User Manual for HDVS models including: 1852CSH, 1852CSH TFT LCD Monitor, TFT LCD Monitor, LCD Monitor, Monitor
TFT LCD MONITOR USER MANUAL HDVS Series 1852CSH WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product=s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Precautions Safety--------------------------------------- Installation--------------------------------------- Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it any further. Unplug the unit from the wall outlet if it is not going to be used for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself. Allow adequate air circulation to prevent internal heat built-up. Do not place the unit on surfaces(rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes. Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust or mechanical vibration. The unit is not designed to be waterproof. Exposure to rain or water may damage the unit. Cleaning------------------------------------ Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the finish of the unit. Retain the original carton and packing materials for safe transport of this unit in the future. 2 Safety Precautions Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by that party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired 3 Features Multi-Function Display VGA/ DVI-D and HDMI Input True 10 bits Color processing engine Independent color management(ICM) Dynamic contrast control(DCC) Supported 1080p Full HD. Build-in 2W+2W speaker VESA standard bracket 100mm . Wall mountable capability. Operating Instructions Key Board 1. Power Push to turn on and turn off the unit. LED Green light: Power on LED Red light: Standby mode. 2. 3. Adjust UP /DOWN UP: Used as UP function. Or Increase value on the OSD Menu. And as a hot key for color adjust function. DOWN: Used as DOWN function. Or Decrease value on the OSD Menu And as a hot key for auto adjust function. 4. Item: Hot key for OSD adjustments of Volume , Contrast, Brightness, and Red, Green, Blue. 5. Menu Push to call out OSD menu. Or Used as Confirm function in OSD Menu. 6. Source Select input signal from D-SUB, HD,DVI . KEY Lock Function: Push "Menu" and "Item" , OSD of screen will show "Key Lock on", Into key lock mode. And push again , OSD of screen will show "Key Lock off ", Into key unlock mode. 4 IR remote control(option) 1. Power Push to turn on and turn off the unit. LED Green light: Power on LED Red light: Standby mode. 2. 3. Adjust UP /DOWN UP: Used as UP function. Or Increase value on the OSD Menu. And as a hot key for color adjust function. DOWN: Used as DOWN function. Or Decrease value on the OSD Menu. And as a hot key for auto adjust function. 4. Item: Hot key for OSD adjustments of Volume , Contrast, Brightness, , and Red, Green, Blue. 5. Menu Push to call out OSD menu. Or Used as Confirm function in OSD Menu. 6. Source Select input signal from D-SUB, HD,DVI . (6) (2)(3) (1) (4) (5) 5 Connection: HDVS Series OSD Function Color Image Setting OSD Menu Signal Source Audio Misc. Back Color: Contrast Adjust background black level of the screen image. Brightness Adjust fore ground white level of the screen image. Color Adjust Adjust Red, Green, Blue, color deepness for Users. Color Temp Adjust color temperatures for users. 9300, 6500, 5800, sRGB, USER Back Exit OSD menu. Image Setting: Clock Adjust image distortion appearing as vertical or "noise" on the screen. Phase Adjust image distortion appearing as horizontal or "noise" on the screen. Sharpness Adjust the clarity and focus of the screen images. H. Position Move the screen image left or right. V. Position Move the screen image up and down. Back Exit OSD menu. 6 OSD Menu: OSD H. Pos Move the OSD menu position left or right. OSD V. Pos Move the OSD menu position up or down. OSD Timer Set the OSD menu display time. Language Select the desired language as English, French, German, Spanish, Traditional Chinese Simplified Chinese, and Japanese. Back Exit OSD menu. Signal source Select the input signal D-sub, HD, DVI. Back Exit OSD menu. Audio Volume Control built-in speakers' output Volumes Mute Disable the unit's sound output Back Exit OSD menu. .Misc: Auto Adjust Adjust the best image. Color Adjust Adjust the best image color. Reset Return to factory default setting. Obiter (Screen Saver) Use the manual buttons to on/off the screen saver Exit: Exit the OSD menu. PC Timing Mode Resolution 1 800*600@60 2 800*600@72 3 800*600@75 4 1024*768@60 5 1024*768@70 6 1024*768@75 7 1280*1024@60 8 1280*1024@75 9 1360*768@60 10 1920*1080@60 7 LCD monitor Mounting Guide A .Wall mount/ VESA Bracket Free your space with wall mount design. Please follow the fix-hole size in back panel to install the LCD to the wall. 8 Specification Monitor model LCD panel Active area (mm) Picture format Max. resolution Pixel pitch (mm) Colours Brightness Contrast Response time(Tr/Tf) View angle (U/D/L/R) HDMI input Audio input(R/L) PC input 1852CSH 18.5" 408.96x 230.04 16: 9 1920x1080 0.213 x 0.213 16.7M 1000 cd/m² [LED] 1000 :1 10/10 ms 89/89/89/89 1x HDMI (A Type) 1x (RCAx2) 1x VGA input (D-Sub 15 pin) 1x DVI-D input Earphone out 1xPhone jack ,3.5 Speaker Touch screen type Touch screen Hardness Touch point 2x built-in speaker (2 watt) Projected capacitive multi-touch screen 6H Single/multi Touch screen input method Touch screen Transparency Touch screen controller OSD setting Power input Power consumption Finger 86% USB Yes DC12V~26V Approx. 35 watt Dimensions (WxHxD) mm 443.4X274.0X63.5 Weight Operating temperature 4.3kg -20° to 70° C Subject to technical changes without prior notice. 9 Appendixes Troubleshooting The tables provided below include some problems that the user may encounter while using the display and the corresponding solutions. Please refer to the contents of this section prior to contacting service personnel. Problem Possible Causes Solutions 1. Is the power cable connected to the 1. Make sure the power cable has been unit? properly connected to the unit. 2. Is the unit turned on? 2. Turn on the unit. 3. Is the signal cable connected to the 3. Make sure the signal cable has been No picture unit? properly connected to the unit. 4. Is the unit in power saving mode? 4. Press any key on computer keyboard. Strange color Picture distortion 1. Is the signal cable connected to the 1. Make sure the signal cable has been unit? properly connected to the unit. 1. Is the signal cable connected to the unit? 2. Is the video input signal within the unit's specified frequency range? 1. Make sure the signal cable has been properly connected to the unit. 2. Make sure the input signal is within the unit's specified frequency range. 1. Have the unit's brightness and Picture is too contrast settings been set to the dim lowest level? 1. Adjust brightness and contrast 1. Is the connection of the input Only sound but signal correct? no picture 1. Check connection of input signal. 2. Make sure the signal cable has been properly connected. Only picture but no sound 1. Is the signal cable connected to the unit? 2. Has the volume been set to the min level? 3. Is the audio cable connected to the unit? 1. Make sure the signal cable has been properly connected to the unit. 2. Adjust the volume to an appropriate setting. 3. Make sure the audio cable has been properly connected to the unit. Please contact the customer service center of your local dealer if you have any questions regarding the unit after reading the information provided above. 10Microsoft Office Word 2007