Product Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Instruction Manual for MEAN WELL models including: PS-05 Series, PS-05 Series 5W Single Output Switching Power Supply, 5W Single Output Switching Power Supply, Single Output Switching Power Supply, Switching Power Supply, Power Supply
Блок живлення що вбудовується відкритий 5W 12V PS-05-12 MeanWell за ціною від 255.00 грн - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 2 Pages, 112.47KB
DocumentDocument5W Single Output Switching Power Supply PS-05 series User's Manual Features : Universal AC input / Full range Low leakage current <0.5mA Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection 100% full load burn-in test Fix switching frequency at 67KHz Low cost GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx SPECIFICATION High reliability 2 years warranty Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 BS EN/EN62368-1 TPTC004 IEC62368-1 MODEL PS-05-5 PS-05-12 PS-05-15 PS-05-24 PS-05-48 DC VOLTAGE 5V 12V 15V 24V 48V RATED CURRENT 1A 0.45A 0.35A 0.22A 0.11A CURRENT RANGE 0 ~ 1.2A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.25A 0 ~ 0.125A RATED POWER 5W 5.4W 5.25W 5.28W 5.28W OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±1.0% LOAD REGULATION ±1.0% 120mVp-p ±2.0% ±1.0% ±1.0% 120mVp-p ±2.0% ±1.0% ±1.0% 200mVp-p ±2.0% ±0.5% ±0.5% 200mVp-p ±1.0% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 20ms HOLD UP TIME(Typ.) 100ms at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY(Typ.) 70% 75% 75% 76% 76% AC CURRENT (Typ.) 0.15A/115VAC 0.07A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/230VAC LEAKAGE CURRENT <0.5mA / 240VAC OVERLOAD PROTECTION OVER VOLTAGE Above 105% rated output power Protection type : Hiccup mode, recovery automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.2 ~ 20.2V 27.6 ~ 32.4V 55.2 ~ 64.8V OVER TEMPERATURE Hiccup mode, recovery automatically after fault condition is removed WORKING TEMP. -10 ~ +60 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT ±0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS TUV BS EN/EN62368-1,EAC TP TC 004 approved, IEC62368-1 CB approved by TUV SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, EAC TP TC 020 Compliance to BS EN/EN61000-3-2,-3 OTHERS NOTE EMS IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020 MTBF 6873.2K hrs min. Telcordia SR-332 (Bellcore) ; 1271.1K hrs min. MIL-HDBK-217F (25) DIMENSION 75*40*20mm (L*W*H) PACKING 0.05Kg; 120pcs/6.25Kg/0.56CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 5. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PS-05-SPEC 2024-02-23 Downloaded from Arrow.com. 5W Single Output Switching Power Supply Mechanical Specification (Unit: mm , tolerance ± 1mm) 75 67 To chassis Grounding PS-05 series 32 40 1 2 3 CN2 CN1 1 2 4- 3.5 20 AC Input Connector (CN2) : Molex 5285-03 or equivalent Pin No. Assignment Mating Housing Terminal 1 FG Molex 5058 Molex 2478 2 AC/N or equivalent or equivalent 3 AC/L Block Diagram DC Output Connector (CN1) : Molex 5273-02 or equivalent Pin No. Assignment Mating Housing Terminal 1 +V Molex 5195 Molex 5194 2 -V or equivalent or equivalent : Grounding Required CN2:Pin 1 is safety ground fosc : 67KHz I/P EMI FILTER RECTIFIERS & FILTER POWER SWITCH- ING RECTIFIERS & FILTER +V -V PWM CONTROL FG DETECTION CIRCUIT Derating Curve Static Characteristics 100 80 60 40 20 -10 0 10 20 30 40 50 60 AMBIENT TEMPERATURE () (HORIZONTAL) 100 90 80 70 60 50 40 85 90 95 100 105 264 INPUT VOLTAGE (V) 60Hz File Name:PS-05-SPEC 2024-02-23 LOAD (%) LOAD (%) Downloaded from Arrow.com.