DJI - Official Website
User Guide for dJI models including: L3AB2410, SS3-L3AB2410, SS3L3AB2410, Mavic 4 Pro Fly More Combo Aircraft, Mavic 4 Pro, Fly More Combo Aircraft, More Combo Aircraft, Combo Aircraft
SZ DJI TECHNOLOGY CO., LTD L3AB2410 SS3-L3AB2410 SS3L3AB2410 l3ab2410
File Info : application/pdf, 7 Pages, 456.81KB
DocumentDocumentMavic 4 Pro Quick Start Guide Aircraft 1. Gimbal and Camera 2. Forward Vision System 3. Infrared Sensing System 4. Auxiliary Bottom Light 5. Downward Vision System 6. Front LEDs 7. Propellers 8. Aircraft Status Indicator 9. Landing Gear (antennas included) 10. Upward Vision System 11. Intelligent Flight Battery 12. Battery Level LEDs 13. Power Button 14. Battery Buckles 15. Charging/Upgrading Port (USB-C) 16. microSD Card Slot Remote Controller 1. Touchscreen 2. Control Sticks 3. Wheel 4. Back Button 5. Flight Mode Switch 6. microSD Card Slot 7. USB-C Port 8. Mini HDMI Port 9. Battery Level LEDs 10. Status LED 11. RTH/Flight Pause Button 12. 5D Button 13. Antennas 14. Gimbal Dial 15. Record Button 16. Power Button 17. Focus/Shutter Button 18. Camera Settings Dial 19. Dongle Compartment 20. Customizable C2 Button 21. Customizable C1 Button Charging the Batteries Charge the remote controller and the aircraft using the provided charger via the USB-C ports. Checking the Battery Levels and Powering On/Off Press the power button once to check the battery level of the aircraft and remote controller. Press, then press and hold on the power button to turn on/off the aircraft and remote controller. Preparing the Aircraft 1. Unfold the front arms and the propellers. 2. Unfold the rear arms and the propellers. Preparing the Remote Controller 1. Unfold the touchscreen. 2. Unfold the antennas. Preparing for Takeoff 1. Power on the remote controller 2. Power on the aircraft 3. Launch DJI Fly App Flight · Remote Controller Operation Specifications · Aircraft Takeoff Weight Max Flight Time Operating Temperature Operating Frequency Transmitter Power (EIRP) 1040 g 50 minutes 14° to 104°F (-10° to 40°C) 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.1 GHz: <21 dBm (FCC), <23 dBm (CE) 5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <30 dBm (SRRC) · Intelligent Flight Battery Capacity 6654 mAh Battery Type Li-ion 4S Energy 95.28 Wh Charging Temperature 41° to 113°F (5° to 45°C) · Remote Controller (Model: RC520) Weight Approx. 720 g Battery 18650 Li-ion (6100 mAh @ 7.2 V) O4 Operation Frequency 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz Transmission Power (EIRP) 2.4GHz: 33 dBm (FCC), 20 dBm (CE/SRRC/MIC) 5.1GHz:<21 dBm (FCC), <23 dBm (CE) 5.8GHz: 33 dBm (FCC), 14 dBm (CE), 30 dBm (SRRC) Wi-Fi Protocol 802.11b/a/g/n/ac/ax 2×2 MIMO Operation Frequency 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz Transmission Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.1 GHz: <23 dBm (FCC/CE/SRRC/MIC) Bluetooth Protocol Operation Frequency Transmission Power (EIRP) 5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE) Bluetooth 5.2 2.400-2.4835 GHz <10 dBm FCC Compliance Notice Supplier's Declaration of Conformity Product name: DJI Mavic 4 Pro Model Number: L3A,L3B Responsible Party: DJI Research LLC Responsible Party Address: 17301 Edwards Road, Cerritos, CA 90703 Website: www.dji.com We, DJI Research LLC, being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED Compliance Notice CAN ICES-003 (B) / NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1)L'appareil ne doit pas produire de brouillage; (2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This aircraft complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux radiations CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.