Parts & Accessories
Processing QR Code
qr.ninjakitchen.com/powermixersystem
Patent Information | Shark® Patents | Ninja® Patents - SharkNinja
User Guide for NINJA Foodi models including: CI100 Series Power Mixer System, CI100 Series, Power Mixer System, Mixer System
CI100 Series Ninja Foodi Power Mixer System Quick Start Guide – Ninja Customer Service | Official Support & Help Center
File Info : application/pdf, 2 Pages, 1.10MB
DocumentDocumentWHAT'S INCLUDED Attachments & accessories vary by model. Power Base: Choose from multiple attachments and accessories to unlock an array of outputs for the power base. Hand Mixer Attachment: Power through any recipe with 5 mixing speeds. Hand Mixer Accessories: (vary by model) Two Beaters, Two Dough Hooks, and Single Whisk Immersion Blender Attachment: 2 blending speeds allow you to blend the toughest ingredients. Chopper Attachment: (not included with all models) Attach with power base to chop, mince, and puree ingredients. Storage lid included. 3-Cup Blending Vessel & Lid Perfectly designed for the immersion blender attachment so you can blend your favorite ingredients. NOTE: The 3-cup blending vessel is not microwave safe. CLEANING Unplug the power base before cleaning. Wipe the power base, hand mixer attachment, and chopper processing lid with a clean, damp cloth. The immersion blender, beaters, dough hooks, whisk, chopper bowl, blade assembly, and storage lid are all top-rack dishwasher safe. If hand-washing, wash in warm, soapy water. Use a dishwashing utensil with a handle when washing blade assemblies. WARNING: Handle the blade assemblies with care when washing, as the blades are sharp. Contact with the blade's edges can result in laceration. POWER MIXERTM SYSTEM Scan here to learn how to use your Power Mixer System, explore recipes, and purchase additional accessories! VISIT QR.NINJAKITCHEN.COM/ POWERMIXERSYSTEM OR SCAN HERE FOODI and NINJA are registered trademarks of SharkNinja Operating LLC. POWER MIXER is a trademark of SharkNinja Operating LLC. This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information. © 2022 SharkNinja Operating LLC CI100Series_QSG_MP_Mv11 Please make sure to read the enclosed Owner's Guide prior to using your unit. Quick Start Guide POWER MIXERTM SYSTEM NOTE: Attachments & accessories vary by model HAND MIXER IMMERSION BLENDER Assembly NOTE: Dough hooks not available with all models. 1 2 Install power base: Align the arrow on the power base with the arrow on the mixer attachment, then push the power base onto the attachment to lock it in place. TIP: Whisk can be installed in either slot. Using the Controls EJECT: Push to remove the beaters or other accessories. SPEED RANGE INDICATOR: LEDs illuminate to indicate speed settings 15. POWER: Press to turn the unit on and off. SPEED SELECTOR: Increase or decrease speed by pressing the up or down arrow. TURBO: Press and hold to quickly jump to speed 5. Disassembly Choose your accessory: Install both beaters, both dough hooks (not available with all models), or the whisk using the accessory slots on the mixer head. Insert the beater/dough hook with the collar into the slot with the diagram showing a collar. The whisk can be inserted into either slot. You will hear a slight click when locked into place. COLLAR NOTE: If using the whisk, do not insert a beater/dough hook in the other slot. Mixing Speeds SPEEDS 1 & 2: Use when combining dry ingredients, like flour, into liquid ingredients or for thicker doughs, such as bread dough. SPEEDS 3 & 4: Use for cookie doughs, batters, quick breads, frostings, and most other recipes. SPEED 5: Use speed 5 for whipping cream, mousse, or egg whites. NOTE: To prevent ingredients from splattering, start on a low speed, then slowly ramp up to the desired setting. 1 Eject accessory: Push the eject button on the hand mixer attachment to remove the beaters or other accessories. 2 Eject power base: Press and hold the release buttons on each side of the power base to detach. Assembly Install the power base: Align the arrow on the power base with the arrow on the immersion blender attachment, then push the power base onto the blender attachment to lock it in place. Disassembly Remove the power base: Press and hold the release buttons on each side of the power base to detach. Using the controls POWER: Press and hold continuously to blend. TURBO: While continuously holding to blend, press and hold the TURBO button to jump quickly to high speed. Blending Speeds LOW: Use to blend liquids, such as mayo or dressing, or soups and sauces with soft ingredients, such as tomato sauce. TURBO: Use for tougher ingredients, such as butternut squash, or for smooth purees, such as hummus. Blending 1 Choose your container: 2 Blending: The container should be large Submerge vents enough for the blender head of blender head to be fully submerged in the in the ingredients. ingredients. Once submerged, there should be ample room in the container to avoid overflowing and splashing. A cooking pot, large measuring container, or the blending Use an up-and-down motion to blend, making sure to stop blending any time the vents are no longer submerged. vessel (not included with all models) is recommended. NOTE: For best results, hold the unit with the control panel facing away from you. CHOPPER Not available with all models. To purchase, visit ninjaaccessories.com. Visit qr.ninjakitchen.com/powermixersystem or SCAN HERE Assembly Set up the blade & lid assembly: Holding the blade assembly by the top of the shaft, install it in the chopper bowl. Place ingredients in the bowl. Install the processing lid by aligning the lid with the notches in the bowl. Ensure the lid is fully installed; there will be no click. Install the power base: Attach the power base by aligning the arrow on the power base with the arrow on the processing lid, then push the power base onto the lid to lock it in place. Using the controls POWER: Press and hold continuously to process. Use short presses for short pulses and long presses for long pulses. The TURBO button is disabled when using the chopper attachment. Chopper will run on high speed by default. Dissassembly Remove the power base: Press and hold the release buttons on each side of the power base to detach. Remove the processing lid: Lift up the processing lid. Always remove the blade assembly before emptying the bowl. Chopper Basics For best results, we recommend: · Prepping ingredients into even size pieces and ensuring they sit below the top blade. · Being careful to avoid overfilling and over-processing (so you don't get uneven or watery results). · Holding the chopper bowl with one hand while processing to help ensure it stays in place. Storage Use the included storage lid to store ingredients in the bowl. WARNING: Chopping blade assembly is sharp and not locked in place. Before emptying the bowl carefully remove chopping blade assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja Safety Instructions for additional information.