Instruction Manual for Q-Tran models including: QZ-DMX 24V LED Driver, QZ-DMX, 24V LED Driver, LED Driver, Driver

QZ-DMX Applications/Install

QZ-DMX | 24V DMX LED Driver | Q-Tran


File Info : application/pdf, 5 Pages, 1.18MB

PDF preview unavailable. Download the PDF instead.

INSTALL-PSC-QZ-DMX 1-4ch ?d=219202442509
INSTALLATION LED POWER SUPPLY - QZ-DMX
TOP VIEW
1 4
DRIVER COMPARTMENT
WIRING COMPARTMENT
3 2

· Must be installed by licensed electrician. · Installation must be in accordance with DMX512-A standard · DMX Shield must be grounded to Earth Ground at a single point external to power supply
QZ Components

1 Driver Compartment 2 Wiring Compartment 3 Mounting Tab Slots

4 Mounting Tab Holes

© 2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-02-19-24

INSTALLATION LED POWER SUPPLY - QZ-DMX

Required Hardware
#6 Flat head screw

0.27"

0.75"

Mounting Foot:

3.1" 1.8"

4.9" 3.6" 2.9"

96W
Mounting

1

The QZ-DMX can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on the

bottom of the enclosure

CENTER HOLE

SIDE SLOTS

2 The QZ must be mounted into a stud for sufficient support, using either the center holes or the slots of each mounting tab

CENTER HOLE

SIDE SLOTS

© 2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-02-19-24

INSTALLATION LED POWER SUPPLY - QZ-DMX
3 When installing multiple QZ power supplies, seperate the enclosures by 3" of space from edge to edge. This prevents the
rise of ambient temperature between the power supplies.

3.0"

3.0" 3.0"

Horizontal mount illustrated above

Vertical mount illustrated above

© 2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-02-19-24

INSTALLATION LED POWER SUPPLY - QZ-DMX

4 Wiring diagram

96W, 1 CHANNEL

AC INPUT

DMX

OUTPUT

96W, 2 CHANNEL

AC INPUT

DMX

OUTPUT

D+ D_
GND
Cool _ Warm _
LED

D+ D_
GND
LED

96W _

HOT

+

NEU

GND

DMX Controller

96W, 3 CHANNEL

AC INPUT

DMX

OUTPUT

+

HOT

NEU

GND

DMX Controller

96W

96W, 4 CHANNEL

AC INPUT

DMX

OUTPUT

D+ D_
GND
R_ G_ B_ W_
LED

D+ D_
GND
R_ G_ B_
LED

+
HOT

NEU

GND

DMX Controller

96W

+
HOT

NEU

GND

DMX Controller

96W

Wiring from power supply to light fixture must be single multiconductor cable

© 2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-02-19-24

INSTALLATION LED POWER SUPPLY - QZ-DMX

QZ-DMX 96W

TOP VIEW 9.5"

3.1" 1.8"

DRIVER COMPARTMENT WIRING COMPARTMENT

3.6" .36"

WIRING COMPARTMENT VIEW

8.60"

Ø.87"

4.90"

1.58"

WIRING COMPARTMENT

DRIVER COMPARTMENT

© 2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-02-19-24



References

Adobe PDF Library 17.0 Adobe InDesign 19.2 (Windows)