Beko SPA 9130 B Steam Iron User Manual

Welcome

Thank you for choosing this Beko product. This user manual provides important information for the safe and effective use of your steam iron. Please read it carefully and keep it for future reference.

Understanding the Symbols

• C: Important information and useful hints about usage.
• ⚠️: Warnings against dangerous situations concerning the security of life and property.
• ⚠️ Hot Surfaces: Warning for hot surfaces.
• ⚠️ Steam Burns: Risk of burning and scalding due to steam.

Product Overview

Identify the main components of your steam iron:

• 1. Water spray nozzle
• 2. Water refill lid
• 3. LED display
• 4. Water spray button
• 5. Thermostat indicator and Auto-Off light
• 6. Shock steam button
• 7. Temperature setting button
• 8. Water tank
• 9. Soleplate
• 10. Calc-clean reservoir
• 11. Steam adjustment button
• 12. Cable winding bay

Technical Specifications

*Measured at maximum temperature level, when shock steam is applied with 3-second intervals for an operating period of 30 minutes.

LED Display Symbols:

• Remarks Steam mode
• Turbo-steam mode
• Auto-Off indicator
• Maximum temperature mode
• Smart mode
• Eco mode
• Calc-clean warning/mode

Button Functions

• Water spray button (4): Use to remove tough wrinkles.
• Steam boost button (6): Provides steam boost in all modes.
• Temperature adjustment button (7): Select SMART, ECO, or MAX modes for different fabric types.
• Steam setting button (11): Allows ironing with or without steam.

Safety and Environmental Instructions

General Safety

This appliance is designed for household use. It complies with international safety standards. Ensure it is used on a stable surface and away from children under 8 years old when plugged in or cooling down. Do not use if damaged. Use only original parts. Do not attempt to dismantle. Ensure your mains supply complies with the rating plate and is secured with a minimum 16A fuse. Use only grounded outlets and do not use extension cords. Unplug before cleaning. Avoid touching hot surfaces. Do not use near flammable materials. Keep packaging materials away from children. Do not open the water filling cover during use.

WEEE and RoHS Compliance

The product complies with EU WEEE Directive (2012/19/EU) and RoHS Directive (2011/65/EU). Follow proper disposal procedures for electronic waste.

Package Information

Packaging materials are recyclable. Dispose of them at designated collection points.

Plug Wiring

The appliance is fitted with a 13A fuse. If replacing, use an ASTA approved BS1362 fuse of the same rating. Ensure the fuse cover is refitted. For alternative plugs, ensure a 13A fuse is fitted in the plug, adaptor, or main fuse box. Connect brown wire to Live (L), blue wire to Neutral (N), and green/yellow wire to Earth (E).

Operating Your Steam Iron

Intended Use

This appliance is intended for household ironing only.

Initial Use

Remove the protective film from the LED screen. Before first use, fill the water reservoir and vaporize water by frequently using the shock steam button to remove manufacturing residues. A mild odour or white sediment may appear initially but will disappear after two vaporizing cycles. Water droplets in the reservoir are normal.

Refilling the Water Reservoir

Use tap water. If your tap water is very hard, use a mixture of tap and distilled water. Do not add perfume, vinegar, starch, or other chemicals. The iron may become louder if the water level is low; refill to the MAX line.

Temperature Setting and Dry Ironing

Consider fabric care labels. The iron starts in "SMART" mode, suitable for most fabrics. For unknown fabrics, test on an inconspicuous area first. For synthetic fabrics like silk, iron on the reverse side and avoid the water spray feature to prevent stains.

Temperature Guide:

Steam Ironing

The iron produces steam only when moved (equipped with a movement sensor). Ensure sufficient water. Noise may increase if water level is low.

Turbo-Steam

Use the turbo steam function when the temperature is set to "MAX" for higher steam output on thick fabrics.

Shock Steam

Available in all modes. Wait a few seconds between presses to avoid water leakage. The thermostat indicator light (5) must be off before using shock steam. Never direct steam at people or pets.

Spraying Water

Use the water spray button (4) to easily remove creases. Ensure sufficient water in the reservoir.

Anti-Dripping System

The iron stops vaporization automatically at low temperatures to prevent dripping, allowing ironing of delicate fabrics.

Auto-Off Function

The iron automatically switches off if left idle. The Auto-Off indicator symbol will flash. It takes about 60 seconds for the soleplate to reheat after Auto-Off. Moving the iron reactivates it.

Cleaning and Care

Cleaning

Do not use harsh cleaning agents, solvents, or abrasive brushes. Never add chemicals like vinegar or starch to the water tank. Do not wash under running water or immerse in liquid. Clean the soleplate with a slightly damp cloth after it has cooled.

Auto Calc-Clean

This feature removes calc particles. Use when the "CALC-CLEAN" warning appears. Fill water to MAX, plug in, and press temperature (7) and steam (11) buttons simultaneously for 5 seconds. The process takes 3 minutes. Unplug and let it cool before emptying the tank and container. Wash the container and wipe the iron.

Self-cleaning function removes dirt inside the soleplate. Recommended every 10-15 days.

Storage

If storing for a long period, unplug, let cool completely, empty the water reservoir, and store in original packaging in a cool, dry place, out of reach of children.

Handling and Transportation

Carry the iron in its original packaging to protect it from damage. Do not place heavy items on it. Avoid dropping the appliance.

Troubleshooting

Product Guarantee

This Beko product comes with a 12-month manufacturer's guarantee covering defects in workmanship or materials. Keep your proof of purchase. The guarantee is subject to correct installation, operation, and use for normal domestic purposes. It does not cover transit damage, misuse, or unauthorized repairs.

For service, help, or advice, contact Beko Customer Service: UK/NI: 0333 207 9710, Republic of Ireland: 01 862 3411, or visit www.beko.co.uk.