Installation Instructions
Wiring Diagrams
Step 1
Ceiling fan wiring connection to outlet box.
[Diagram: Ceiling fan motor and wires connecting to outlet box, showing ground wire connection]
Step 2
Main line wiring identification.
Main line:
- Live wire (Red)
- Neutral wire (Blue)
Earth wire:
- Green ground wire (Yellow)
[Diagram: Color-coded wires for Live, Neutral, and Earth connections]
Signal line: please do not move.
When installing the wiring, please leave the signal wire naked to ensure that there are no obstacles around it to avoid affecting the remote.
Step 3
Connecting the receiver to the ceiling fixture.
[Diagram: Receiver unit being mounted inside the ceiling fixture]
Step 4
Securing the receiver unit.
[Diagram: Receiver unit secured within the ceiling fixture]
Step 5
Final wiring connections and enclosure.
[Diagram: Final wiring connections and closing the fixture cover]
Precautions
- Main motor high voltage, non-professional, please do not disassemble it.
- When equipped with a pull switch as a wall switch, it must be turned on before this control can work.
- If the remote control does not work, please check: Is the battery connected correctly, or insufficient power supply? Disconnect between checks Controller and fan lights.
- If not using for a long time, please turn off the power. Turn on the power and remove the control battery.
2.4G Wireless Digital Remote Controller
[Diagram: Layout of the 2.4G wireless remote control with labeled buttons]
- Light on/key
- 1 hour delay key
- Brightness+
- Color temperature+
- Brightness-
- Color temperature switching
- Mid-range
- Low-grade
- Fan stop
- Air guide wheel/switch
- Turn off the fan
- Learn the code key
- APP download [QR Code]
Product Brief
This product uses 2.4G wireless digital remote control technology, remote control one-to-one control, easy operation, strong anti-interference ability.
Parameter
- Input voltage: 180-265V AC50/60Hz
- Output voltage: 120-220V
- LED output Power: (40-80W)x2
- Motor rated power: ≤40W
- LED output current: 220mA
- RF: 2.4G
- Remote distance: ≥20M
- Battery model: AAA 1.5V 2PCS
2.4G Fan Lamp Special Remote Control
