Instructions for sirenmarine models including: Limit Switch, Switch

Limit Switch

User Guides & Manuals– Siren Marine

Siren 3 Pro Main Device– Siren Marine

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 251.61KB

Document Document

Limit Switch Wiring Diagram

Installation Instructions:
1. Connect switch terminal COM (1) to DC Common Ground (-) as shown in the picture below.
2. Connect Pink wire from Harness 1 cable to switch terminal NO (3, middle) as shown in the picture below. This is Security 1 wire.
3. During the Switch installation at the door or window, the Switch will be pushed down (in) which causes the contact to be made. Add "Security 1" to Monitoring Screen in Siren Settings. The App will display "OK".
4. When the door or window opens, the Switch contact will be open, and the "Alert" will display on the App.
5. You can also use Harness 2 Pink wire for Security 2 and Light Green wire for Security 3.

COM (1)

NO (3)

NC (2) NOT USED