Instruction Manual for Invertek Drives models including: RJ45 USB Connection Cable, USB Connection Cable, Connection Cable, Cable
User Guide USB to RJ45 Connection Cable Use A dedicated PC connection kit for all Optidrive models, allowing direct connection from the PC to the drive for use with Optitools Studio Software. The USB cable can be plugged into suitable USB type A on the PC and then into the RJ45 communications port on the drive. Compatibility This Option is compatible with the following products: CoolVert Compact P2 Eco E3 Elevator Model Code OPT-2-USB485-OBUS Technical Data Temperature Range Protection Class Weight Isolation Class Packaging 0C - 40C IP20 62 III W 127cm x D 86cm x H 45cm Isolated USB RJ45 connection adaptor. USB2.0. Compatible with windows XP, Visa, 7, 8, 8.1, 10 & 11. Supports Optitools Studio PC Software connection to the drive. 1.5 meter cable length. Driver's included in OptiTools for windows 10 & 11 Pin Function 1 2 3 0V 4 RS485- (Optibus) 5 RS485+ (Optibus) 6 7 8 12 34 5 678 Safety The RJ45 port on the drive is not an Ethernet Port. WARNING This is not an Ethernet connection. Do not connect directly to an Ethernet port. WARNING When using Modbus RTU or BACnet, ensure that the 0V signal (T3) is used to avoid comms errors and potentially damaging common mode voltages. Invertek Drives Ltd Offa's Dyke Business Park Welshpool Powys, UK SY21 8JF www.invertekdrives.com Ñ82-USB485-IN_V1.01*Ó 82-USB485-IN_V1.01 OPT-2-USB485-OBUS User Guide | Version 1.01Adobe PDF Library 17.0 Adobe InDesign 18.4 (Macintosh)