Deli Paper Shredder User Manual

Model: T021, T023

Thank you for purchasing this Deli paper shredder. It is suitable for personal and office department use, offering efficient document disposal and enhanced confidentiality. Please read this manual carefully before use to ensure proper operation and prevent damage to people and property.

The Table Of Toxic And Hazardous Substances/Elements And Their Content

Part name	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr)	Polybrominated biphenyls (PBB)	Polybrominated Dimethyl Ether (PBDE)
Housings	○	○	○	○	○	○
Wastebasket	○	○	○	○	○	○
Motor	×	○	○	○	○	○
Core	○	○	○	○	○	○
Cables	×	○	○	○	○	○
Circuit board	×	○	○	○	○	○
Print	○	○	○	○	○	○
Packaging materials	○	○	○	○	○	○

○: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572. ×: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572 (Due to technical or economic reason, these toxic or hazardous substances cannot be replaced or reduced for now.).

1. Warnings And Precautions

Please place the shredder on a flat and level surface, to avoid malfunction caused by tipping over.
Warning! Do not disassemble, modify or repair the machine by yourself in any way, to avoid electric shock or accidental injury.
Warning! Do not touch the plug with wet hands, to avoid electric shock or accidental injury.
Please unplug and turn off the shredder when discarding the shredded objects, moving, or not using the equipment for a while, to avoid a fire or electric shock.
Warning! Do not splash water onto the machine to avoid a fire or electric shock.
Do not use this equipment next to a heater or air condition, in a high temperature and humidity, or dusty place, to avoid a fire or electric shock.
Do not shred tapes, copy papers, fabrics or plastic films, to avoid equipment failure.
Warning! Do not damage or process the power cord or place objects on the power cord, to avoid a fire or electric shock.
In case of smoke, odor or other abnormal conditions, please turn off the power switch immediately and stop using to avoid a fire or electric shock.
Do not use the laminator if the machine or power cord is damaged, to avoid a fire or electric shock.
Warning! Do not let children use this shredder to avoid accidental injury. (This equipment is installed with sharp blades.)
Warning! Do not touch the blades in the feed and shredded outlet slots.
Warning! Do not allow tie, necklace, sleeves, etc. to get pulling into the feed slot. (If it is accidentally entangled, press and hold the "Reverse" button to remove the object.)
Warning! Please do not allow your hair to get pulling into the feed slot. (If it is accidentally entangled, press and hold the "Reverse" button to remove the object.)
Please do not put pins, paper clips, etc. into the feed slot. (If it is accidentally entangled, press and hold the "Reverse" button to remove the object.)
Do not spray any flammable gases into the equipment to avoid a fire.

Important Information

To refer to text in an accompanying document. [i]
Only suitable for use in indoors. [indoor use only]
This appliance bears the WEEE mark (Waste of Electric and Electronic Equipment) signifying that, at the end of its life cycle, it should not be disposed of with household waste, but at a recycling centre. The recycling of waste contributes to the conservation of our environment. [recycle symbol]
Sharp edges. Do not touch. [sharp edges]
Moving parts. Keep away from children and pets, keep body part or hand away from moving parts. Always set to off or unplug when not in use. [moving parts]
Warning: The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. [class I protection]

2. Packing List

#	Name	Quantity	Remark
1	Paper Shredder	1x
2	User Manual	1x

Please check the intact of equipment and inventory all accessories. Please contact the dealer for any defect and/or missing of accessory.

3. Product Specification

	T021	T023
Product number	T021	T023
Power supply	AC230V/50Hz	AC230V/50Hz
Rated power(W)	120	120
Shred type	Cross-cut	Cross-cut
Shred size(mm)	4x25	4x25
Shred CDs or DVDs	/	/
Shredding capacity (70g, A4) (sheet)	8	8
Shredding speed (m/min)	21.6	21.6
Paper feed slot width(mm)	220	220
CD/DVD feed slot width (mm)	/	/
Wastebasket capacity(L)	12	15
Product dimensions (mm)	313 x 193 x340	318 x 197 x372
Noise(dB)	≤70	≤70
Net weight(kg)	4.1	4.3
Continuous run time (min)	25	210

*Test data from Deli lab, changes of the test environment and tools may cause deviations.

4. Maintenance

Unplug the power cord prior to maintenance.
Maintenance is limited to the cleaning of external parts only.
When cleaning the external parts, caution must be taken not to drip any water droplets into the interior of the shredder.

Note: When cleaning the outer casing of the shredder, please gently wipe with a soft cloth slightly damped with soapy water or detergent. Caution not to let the cloth enter into the feed slot, and do not use solvents such as gasoline, benzene, paint thinner and detergent.

5. Product Diagram

This diagram is for reference only, please take the actual product as standard (Shred type varies among different product number).

1. Paper Feed Throat
2. Rev/Off/Auto/Fw Switch
3. Visible window
4. Wastebasket

6. Step-by-step Instructions

Switch on the 230V power supply in accordance with the voltage specifications of your equipment.
Press the "Auto" switch button and you may start to use the shredder. The shredder will stop the shredding process automatically till you activate the next shredding operation. Upon the completion of shredding operation, please press the power switch "Off" to turn off the unit.
If you want to stop the file being shredded, press the manual eject switch "Reverse" button, the shredder will immediately reverse and eject your file.
If a "jam" condition occurs due to excessive amount of paper, press the "Reverse" button to eject the excess paper, then reduce the amount of paper and put them in the feeder again.
Shredding excessive amount of paper will result in overheated motor issue, and the shredder will stop automatically (which is the uniquely designed automatic protection function to protect the motor from overheating). After the automatic shutdown, the shredder will resume working after around 60-minutes cool down period.
The photo sensing device is located in the middle of feed slot. Place the paper to be shredded from the center of the feed slot.

7. Troubleshooting

Problem	Potential causes	Solution
The equipment is not functioning	The plug is not plugged in, no power	Push the plug into the socket thoroughly
	Voltage of the power is too low	Provide rate working voltage
	The wastebasket has not been pushed into the predetermined position	Push the wastebasket into the predetermined position
	The equipment is overheated and entered into protection mode due to prolonged use	Wait for a while till the equipment is cooled down
	Paper is too thin or too soft	Add a thicker paper or fold the paper multiple time to increase the thickness
The shredder is stalled	The wastebasket bucket is full	Clean the wastebasket
The shredder is stalled	Overload issue has not been resolved	Reduce the pages of paper and reload the paper into the feed slot
The shredder motor will not stop running	Paper jam	Press the "Reverse" button to eject the jammed paper
Operating noise is too loud	The feed slot is covered with paper dust and other foreign matter	Clean up the feed slot area
	Equipment has been put on hallow or unleveled floor	Adjust the placement of the machine

Note: If there is a malfunction condition that can't be troubleshoot through the above method, please stop using the shredder immediately, unplug the power cord and notify the local service unit for service, please don't attempt to disassemble the unit by yourself!

8. Recycling

Be sure to send used and waste electronics and packaging materials to a special recycling site to prevent uncontrolled waste disposal and facilitate material recycling.

Warranty Card

Thank you for your purchase of Deli products. For any malfunction due to product quality problems, please contact authorized local dealers or service centers with this receipt and the warranty card. Warranty terms include free repair and spare parts replacement service within one year from the date of purchase under normal operating circumstances. Customers must present the warranty card and original purchase invoice for service. No free repair service is provided for expiration of warranty, damages from improper use, unauthorized disassembly, force majeure, or wear parts. This warranty card is provided with the product and must be kept in proper condition for service; there is no replacement if lost. The document includes sections for filling out Product Information, Customer Information, Sales Information, and Maintenance Record for both the user and the dealer.

Special Disclaimer

While information of this manual has been rigorously checked and reviewed, we still cannot rule out the possibility of spelling mistakes and technical negligence and/or errors. Such negligence and/or errors will be corrected in the updated version(s) without further notice. The intellectual property of this manual belongs to our company, and no organization or individual is allowed to change the content.

Certificate

Includes fields for Inspector and Date of Manufacture.

	Deli T048 & T058 Paper Shredder Instruction Manual Official instruction manual for Deli T048 and T058 paper shredders. Covers safety, specifications, operation, maintenance, and troubleshooting for secure document destruction in office environments.
	Deli Paper Shredder User Manual (T096/T097/T098) User manual for Deli paper shredders, models T096, T097, and T098. Includes product specifications, operating instructions, maintenance, troubleshooting, and warranty information.
	Deli Paper Shredder User Manual (Models 14400, T099) Comprehensive user manual for Deli paper shredders, models 14400 and T099. Includes safety precautions, product specifications, maintenance, troubleshooting, and warranty information.
	Deli T014/T015 Paper Shredder User Manual User manual for the Deli T014 and T015 paper shredders, providing essential information on setup, operation, safety precautions, maintenance, product specifications, troubleshooting, and warranty.
	Deli E14400 Paper Shredder User Manual User manual for the Deli E14400 Paper Shredder, detailing operation, safety, maintenance, and troubleshooting for efficient document shredding in home and office environments.
	Deli E14400 Paper Shredder User Manual User manual for the Deli E14400 Paper Shredder, providing instructions on operation, maintenance, troubleshooting, and safety precautions.
	Deli Paper Shredder User Manual - Models 9927, 9929, 9939 Series Comprehensive user manual for Deli paper shredders, covering operation, safety precautions, specifications, maintenance, troubleshooting, and warranty information for models including 9927, 9929, 9939, 33186, 9939N, 9939C, 33186W, and 34529.
	Deli ET014/ET015 Paper Shredder User Manual Comprehensive user manual for the Deli ET014 and ET015 paper shredders. Learn about safety instructions, operating procedures, maintenance, troubleshooting, and technical specifications for efficient and safe document destruction.