WIFICAMERA Quick Manual

Step 1: Download and Install the App

Tip one: Scan the QR code below to download the "iCSee" App. [QR code for iCSee app download]

Tip two: Search "iCSee" in the App store and download.

Step 2: Turn On the Power

Power on the camera. The device will send a prompt like "system starting up, wait be configured, wait for the connection, please configure the network according to the instructions" after several seconds. If the camera does not provide a prompt sound for a long time, press and hold the camera Reset button until you hear "Restore factory settings, please do not power off", then release it to restore the camera to factory settings and configure the network.

Note: If you need local storage, please install the memory card first, then power on the device. The memory card does not support hot swapping; please plug and unplug the memory card when the device is powered off. Cloud storage is recommended for safety and convenience. See "Step 4" for details.

Step 3: Configure the Network of the Camera

Bluetooth Network Configuration

Note: If the device supports Bluetooth network configuration, please configure it as follows:

1. Connect your phone to a WiFi network and turn on Bluetooth.
2. Open the iCSee app, register an account, and log in. [Figure 1: Login screen showing fields for Username, Password, and buttons for Sign Up, Login, Visitor Login, and Forget Password]

After successful login, click the "+" button in the top right corner of the screen [Figure 2: App screen showing "Smart Device" with a "+" button].

Click on the main interface to search for found devices [Figure 3: App screen showing "Add Device" with options like "Search the devices", "Add device manually", "WiFi Camera", "4G Camera", etc.]. If the camera is not searched, turn off the phone's Bluetooth for 5 seconds, turn it back on, then search again, or long-press the camera Reset button to reset and search again.

Enter the wireless router password and click "Confirm" [Figure 4: App screen showing "Router Setting" with Wi-Fi selection and password input].

Wait for the camera network configuration. When the camera emits the voice message "connecting, please wait, connect router successfully", the network configuration is successful [Figure 5: App screen showing "Initializing device configuration" progressing to "Connecting, Please Wait"].

After the network configuration is successful, set the camera name [Figure 6: App screen showing "Set a Camera Name" with options to name the device like "Living Room", "Bedroom", etc.].

Follow the APP interface to guide you through the setup. After configuration is completed, the device is displayed in the device list interface. Click to open the real-time preview screen and carry out relevant operations and settings [Figure 7: App screen showing a device list with a preview of a camera feed].

WiFi Network Configuration (Alternative)

Note: If the device does not support Bluetooth network configuration or Bluetooth configuration fails, configure it as follows:

1. Connect your phone to the WiFi network.
2. Log in to the iCSee App, click "+" to add devices [Figure 8: App screen showing "Add Device" options] and select "WiFi Camera" [Figure 9: App screen showing "Add Device" with "WiFi Camera" selected].
3. Set network configuration according to the camera's voice prompts and the APP interface step-by-step guide. When the camera emits "Connect router successfully", the network configuration is successful.
4. After network configuration is successful, follow the instructions on the APP interface to set the camera password and name.
5. Once configuration is complete, the device appears in the device list. Click to open the real-time preview screen and perform operations/settings [Figure 10: App screen showing a device list with a camera preview].

Step 4: Cloud Storage

To open cloud storage, click the "cloud" icon in the device list interface [Figure 11: App screen showing a device list with a "cloud" icon]. Follow the app guidance to understand and open cloud storage packages, which are available in various options.

FAQ

Q: How do cameras store video?

A: 1. Local TF card storage: Maximum support up to 128G TF card. After full, it automatically deletes earlier video and overwrites it. 2. Cloud storage.

Q: What to do if the camera is not connected or offline?

A: 1. Check if the camera power or router network is normal. 2. Plug in the camera power to restart the camera. 3. Restore the camera to factory settings.

Q: Is 5G router supported?

A: If you use a 5G router, and 5G and 2.4G use the same connection hotspot (i.e., the SSID is the same), you can connect directly. If 5G and 2.4G do not use the same connection hotspot (i.e., the SSID is different, generally the SSID of 2.4G is xxxxx-2.4G, and the SSID of 5G is xxxxx-5G), please connect your mobile phone's WiFi to the xxxxx-2.4G hotspot of the router before configuring the camera.

Notice

1. Please change the user password while using this product to avoid unauthorized use by criminals.
2. Do not install the device in a place that is damp, dusty, or accessible to children.
3. Please use and store within the allowable temperature and humidity range, and do not disassemble the equipment at will.

Directions

1. Please refer to the actual product; the manual is for reference only.
2. The APP and product firmware will be updated from time to time. You can upgrade to the latest firmware online yourself without notice. The manual is for reference only.
3. The manual may contain technically inaccurate parts or parts that are inconsistent with product functions or printed errors. Please refer to the company's final interpretation.