Manuals+

EK-Scalar Terminal Installation Guide

Compatible with EK-Vector GPU blocks.

Attaching the EK-Scalar Terminal

Please follow these steps to install any EK-Scalar terminal to your graphics card's water blocks:

  1. Remove the cover from your water block terminal. Be careful not to pull on any LED wiring, as this may damage soldered joints.
  2. Remove the pre-installed Terminal from each water block. Unfasten the three (3) M4 screws using the supplied 2.5 mm Allen (hex) key.
  3. Install the gaskets (OR 15 x 1 mm) into the grooved slots on your new EK-Scalar terminal. Ensure the gaskets are installed correctly. Each water block or blank link requires two (2) gaskets.
  4. Secure the new EK-Scalar Terminal to each water block using the enclosed M4 x 20 DIN7984 screws with the supplied 2.5 mm Allen (hex) key.
  5. Plug all remaining unused G1/4 threaded ports, if any, using the 6mm Allen (hex) key and install your tube fittings for both inlet and outlet.

Diagram Description: The diagram shows an EK-Scalar Terminal being attached to two water blocks. It indicates the EK-Scalar Terminal, the OR 15 x 1 mm gaskets, and the M4 x 20 DIN 7984 screws.

Choosing Inlet and Outlet Ports

EK-Scalar Dual and Triple (parallel terminals)

EK-Scalar terminals are designed to provide several different flow configurations, depending on the layout of your loop.

While it may not be optimal for thermal performance, it is also possible to configure your EK-Scalar terminal in parallel with an additional water block, such as a CPU block or monoblock. Ensure that the flow rate of the loop is sufficient and each block has similar restriction, so that each individual block receives adequate flow.

Diagram Description: Multiple diagrams illustrate different flow configurations for EK-Scalar Dual and Triple terminals, showing various inlet and outlet port arrangements with arrows indicating the direction of coolant flow.

EK-Scalar Quad (semi-parallel terminals)

Diagram Description: Diagrams show EK-Scalar Quad terminals with specific port configurations labeled as "No inlet or outlet possible," indicating restricted flow options.

Support and Service

For assistance, please contact:

http://support.ekwb.com/

EKWB d.o.o.
Pod lipami 18
1218 Komenda
Slovenia - EU

Social Media

PDF preview unavailable. Download the PDF instead.

6f1417262ed260dad1c3a1249658e1298d10be0878e9118f1c1fe994068e5b71 ?v=1731049604 Adobe InDesign CC 13.1 (Windows) Adobe PDF Library 15.0

Related Documents

Preview EKWB EK-FC Terminal User Guide: Installation and Flow Configuration
Comprehensive user guide for the EKWB EK-FC Terminal, detailing serial vs. parallel flow configurations, port selection, and step-by-step installation instructions for various models.
Preview EK-FC Terminal System Installation Manual | EK Water Blocks
Comprehensive installation guide for the EK-FC Terminal system from EK Water Blocks, detailing serial vs. parallel flow, port configuration, and assembly steps for PC water cooling setups.
Preview EK-Quantum Scalar² SFF Terminal User Guide | Installation & Specs | EKWB
User guide for the EK-Quantum Scalar² SFF Terminal by EKWB. Provides installation instructions, product dimensions, technical specifications, fitting guidance, leak testing procedures, warranty information, and support contacts for PC liquid cooling enthusiasts.
Preview EK-Quantum Vector Aorus RTX 2080 D-RGB Water Block Installation Manual
Detailed installation guide for the EK-Quantum Vector Aorus RTX 2080 D-RGB water block, covering preparation, assembly, and connection for PC liquid cooling systems. Includes component lists, step-by-step instructions, and visual descriptions.
Preview EK-Pro GPU WB RTX 30x0 Water Block Installation Guide
Comprehensive user guide for installing the EK-Pro GPU WB RTX 30x0 water block. Includes detailed instructions on unboxing, preparing the graphics card, applying thermal compound and pads, mounting the water block and backplate, checking contact, leak testing, and support information.
Preview EKWB Upgrade Kit RGB Installation Manual
Detailed installation guide for the EKWB Upgrade Kit RGB, providing step-by-step instructions for replacing the stock top and terminal of compatible EK water blocks with RGB-enabled components. It covers removal of the existing water block, cleaning the GPU, and installing the new RGB top and terminal. Essential safety guidelines and required tools are also included.
Preview EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate User Guide
Comprehensive installation guide for the EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate, detailing components, specifications, step-by-step assembly, and testing for custom PC liquid cooling systems.
Preview EK-FC1080 GTX G1 Water Block Installation Manual
Detailed installation guide for the EK-FC1080 GTX G1 water block, covering preparation of the graphics card, installation of the water block, and final system integration.