User Guide for AceMining models including: Door Reinforcement Lock 800lbs, Door, Reinforcement Lock 800lbs, Lock 800lbs
AceMining Door Reinforcement Lock Withstands 800lbs of Force - Silver Extra Door Lock with 8 Screws Prevents Unauthorized Entry,Add a Door Security Lock for Home Safety & Privacy : Tools & Home Improvement
File Info : application/pdf, 2 Pages, 950.00KB
DocumentDocumentAceMining Security Door Lock Installation Instructions Warranty Service: Free refund for any problem within two years Customer Service Contact Email:customerservice@aceminingus.com Locked Tool Required Electric drill and drill bit Pencil Installation Steps Hammer side Chisel Unlocked NOTE: 1. If the gap between the door edge and the jamb is not enough to put down the mounting plate of the security door lock, you need to use the hammer side and chisel. 2. Always PRE-DRILL HOLES with electric drill to prevent screws from damage before installing the screws. Fig.1 Step 1: Test whether it fits well between the door edge and the jamb When the door is closed and the door lock is in a LOCKED position. If they are not suitable, you need to use a wooden chisel to make a groove in the door frame to make the door to close normally. - 1 - - 2 - - 3 - Fig.2 Step 2: Choose the location for the security door lock on the interior side of an inward swinging door, make a mark with a pencil - 4 - Fig.3 Step 3: Pre-drill hole before drilling the short screw into the oblong hole with a power drill. Close the door and the security door lock to assure proper position. - 5 - Fig.4 Step 4: Pre-drill holes before drilling the screws into other 3 holes with a power drill, then test for proper operation. We recommend using short screws first. Please make sure your door frame is thick enough if you want to use long screws. - 6 - FAQ: Q: What if screws are broken during installation A: Please pre-drill holes and do not use excessive speed during installation. We offered 8 alteratives in the package(4 short ones and 4 long ones) Q: What to do if the rubber strip falls off? A: The rubber strip is detachable. Install video: https://youtu.be/0v1w9b00OoQ Q: What if the surface of the lock is flawed, or the lock is damaged after using it for several days? A: Just contact us and we will re-send you a new Warranty Dear costumer,Thanks so much for choosing AceMining, for warranty service and support, please contact our service team.AceMining promise: FREE RETURN, FREE REPLACEMENT or FULL REFUND to solve your issue and make you satisfied. - 7 -