User Manual for RunCam models including: 25210, 5 Orange 4K HD Action Cam
WiFi Nonsupport Shutter Auto 1/30 1/60 1/120 1/240 ISO USB Power Input Communication Interface Micro USB NOTICE: Use carefully when handling memory cards. Avoid liquids, dust, and debris. As a precaution, power off the camera before inserting or removing the card. Check manufacturer guidelines regarding use in acceptable temperature ranges.
RunCam 5 Orange. 6TFS.BOVBM. eInstruction Diagram.
File Info : application/pdf, 1 Pages, 120.84KB
DocumentDocumentRunCam 5 Orange 6TFS.BOVBM eInstruction Diagram 1 2 3 4 5 6 1 Shutter Button 4 SD Card Slot 2 Camera Status Light (LED) 5 SD Card Locking Door 3 Reset Button 6 Micro USB Port Charging Micro USB port supports DC 5-15V power supply. A DC 5V 1~2A charger is recommended. The Red LED will turn on during charging and turn off when charging is complete. It takes about 2 hours to get fully charged. Low Battery Warnings When powered on, if the charge is less than 25%, the Blue LED will continue to flash for 3 seconds. eBasic Camera Operation Powering On/O · Long press the Shutter button with Green LED on, the camera is under standby mode. Mode Switch · Double-click the Shutter button to cycle through the recording mode (Green LED), setting mode (Blue LED) Recording On/O · In the recording mode, click the Shutter button to start recording, the green light flashes; click the Shutter button again, the recording stops, the green light stops flashing. Parameter Settings · Set in the RunCam App Forced Shutdown · Simultaneously press the Shutter button and Reset button. Formatting · In standby mode. Triple-click the Reset button, with a long beep and Green LED blinks three times. Reset · In standby mode. Long press the Reset button, with three beeps and Blue LED blinks three times. emicroSD Card Insert the microSD card as indicated by the icon next to the card slot. Use brand name memory cards (sold separately) that meet these requirements: · microSD, microSDHC, or microSDXC · U3 recommended (2.7K50/2.7K60 1080P120 requires U3 or above; other resolutions require U1 or above) · Capacity up to 128GB NOTICE: Use carefully when handling memory cards. Avoid liquids, dust, and debris. As a precaution, power off the camera before inserting or removing the card. Check manufacturer guidelines regarding use in acceptable temperature ranges. Abnormal SD Card Status: If the blue light continues to flash quickly after powering on, it indicates that the SD card is not inserted, or full or cannot be recognized. eConnection to Computer After turning on the camera, connect it to the computer via USB cable, then it will be recognized as a removable disc. NOTICE: If the camera can not be recognized by the computer after connecting, please make sure that a microSD card is well inserted. If the information on microSD card can not be read normally, please try with another micro USB cable or USB port on the computer. eFirmware Upgrade To ensure that the camera performs optimally, please use the latest firmware. Update method here: https://runcam.com/download/runcam5or. eVideo Bitrate and Codec Resolution Video Quality High Medium Low Codec 4K@30fps 60Mbps 50Mbps 40Mbps 2.7K@60fps 60Mbps 50Mbps 40Mbps 2.7K@50fps 1440P@60fps 60Mbps 40Mbps 50Mbps 30Mbps 40Mbps 20Mbps H.264 1080P@120fps 1080P@60fps 60Mbps 45Mbps 50Mbps 30Mbps 40Mbps 22Mbps eParameter Image Sensor Video Resolution Field of View (FOV) Video File Format SONY IMX 377 (12MP) 4K@30fps/2.7K@60fps/2.7K@50fps/ 1080P@120fps/1080P@60fps/1440P@60fps 145° MP4 TV-OUT Communication Interface Support Micro USB microSD Card supported Up to 128G. Samsung's U3 card is recommended (2.7K50/2.7K60 1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the le format of the SD card is FAT32, otherwise, it will easily cause errors. WiFi Shutter ISO USB Power Input Nonsupport Auto 1/30 1/60 1/120 1/240 Auto/100/200/400/800/1600/3200 DC 5-15V Battery Capacity Power Consumption 900mAh Max 620mA @5V Dimension Net Weight 38*38*36mm 56g (with battery) eTechnical Support Please visit: https://support.runcam.comAcrobat Elements 9.0.0 (Windows)