Portable Triple Screen Laptop Workstation
Packing List
The following items are included in the package:
- HOST Item 1
- USB-A to USB-C *2 Item 2
- USB-C to USB-C *2 Item 3
- HDMI to TYPE-C Item 4
- BAG Item 5
- Box Item 5
- Manual Item 6
Operation Steps
Follow these steps to set up your workstation:
- Open: Extend the monitors outwards.
- Adjust the stand: Tighten or loosen the stand as needed.
TYPE-C & HDMI & USB-A Connection:
If your laptop has one full-featured Type-C port, one USB-A port, and one HDMI port, connect one monitor using the USB-C cable. Then connect the other monitor using the USB-A to USB-C cable and the HDMI to Type-C cable.
These Ports You Need to Know
Identify the different ports:
- Multi-function Button
- Multi-function Button
The workstation features three screens. Each screen has:
- Speaker
- TYPE-C ports (some for video only)
- Kickstand
How to Connect
TYPE-C Connection: If your laptop has two full-featured Type-C ports, you can connect the S2 directly to your laptop with two Type-C cables.
Notice: If the display has no signal or the signal is unstable after connection, please connect an external 5V/2A power adapter to power the laptop.
Key Definitions
- Menu/Selection/Confirmation Button: Press and hold for 2 seconds to return. Press and hold for 3 seconds to shut down.
- Toggle left "Minus" Backlight Adjustment Button
- Toggle right "Plus" Volume Adjustment Button
Tips for Use
Please refer to the pictures below to plug and unplug the data cable to avoid damage.
OK
✔️
[Correct connection]
NG
❌
[Incorrect connection]
For more detailed information, please refer to the product brochure.
Q&A
Q1: How can I tell if the USB-C port on my computer is full-featured?
A1: A USB-C port with one of the following symbols is a full-featured one. Thunderbolt 3 or Thunderbolt 4 ports are also full-featured ports. You can view the port parameters in the manual or on the Web.
Q2: Why does one monitor show "No Signal" ?
A2: There may be a connection failure or the computer port does not support video output. Please contact Teamgee for troubleshooting. They will provide you with a solution as soon as possible!
Q3: The screen does not light up after connecting?
A3: It is possible that your computer does not have enough power. Please charge the monitor with an external power supply that provides 5V/2A power. You can also contact Teamgee for further solutions.
