Product Overview
The Televes NevoSwitch MS532C is a high-quality multiswitch designed for efficient satellite and terrestrial TV signal distribution. It features 5 inputs, including one for terrestrial signals and four for satellite polarities, and provides 32 user outputs. This cascadeable device is equipped with a 12dB potentiometer on each user output, allowing for individual signal level optimization. It facilitates a transition from a star topology to a cascadeable system with a simple switch.
Key Features:
- 12dB potentiometer for individual user output level optimization.
- Switch for powering terrestrial preamplifiers or for current passage.
- Powering from satellite receiver without additional power supply (requires active STB).
- Powering via Voltage Loop (VL).
- Current passage between all inputs and outputs.
- Active terrestrial input.
- ECO mode available.
- Switch for changing between cascadeable and terminal modes.
- 12V power supply.
- Reduced power consumption.
- Color-coded inputs and outputs for easy identification.
- European design, quality, and manufacturing.
Technical Specifications
| Characteristic | Value |
|---|---|
| Number of inputs | 5 |
| Number of cascade outputs | 5 |
| Number of user outputs | 32 |
| TERR. Bandwidth | 47 ... 862 MHz |
| SAT. Bandwidth | 950 ... 2400 MHz |
| TERR. Input Level | 92 dBμV |
| SAT. Input Level | 105 dBμV |
| TERR. Passage Loss | 9 dB |
| SAT. Passage Loss | 6 ... 16 dB |
| TERR. Tap Loss (outputs 1-8) | 2 dB |
| SAT. Tap Loss (outputs 1-8) | 1 dB |
| TERR. Tap Loss (outputs 9-16) | 4 dB |
| SAT. Tap Loss (outputs 9-16) | 2 dB |
| TERR. Tap Loss (outputs 17-24) | 6 dB |
| SAT. Tap Loss (outputs 17-24) | 5 dB |
| TERR. Tap Loss (outputs 25-32) | 8 dB |
| SAT. Tap Loss (outputs 25-32) | 8 dB |
| Tap Regulation | 0 ... 12 dB |
| H/V Isolation | > 30 dB |
| User Isolation | > 25 dB |
| Supply Voltage | 12 Vdc |
| Max. Current (PSU) | 210 mA |
| Max. Current (STB) | 35 mA |
| Operating Temperature | -5 ... 45 °C |
| Protection Index | IP20 |
Physical Data and Packaging
| Attribute | Value |
|---|---|
| Net Weight | 1.639,00 g |
| Gross Weight | 1.759,00 g |
| Width | 137,00 mm |
| Height | 513,00 mm |
| Depth | 29,00 mm |
| Main Product Weight | 1.627,00 g |
Packaging: Box, 1 piece
Design Aspects: The device is noted for its very compact design and construction from zamak, contributing to its durability and quality.
Diagrammatic Representations
Product Image: The Televes NevoSwitch MS532C is depicted as a black, rectangular device featuring numerous coaxial connectors and indicator LEDs on its front panel, designed for professional AV distribution systems.
System Installation Diagram (Page 3): This diagram illustrates a typical building television distribution setup. It shows signals from a satellite dish (OFFSET LNB QUATTRO) and a terrestrial antenna being fed into a Nevoswitch amplifier. The amplified signals are then distributed through a cascade of NevoSwitch and Multiswitch units (e.g., 5x5x16, 5x5x24, 5x5x32). Tap units (TAP 5x5x5) are used to branch off signals to different floors or zones within the building. The diagram also includes a Power Supply Unit (PSU) and DC blockers, indicating a comprehensive system design.
Simplified Connection Examples (Page 4): Two simplified wiring diagrams are provided. The first shows a satellite LNB (OFFSET LNB QUATTRO) and a terrestrial amplifier connected to the NevoSwitch. The system is powered by a satellite set-top box (STB) and an external PSU. The second diagram presents a similar configuration, with a crucial note: "*In this configuration, there should be at least one active STB to power the LNB." This highlights a specific power requirement for the LNB in certain operational modes.
References
Reference: 714507
Logic Reference: MS532C
EAN13: 8424450172841
