Ceiling Lamp Installation
Model Specifications: 100-240V, 50Hz/60Hz, MAX: 60W
Diagram Description
The main diagram illustrates the assembly and installation of a chandelier-style ceiling lamp. It shows the lamp suspended by chains from a ceiling mount. Key components are indicated by numbers: the ceiling mounting hardware, electrical connections, chains, and the lamp body with multiple light fixtures.
An inset diagram shows electrical wiring connections, with labels 'L' (Live), 'N' (Neutral), and an Earth grounding symbol.
Additional icons are present, including:
- Electrical symbols: 'L' for Live, 'N' for Neutral, and a symbol for Earth grounding.
- Safety/Compliance icons: A house symbol with a line through it (indicating specific usage restrictions), 'F' in a circle (potential certification mark), a square with a tick inside (certification/compliance), and a square with a cross inside (prohibited use).
Installation Instructions
- Drill a hole in the ceiling.
- Insert the expansion bolt in the ceiling.
- Mount the crissbar by screws.
- Connect the cable.
- Mount the bracket.
- Put the lamp shade and light source.
Cautions
- Should be installed by professional person.
- During the cleaning and installation remember to cut the power off.
- Keep the lamps away from corrosive chemical and air such as acid and alkali.
- Do not wash it with water, but wipe it clean with a soft cloth.
Accessory List
| No | Part Name | Photo | QTY |
|---|---|---|---|
| 1 | Screw | [Image of screws and wall anchors] | 1 |
| 2 | hanging board | [Image of a metal mounting bracket with multiple holes] | 1 |
| 3 | Light Source | [Image of a stylized lamp holder with a chain] | 1 |
| 4 | The lampshade | [Image of a single lampshade] | 8 |
