Industrial StrongArm™

Barrier Arm Operator

Very long arms from 10 - 36 ft

Hydraulic barrier arm gate known for its reliable service life and arms long enough to control two lanes of traffic.

Key Features

  • ?Very long arms, from 10 to 36 ft
  • Raise a 36 ft arm in 8 seconds or 10 ft arm in only 2 seconds
  • ⬆️Full 90° open on arms up to 28 ft prevents tall vehicles from clipping arm
  • ?UPS models retain full functionality during an AC power outage***
  • ⚙️Field programmable to specific site requirements
  • ?Dual or sequenced gate integration
  • ?Easy system troubleshooting with onboard event log
  • ?️DOT model with standard galvanized steel chassis and breakaway arm bracket
  • ?14F features highly visible lighted arm and resilient bumper
  • ?14F model In case of vehicle strike, arm breaks away and arm motion stops, protecting pedestrians, facility and operator/arm
  • ?5 year warranty

Applications

Military: Image depicting a StrongArm barrier arm operator at an industrial or military site entrance, with an airplane in the background.

Aviation: Image showing multiple StrongArm barrier arm operators installed in a row, suitable for aviation facilities.

Transit: Image of a StrongArm barrier arm operator managing traffic flow on a road, with a 'max' speed indicator visible.

10 StrongArm™ Models Comparison

Model Part# Duty Cycle Horsepower Drive Open/Close Time Arm Length Max.* Arm Design Full Open Angle Temperature Rating 1 Phase Power 3 Phase Power Communication User Controls Relays Finish ETL Listed (UL 325) Warranty
StrongArm 14F (FAST) HTG 320-2 ST Hydraulic 2 seconds to open; 3 seconds to close Up to 14 ft (4.3 m) Side mount. Lighted aluminum arm with HyProtect™ breakaway arm mount and kill switch, up to 14 ft (4.3 m) 90° -40° to 158° F (-40° to 70° C) 115/208/230V 60 Hz, 110/220V 50 Hz 208/230/460V 60 Hz, 220/380V 50 Hz RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software. Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs Zinc plated with yellow powder coating Usage Class I, II, III, IV 5 year
StrongArm 20 (STANDARD) HTG 320-3 ST 2,000 cycles/day 3/4 hp Hydraulic 3 seconds to open; 4 seconds to close Up to 20 ft (6 m) * Side mount available for arms up to 18 ft (5.5 m) Side mount - aluminum up to 18 ft (5.5 m), fiberglass up to 16 ft (5 m) or wood up to 14 ft (4.3 m). Center yoke mount - aluminum up to 20 ft (6 m) 90° Hot dipped galvanized with stainless steel cover
StrongArm 28 (LONGEST ARMS) HTG 320-6 ST 2,000 cycles/day 3/4 hp Hydraulic 5 seconds to open; 6 seconds to close Up to 28 ft (8.5 m)* Center yoke. Aluminum up to 24 ft (7 m), fiberglass up to 16 ft (5 m), or aluminum-fiberglass 26+ ft (8+ m) Adjustable 86° ± 2°
StrongArm 36 (LONGEST ARMS) HTG 320-8 ST 2,000 cycles/day 3/4 hp Hydraulic 8 seconds to open; 8 seconds to close Up to 36 ft (11 m)** Center yoke. Aluminum-fiberglass up to 36 ft (11 m) 90°
StrongArmDOT 28 (DOT) HTG 320-6 DOT ST 2,000 cycles/day 3/4 hp Hydraulic 5 seconds to open; 6 seconds to close Up to 28 ft (8.5 m)* Center yoke. Breakaway arm bracket. Aluminum arms up to 24 ft (7 m) or aluminum-fiberglass arms 26 and 28 ft (8 and 8.5 m) * 90°

* Arms 20 ft (6 m) or longer require counterweights.

** Arms 30 ft (9 m) or longer require cable tensioner and arm stabilizer kit and additional counterweights.

*** The operator's normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage.

† Refer to Installed Options on pricing for all 50Hz voltages, which are special order.

†† 115V DC Power Supply requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.

UPS Battery Backup Power Options

StrongArm 14F UPS StrongArm 20 UPS StrongArm 28 UPS StrongArm 36 UPS StrongArmDOT 28 UPS
DC Power Supply
AC Power Supply with HyInverter AC StrongArm 14F StrongArm 20 StrongArm 28 StrongArm 36 StrongArmDOT 28

Optional Accessories

  • Oval Aluminum Arm (10, 12, 14 ft)
  • Flashing Light Kit
  • Hy5B™ Vehicle Detector
  • Hy8Relay™ Module
  • HyNet™ Gateway Integration
  • Heater Kit

See website for complete list.

Support and Contact

SYSTEM DESIGN SUPPORT: Contact HySecurity for help with custom site requirements, CAD drawings, tech manuals or other specifications support.

VISIT WWW.HYSECURITY.COM for installation manuals, parts diagrams, wiring diagrams, specifications, image gallery, videos, training and much more.

Manufacturer of industrial and hostile vehicle mitigation barriers, gate operators and accessories.

Contact HySecurity for an operator/parts distributor near you.

Phone: 253-867-3700 | 800-321-9947

Website: www.hysecurity.com | Email: sales@hysecurity.com

MADE IN THE USA WITH GLOBAL MATERIALS

HTG 320 Literature PDFium PDFium

Related Documents

Preview HySecurity StrongArm M30/M50 Barrier Arm Programming and Operations Manual
Comprehensive guide to the HySecurity StrongArm M30 and M50 crash-rated barrier arms, covering installation, operation, safety, and maintenance. Learn about components, safety features, and compliance standards.
Preview HySecurity StrongArm M30/M50 Crash Barrier Authorization Training
Information about the HySecurity Crash Authorization Training event for StrongArm M30 & M50 Anti-Ram Crash Barriers, covering installation, programming, and troubleshooting. Includes date, time, location, and contact details for RSVP.