Instruction Manual for MIBOXER models including: K2, K2-B, K2S, K2S-B, K2-B Mini Remote, K2-B, Mini Remote, Remote
KPLED s.r.o. - Mini nástěnný ovladač Boxer pro jednobarevné a CCT LED, 2,4GHz, magnetický, K2S-B, černý, Mi-Light
RF ovladač Mi-Light K2S pro jednobarevné a CCT LED | 2,4GHz | bateriový | bílý | | LEDshopik.cz
RF ovladač Mi-Light K2S pro jednobarevné a CCT LED | 2,4GHz | bateriový | černý | LEDshopik.cz
Subordinate New Brand Mini Remote(2.4GHz) Model No.: K2 / K2-B / K2S / K2S-B Contents Product Features ....................................................................................................... 2 Product parameters ................................................................................................... 2 Buon Descripon .................................................................................................... 3 Install baery .............................................................................................................. 3 Instrucons for pairing/clearing codes with lamps ............................................... 4 Installaon Notes ....................................................................................................... 5 Aenon ..................................................................................................................... 6 1. Product Features Mini remote adopts 2.4GHz frequency with low power consumpon long distance transming, strong an-interference,and fast communicaon rate, Simply press the buon on the remote control, You can enjoy the comfortable lighng effect. Mini easy for using, Magnec installaon is very firm. Can control designated Mi-Light / MiBoxer 2.4G lamps, The color temperature and brightness of the light can be adjusted. Now start, let the light do whatever you want. 2. Product parameters Model No.: K2 / K2-B / K2S / K2S-B Working Voltage: 3V (CR2032 baery) Transming Power: 6dBm Standby Power Consumpon: <6A K2 / K2-B RF: 2.4GHz Working Temperature: -10~40°C Control Distance: 30m 60mm 86mm 86mm 9mm K2S / K2S-B 15mm 60mm 15mm 19.5mm 3. Buon Descripon Brightness+ Cool white(CCT-) Brightness- CR2032 Battery Purchased separately CR2032 3V 4. Install baery ON/OFF Warm white(CCT+) Link/Unlink 1. Open baery cover 2. Install the baery as photo cCR2032Purchased separately 5. Linking/Unlinking Note: Remote need link with lights before control light. Linking instrucon Power supply Light Power supply Light 1 Turn off light aer 10 seconds turn off 2 Short press "SET" 3 mes within 3 second when the light on 3 Light flashing 3 mes slowly means it is successfully Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can't link again) Unlinking instrucon Power supply Light Power supply Light 1 Turn off light aer 10 seconds turn on 2 Short press "SET" 5 mes within 3 second when the light on 3 Light flashing 10 mes slowly means it is successfully Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven't linked that don't need to unlink) 6. Installaon Notes K2 / K2-B: Method 1 1 2 3 4 Method 2 1 2 Take off the double-sided tape on the back of the base Sck the base well, and the remote control is magnecally aracted to the base K2S / K2S-B: 1 2 Take off the double-sided tape on the back of the base Sck the base well, and the remote control is magnecally aracted to the base 7. Aenon 1. This remote only control specified Mi-Light / Miboxer products; details please check manual. 2. This remote control is a precision electronic product, please do not use it in a humid or high temperature environment for a long me. When not in use for a long me, please take out the baery and store it in a dry, stac-free environment. 3. Do not use the remote control in a large area of metal or in an environment with strong electromagnec waves nearby, otherwise the control distance will be seriously affected. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)