Shelly 1PM Mini Gen4: User and Safety Guide
Product Overview
The Shelly 1PM Mini Gen4 is a compact, Matter-compatible smart switch with integrated power measurement capabilities. It allows for remote control of electrical appliances and supports both Zigbee and Bluetooth connectivity for secure communication.
The device features an embedded web interface for monitoring, control, and settings adjustment, accessible via its IP address or directly through its access point (http://192.168.33.1). It can integrate with other smart devices and automation systems. Shelly Europe Ltd. provides APIs for device integration and cloud control. For more information, visit https://shelly-api-docs.shelly.cloud.
The device comes with factory-installed firmware. Users are responsible for installing firmware updates, which are provided free of charge by Shelly Europe Ltd. to maintain security and functionality.
Safety Information
⚠ WARNING! Risk of electric shock. Installation of the Device to the power grid must be performed carefully by a qualified electrician.
⚠ WARNING! Before installing the Device, turn the circuit breakers off. Use a suitable test device to make sure there is no voltage on the wires you want to connect. When you are sure that there is no voltage, proceed to the installation.
⚠ WARNING! Before making any changes to the connections, ensure there is no voltage present at the Device terminals.
⚠ CAUTION! Connect the Device only to a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device can cause fire, property damage, and electric shock.
⚠ CAUTION! The Device may be connected to and control only electric circuits and appliances that comply with the applicable standards and safety norms.
⚠ CAUTION! Do not connect the Device to appliances that exceed the specified maximum electric load.
⚠ CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
⚠ CAUTION! The Device and the appliances connected to it, must be secured by a cable protection switch in accordance with EN60898-1 (tripping characteristic B or C, max. 16 A rated current, min. 6 kA interrupting rating, energy limiting class 3).
⚠ CAUTION! Do not use the Device if it shows any sign of damage or defect.
⚠ CAUTION! Do not attempt to repair the Device yourself.
⚠ CAUTION! The Device is intended only for indoor use.
⚠ CAUTION! Keep the Device away from dirt and moisture.
⚠ CAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the devices (mobile phones, tablets, PCs) for remote control of Shelly away from children.
Wiring Diagram Description
The device features terminals for connection:
- SW: Switch input terminal
- O: Relay output terminal
- L: Live (110-240 V~) terminal
- N: Neutral terminal
Wires used are:
- L: Live wire (110-240 V~)
- N: Neutral wire
The diagram shows a typical connection where the load is connected between terminal 'O' and the Neutral wire. The Live wire is connected to terminal 'L', and a switch or button is connected to the 'SW' terminal and the Live wire.
Installation Instructions
To connect the Device, we recommend using solid single-core wires or stranded wires with ferrules. The wires should have insulation with increased heat resistance, not less than PVC T105°C (221°F).
Do not use buttons or switches with built-in LED or neon glow lamps.
When connecting wires to the Device terminals, consider the specified conductor cross section and stripped length. Do not connect multiple wires into a single terminal.
For security reasons, after you successfully connect the Device to the local Wi-Fi network, we recommend that you disable or password-protect the Device AP (Access Point).
To enable the access point and the Bluetooth connection of the Device, press and hold the Reset/control button for 5 seconds.
To perform a factory reset of the Device, press and hold the Reset/control button for 10 seconds.
- Connect the load to the 'O' terminal of the Device and the Neutral wire, as shown on fig. 1. Connect the Live wire to an 'L' terminal of the Device.
- Connect a switch or a button to the Device 'SW' terminal and the Live wire.
Adding Zigbee Device
To switch the Device from Matter firmware (default) to Zigbee, press the Reset button 5 times. The Device stays in pairing mode for 2 minutes, and you can find it in your home automation platform through the Zigbee Hub. If you cannot find the Device, press the Reset button 3 times.
To remove the Device, go to its page and delete it from your home automation platform.
In Zigbee mode, the AP of the Device is not available by default. To enable it, you should hold the Reset button for 5 seconds.
Setting up the Device via Matter
Before you start, make sure you have:
- 2.4 GHz Wi-Fi network
- A Matter-compatible hub connected to the Internet
- A mobile device with Bluetooth enabled and a Matter-compatible app installed
- Enable the access point of the Device by pressing and holding the Reset/control button for 5 seconds.
- Scan the Matter QR code inside the box.
- Follow the instructions that appear on your screen to complete the process.
Keep the QR code for future reference. If you reset the device, you will need that code again.
Specifications
Physical
| Property | Value |
|---|---|
| Size (HxWxD) | 29x34x16 ±0.5 mm / 1.34x1.11x0.63 ±0.02 inch |
| Weight | 18 ±1 g / 0.63 ±0.04 oz |
| Screw terminals max torque | 0.4 Nm / 3.5 lbin |
| Conductor cross section | 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and bootlace ferrules) |
| Conductor stripped length | 6 to 7 mm / 0.24 to 0.28 in |
| Mounting | Wall console / In-wall box |
| Shell material | Plastic |
| Shell color | Red |
Environmental
| Property | Value |
|---|---|
| Ambient working temperature | -20°C to 40°C / -5°F to 105°F |
| Humidity | 30% to 70% RH |
| Max. altitude | 2000 m / 6562 ft |
Electrical
| Property | Value |
|---|---|
| Power supply | 110-240 V~ |
| Power consumption | < 1.2 W |
| Max. switching voltage | 240 V~ |
| Max. switching current | 8 A (240 V~) |
| Power metering | Yes |
| Overpower protection | Yes |
| Overcurrent protection | Yes |
| Overvoltage protection | Yes |
| Overtemperature Protection | Yes |
Sensors, meters
| Property | Value |
|---|---|
| Internal-temperature sensor | Yes |
Radio
Wi-Fi
| Property | Value |
|---|---|
| Protocol | 802.11 b/g/n |
| RF band | 2412 - 2472 MHz |
| Max. RF power | < 20 dBm |
| Range | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) |
Bluetooth
| Property | Value |
|---|---|
| Protocol | 4.2 |
| RF band | 2402 - 2480 MHz |
| Max. RF power | <4 dBm |
| Range | Up to 30 m / 98 ft outdoors, up to 10 m / 33 ft indoors (depending on local conditions) |
Zigbee
| Property | Value |
|---|---|
| Protocol | 802.15.4 |
| RF band | 2400 to 2483.5 MHz |
| Max. RF power | < 20 dBm |
| Range | Up to 100 m / 328 ft indoors and 300 meters / 984 ft outdoors (Depends on local conditions) |
Microcontroller unit
| Property | Value |
|---|---|
| CPU | ESP-Shelly-C68F |
| Flash | 8 MB |
Firmware capabilities
| Capability | Value |
|---|---|
| Schedules | 20 |
| Webhooks (URL actions) | 20 with 5 URLs per hook |
| Wi-Fi range extender | Yes |
| BLE Gateway | Yes |
| Scripting | Yes |
| MQTT | Yes |
| Encryption | Yes |
Shelly Cloud Inclusion
The Device can be monitored, controlled, and set up via the Shelly Cloud home automation service using the Android, iOS, or Harmony OS mobile app, or via a web browser at https://control.shelly.cloud/.
Instructions for connecting to Shelly Cloud are available in the app guide: https://shelly.link/app-guide.
Shelly Cloud integration is optional; the device functions standalone or with other platforms.
Troubleshooting
For installation or operation issues, consult the knowledge base page: https://shelly.link/1pm_mini_gen4.
Declaration of Conformity
Shelly Europe Ltd. declares that the Shelly 1PM Mini Gen4 radio equipment complies with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU.
Full EU declaration of conformity available at: https://shelly.link/1pm_mini_gen4_DoC.
Manufacturer Information
Manufacturer: Shelly Europe Ltd.
Address: 51 Cherni Vrah Blvd., bldg. 3, fl. 2-3, Sofia 1407, Bulgaria
Tel: +359 2 988 7435
E-mail: support@shelly.cloud
Official website: https://www.shelly.com
Contact information changes are published on the official website.
Shelly Control
Welcome to Shelly Technical Documentation | Shelly Technical Documentation
Shelly Europe
Shelly Europe
