LG NANO91 Series Quick Setup Guide
Introduction
This guide provides instructions for setting up your LG NANO91 series Nanocell TV. Please read the safety and reference information before proceeding.
Preparation and Parts
Before starting, ensure you have all necessary parts and a clear workspace.
Parts typically include:
- TV Screen
- Stand Components (Base, Neck)
- Screws: [M5 x L14 screws] (x4), [M4 x L20 screws] (x4)
- Washers
- Manuals and Safety Information
⚠️ Important Safety Notes:
- Handle the TV with care to avoid damage.
- Two people are recommended for lifting and positioning the TV.
- Place the TV screen face down on a soft, clean surface (e.g., a blanket or cushion) to protect the screen during assembly.
- Ensure all screws are tightened correctly but do not overtighten.
Installing the Stand
Step 1: Prepare the TV
Lay the TV screen face down on a soft, protective surface. [Diagram description: TV screen is placed flat on a soft surface.]
Step 2: Attach Stand Components
Attach the stand neck and base to the back of the TV using the provided screws. Align the holes and secure with four [M5 x L14 screws] and four [M4 x L20 screws], each with a washer. [Diagram description: Stand parts being screwed into the back of the TV.]
Step 3: Position the TV
With assistance, carefully lift the TV and place it upright on a stable, level surface. [Diagram description: Two people lifting the TV and placing it on a table.]
Wall Mounting
For wall mounting, refer to the separate wall mount installation guide. Ensure you use the correct VESA mounting pattern and hardware for your chosen wall mount. The TV supports standard VESA mounting. [Diagram description: Shows general steps of attaching a bracket to the TV and then to a wall mount.]
⚠️ Ensure the wall mount is securely attached to the wall and the TV is properly secured to the mount.
Connecting Devices
Connect your external devices to the appropriate ports on the TV. Refer to the diagram for port locations and types:
- HDMI IN (eARC/ARC): Connect high-definition sources like Blu-ray players, gaming consoles, or set-top boxes.
- USB IN: Connect USB drives for media playback or external hard drives.
- ANTENNA/CABLE IN: Connect for over-the-air broadcasts or cable TV.
- SATELLITE IN: Connect a satellite receiver.
- COMPONENT IN / AV IN: For older analog devices. An adapter may be required.
- AUDIO OUT / H/P OUT: Connect headphones or external audio systems.
- OPTICAL DIGITAL AUDIO OUT: Connect to soundbars or AV receivers for digital audio.
- LAN: Connect to your home network for internet access and smart features.
The TV also supports wireless connectivity (Wi-Fi, Bluetooth) for smart features. [Diagram description: Shows icons for Wi-Fi and Bluetooth.]
Specifications
Dimensions and Weight:
| Model | A (Width) | B (Height) | C (Depth) | D (Height without stand) | E (Stand Width) | F (Stand Depth) | G (Weight without stand) |
|---|---|---|---|---|---|---|---|
| 75NANO91TNA | 1677 mm | 1043 mm | 384 mm | 966 mm | 72.9 kg | 37.9 mm | 35.0 kg |
| 86NANO91TNA | 1926 mm | 1183 mm | 432 mm | 1106 mm | 73.2 kg | 55.4 mm | 51.9 kg |
Power Requirement: AC 100-240 V~50/60 Hz
Additional Information
Analog Gender adapter: This adapter, if needed for older devices, can be purchased separately from LG Customer Service.
Note: Specifications may vary by model.
