XGIMI MoGo 4 Projector User Manual
Model: MoGo 4
Introduction and Safety Information
This document serves as the user manual for the XGIMI MoGo 4 projector. It provides essential information for setup, operation, and maintenance. Please read all safety instructions and guidelines carefully before using the product.
General Safety Precautions:
- Do not expose the device to rain or moisture.
- Avoid placing the device in direct sunlight or near heat sources.
- Ensure proper ventilation to prevent overheating.
- Do not attempt to disassemble or repair the device yourself.
- Keep the device away from children.
- Use only the provided power adapter.
(Note: Detailed safety, warranty, and regulatory information in multiple languages is provided in the original document. This section summarizes key points in English.)
Device Ports
The XGIMI MoGo 4 features several ports for connectivity:
- DC IN: Connect the power adapter here to supply power to the device.
- HDMI: Connect external devices such as laptops, game consoles, or Blu-ray players via an HDMI cable for video and audio output.
- USB: Connect USB storage devices (e.g., flash drives) to play media files or for firmware updates.
- Audio Out: Connect external speakers or headphones using a 3.5mm audio cable for enhanced sound.
(Diagram Description: The rear panel of the MoGo 4 projector displays these ports arranged for easy access.)
Remote Control
The remote control allows for convenient operation of the MoGo 4 projector. Below is a description of its buttons and functions:
Remote Control Buttons:
- Power Button ?: Turns the projector on or off.
- Directional Pad (Up ⬆️, Down ⬇️, Left ⬅️, Right ➡️): Navigates through menus and options.
- OK Button: Confirms selections and opens menus.
- Back Button ↩️: Returns to the previous screen or menu.
- Home Button ?: Accesses the main menu or home screen.
- Volume Up Button ?⬆️: Increases the audio volume.
- Volume Down Button ?⬇️: Decreases the audio volume.
- Mute Button ?: Mutes or unmutes the audio output.
- Focus Button [focus-adjust]: Adjusts the focus of the projected image.
Remote Control Button Functions Table:
| Button Label | Function |
|---|---|
| Power | Turn on/off |
| Directional Pad | Navigation |
| OK | Confirm selection |
| Back | Go back |
| Home | Home screen |
| Volume + | Increase volume |
| Volume - | Decrease volume |
| Mute | Mute/unmute |
| Focus | Adjust focus |
(Diagram Description: The remote control is depicted with each button clearly labeled. Another diagram shows how to hold the remote for optimal use.)
Remote Control Pairing
To use the remote control, it may need to be paired with the projector. Follow these steps:
- Ensure the projector is powered on.
- Press and hold the 'Home' button ? and 'Back' button ↩️ simultaneously on the remote control for approximately 5 seconds.
- The projector will indicate when pairing is successful.
(Note: If pairing fails, ensure the remote is within range and try again. Check battery levels.)
Smart Light Mode
The Smart Light Mode feature adjusts the projector's brightness and color temperature based on ambient lighting conditions, providing a more comfortable viewing experience.
To activate Smart Light Mode:
- Navigate to the projector's settings menu.
- Select 'Display' or 'Picture' settings.
- Find and enable 'Smart Light Mode'.
The projector will automatically adapt to the room's lighting. You may also find options to manually adjust the intensity of this feature.
(Diagram Description: An illustration shows the projector in a room with varying ambient light, demonstrating how the Smart Light Mode adjusts the projected image for optimal viewing comfort.)
Additional Information
This section may contain further details on troubleshooting, software updates, or advanced settings not covered in the main sections.
(Note: The original document contains extensive details across multiple languages. This HTML version focuses on the core functionalities and English content for clarity and conciseness.)
