User Guide for Ulanzi models including: EC65 Cube Light, EC65, Light, EC65 Light, Cube Light
Shenzhen Ulanzi Technology Co.,Ltd. EC65 2BGZ6-EC65 2BGZ6EC65 ec65
65W 1. 2. 3. 4. 5. 6. 7. 8. LED 9. 10. 11. 12. 1 DC 20V 4A DC 2 PD PD 100W 20V 5A 100% C 100W 100W 20V 5A 3 100W6A C to C COB 65W 94-97 2700-6500K 6500K100%0.5 2000Lux DC PD DC:20V4APD100W20V5A Quick Start Manual Cube Light 65W Portable Bi-Color LED Video Light Lamp shade release If you need to disassemble the lampshade, please press the "lampshade release button" and select the disassembly direction according to the diagram During the use of this product, do not look directly at the COB light source, and do not touch the COB lamp beads and heat sink positions to avoid burns. Battery release button If the battery module needs to be disassembled, please press the "battery release button" and select the disassembly direction according to the diagram. Accessories such as lampshades and battery modules are not included in this package, please purchase as needed. Precautions 1. The use environment should be kept dry and ventilated; 2. No water or other liquids should drip into the product during use, so as not to cause a short circuit in the internal circuit and damage the product; 3. It is normal for the lamp body to heat up, please pay attention to the high temperature, and do not touch the light-emitting surface to avoid burning your hands; 4. When moving or installing, it should be handled with care, and do not hit other objects, so as not to cause deformation or damage to the lamp body; 5. Avoid placing near flammable or volatile solvents such as alcohol or gasoline; 6. Do not keep this product within reach of children; 7. Non-professionals, please do not disassemble casually, otherwise you will bear the consequences; 8. When the LED light is not used for a long time, please cut off the power supply, if you have purchased a battery module, please separate the battery module and the lamp body; 9. Please observe this precaution, otherwise it may cause damage to the product. 10. When using, avoid sharp objects, corrosive liquids, high-temperature substances, and try to avoid squeezing and falling from high altitudes, which may cause damage to the product. 11. It is recommended that you use the recommended specifications of the charging head and cable. If this product is damaged due to the use of accessories that are not of recommended specifications, it will not be covered by the company's warranty. 12. This equipment contains precision electronic circuits, air columns and light panels that are consumables. Failure caused by unauthorized disassembly will not be covered by the company's warranty. You can choose to pay for repairs, and if you need them, contact an authorized repairer. Power supply instructions There is no battery inside the body of this product, in order to ensure normal operation, please use the following methods for power supply: 1. Use DC adapter for power supply Please use a 20V 4A DC adapter for power supply 2. Use PD charging plug for power supply It is recommended to use a 100W (20V 5A) charging plug that supports PD fast charging protocol for power supply In order to ensure the best performance of the light board, especially when 100% brightness is required, we recommend that you use a charging head with a single output of C-mount that supports 100W and above Output Support: 100W (20V 5A) 3. a power supply line If you need to purchase your own power cable, please make sure that the cable you choose meets the following specifications: 100W, 6A C to C cable. The use of substandard cables may affect the charging efficiency of the device and may even cause damage to the device. To ensure the performance and safety of the device, use a cable that meets the above specifications. Specifications Lamp beads: two-color temperature COB lamp beads Max power: 65W CRI: 94-97 Color temperature: 2700-6500K Illuminance: 6500K, 100% brightness, 0.5m 2000Lux (bare light) Power supply port: DC port, PD port; DC:20V4A PD100W2·0V5A FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.macOS 版本14.5（版号23F79） Quartz PDFContext