. Search for the Bluetooth device named "SELFIE II" on your smartphone and select it.
4. The green light will turn off, indicating that the pairing is complete.

Diagram Description: The Bluetooth pairing process is illustrated. It shows pressing the camera button on the remote controller for 3 seconds, indicated by a flashing green light. The next step shows a smartphone with Bluetooth turned on, searching for the 'SELFIE II' device. The final state shows the green light turning off, signifying successful pairing.

Product Overview Diagram

The SELFIE II Magnetic Tripod Selfie Stick is depicted. At the top is a Magnetic Ring designed for MagSafe compatible devices. Below this is the main body, an Aluminum Alloy Telescopic Rod, which can be extended. A foldable tripod base is attached to the bottom of the rod. A Bluetooth Control (Remote Controller) unit is integrated into the rod, and a USB-C Input port is also visible for charging. A component labeled 'SELFIE LIGHT' is shown, with a note indicating it is not included.

Key Components:

• Magnetic Ring
• MagSafe Compatible System
• Aluminum Alloy Telescopic Rod
• Foldable Tripod
• Bluetooth Control (Remote Controller)
• USB-C Input
• SELFIE LIGHT (Note: Not included)

Phone Adapter & Strap Installation

Follow these steps to attach your phone and strap:

1. Put the phone adapter into the phone case from the inside. ? Note: A phone case (not included) is required.
2. Put the smartphone into the phone case and secure it.
3. Tie the phone strap to the metal loop on the adapter.
4. Thread the phone strap through the selfie stick and tie it up securely to prevent accidental falls.

Diagram Description: The installation of the phone adapter and strap is shown in four steps: 1. Insert the phone adapter into the phone case from the inside. (A phone case is required but not included). 2. Place the smartphone into the phone case. 3. Tie the phone strap to the metal loop on the adapter. 4. Thread the phone strap through the selfie stick and tie it securely to prevent accidental drops.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• (1) Reorient or relocate the receiving antenna.
• (2) Increase the separation between the equipment and receiver.
• (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• (4) Consult the dealer or an experienced radio / TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Attention

Please observe the following precautions:

• Do not disassemble, puncture, drop, bend, or modify the device.
• Do not shake the device while charging.
• Unplug the device when it is fully charged.
• Do not expose to liquids.
• Keep away from children.
• Avoid extreme temperatures.

Warranty & Support

• Warranty: 3-Year Limited Warranty
• For the fastest and safest charge, use an ADAM cable, your device's original cable, or a certified cable (such as MFi).
• For more information, please visit the ADAM store.
• Manufacturer: ADAM elements International Co., Ltd.
• Website: www.adamelements.com
• Support Email: support@adamelements.com
• Phone: +886-2-2738-9900
• FCC ID: 2ABY9SELFIE-Pro

Scan the QR code [QR Code] on the packaging for the user manual.