Material Safety Data Sheet
Report No.: BCTC2412740613B
Section 1: Chemical Product and Company Identification
Product Name: 25000mAh 200W Fast Charging Power Bank
Model/Type Reference: PB722 (Internal cell model: N21700CG-50)
Trademark: UGREEN
Ratings: 18V, 5000mAh, 90Wh (Internal cell ratings: 3.6V, 5000mAh, 18Wh; Internal cell structure: 5 cells in series)
Weight: About 593.2g
Manufacturer: Ugreen Group Limited
Manufacturer Address: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
Factory: Shenzhen Firstar Battery Co., Limited
Factory Address: The 01st/02nd/ 03rd/ 04th floors of the Second building, the 201 floor of the Six building, and the 01st /02nd floors of the Third building and the Fuzhong Industrial Park, Huaide Community, Fuyong Street, Bao'an District, Shenzhen City, Guangdong Province, P.R. China
Emergency Telephone: 0755-28066530
Section 2: Composition Information
| Chemical Composition | CAS No. | Weight (%) | Trade Secret |
|---|---|---|---|
| Lithium nickel cobalt aluminate | 177997-13-6 | 37-38.5 | * |
| Graphite | 7782-42-5 | 16-17.5 | * |
| SiO | 10097-28-6 | 1.2-1.3 | * |
| Copper foil | 7440-50-8 | 7-7.2 | * |
| Aluminum foil | 7429-90-5 | 3.7-3.73 | * |
| Electrolyte (C3H4O3) | 96-49-1 | 1-1.1 | * |
| Electrolyte (C4H8O3) | 623-53-0 | 1-1.1 | * |
| C3H6O3 | 616-38-6 | 6.2-6.5 | * |
| F6LiP | 21324-40-3 | 1.1-1.3 | * |
| Separator | / | 2.2 | * |
* The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 3: Hazards Identification
Emergency overview: Not applicable.
GHS Classification: Not a dangerous substance according to GHS.
Label elements: Not applicable.
Hazard pictogram(s): No available.
Signal word: No available.
Hazard statement(s): No available.
Precautionary statement(s): No available.
Environmental hazards: No relevant information.
Important symptoms: See section 11 for more information.
Section 4: First Aid Measures
Eye contact: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin contact: Remove contaminated clothes and rinse skin with plenty of water or shower for 15 minutes. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. Use oxygen if available. Call a physician.
Ingestion: Give at least 2 glasses of milk or water. Induce vomiting unless patient is unconscious. Call a physician.
Section 5: Fire Fighting Measures
Flash Point: N/A
Auto-Ignition Temperature: N/A
Extinguishing Media: Water, CO2
Special Fire-Fighting Procedures: Self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Cell may vent when subjected to excessive heat-exposing battery contents.
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, lithium oxide fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: If the battery is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to clear out hazardous gases. The preferred response is to leave the area and allow the vapors to dissipate. Avoid skin and eyes contact or inhalation of vapors. Remove spilled liquid with absorbent and incinerated. If leakage of the battery happens, liquid could be absorbed by using sand, earth or other inert substance and contaminated area should be ventilated meantime.
Environment precautions: Do not allow product to reach sewage system or any water source. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up: If battery casing is dismantled, small amounts of electrolyte may leak. Collect all released material in a plastic lined container. Dispose off according to the local law and rules, Avoid leached substances to get into the earth, canalization or waters.
Section 7: Handling and Storage
Handling: The battery should not be opened, destroyed or incinerate, since they may leak or rupture and release to the environment the ingredients that they contain in the hermetically sealed container. Do not short circuit terminals, or over charge the battery, forced over-discharge, throw to fire. Do not crush or puncture the battery, or immerse in liquids.
Storage: Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is subject to little temperature change. Storage at high temperatures should be avoided. Do not place the battery near heating equipment, nor expose to direct sunlight for long periods. The battery may explode or cause burns, if disassembled, crushed or exposed to fire or high temperatures. Do not short or install with incorrect polarity.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use local exhaust ventilation or other engineering controls to control sources of dust, mist, fumes and vapor.
Personal Protective Equipment:
- Respiratory Protection: Not necessary under normal conditions.
- Skin and body Protection: Not necessary under normal conditions. Wear suitable protective clothing and gloves if handling an open or leaking battery.
- Hand protection: Wear suitable gloves if handling an open or leaking battery.
- Eye Protection: Not necessary under normal conditions. Wear safety glasses if handling an open or leaking battery.
Hygiene Measures: Have a safety shower and eye wash fountain readily available in the immediate work area. Do not eat, drink, or smoke in work area. Maintain good housekeeping.
Section 9: Physical and Chemical Properties
Form: Solid
Color: Black
Odour: No available
pH: No available
Melting point/freezing point: No available
Boiling Point and Boiling range: No available
Flash Point: No available
Upper/lower flammability or explosive limits: No available
Vapor Pressure: No available
Vapor Density: No available
Relative density: No available
Solubility in Water: No available
Auto-ignition temperature: No available
Decomposition temperature: No available
Evaporation rate: No available
Flammability (soil, gas): No available
Viscosity: No available
Section 10: Stability and reactivity
Stability: The product is stable under conditions described Section 7.
Conditions to Avoid: Heat above 70°C or incinerate. Deform, Mutilate, Crush, Disassemble, Overcharge, Short circuit, Expose over a long period to humid conditions.
Incompatible Materials: Oxidizing agents, acid, base.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, lithium oxide fumes.
Possibility of Hazardous Reaction: Not Available.
Section 11: Toxicological Information
Irritation: Risk of irritation occurs only if the cell is mechanically, thermally or electrically abused to the point of compromising the enclosure. If this occurs, irritation to the skin, eyes and respiratory tract may occur.
Sensitization: Not Available.
Neurological Effects: Not Available.
Teratogenicity: Not Available.
Reproductive Toxicity: Not Available.
Mutagenicity (Genetic Effects): Not Available.
Toxicologically Synergistic Materials: Not Available.
Section 12: Ecological Information
Ecological Toxicity: Not Available.
Mobility in soil: Not Available.
Persistence and Degradability: Not Available.
Bioaccumulation potential: Not Available.
Other Adverse Effects: Not Available.
Section 13: Disposal Considerations
Product disposal recommendation: Observe local, state and federal laws and regulations.
Packaging disposal recommendation: Disposal must be made according to official regulations.
Section 14: Transport Information
UN Number: UN 3480
UN Proper shipping name: Lithium ion Batteries
Packing Instructions: 9
Air: IATA DGR Manual 66th
Sea: IMDG CODE (Amdt. 42-24) SP188
Road: ADR - Agreement concerning the International Carriage of Dangerous Goods by Road
Railway: RID - Regulations concerning the International Carriage of Dangerous Goods by Rail
Note: Battery are tested and has passed in accordance with UN38.3. Separate Lithium-ion batteries when shipping to prevent short-circuiting. They should be packed in strong packaging for support during transport, ensure that the goods will not falling, dropping, and breakage, Prevent collapse of cargo piles and wet by rain.
Section 15: Regulatory Information
This section lists various regulations including: Dangerous Goods Regulations, Recommendation on the Transport of Dangerous Goods Model Regulations, International Maritime Dangerous Goods, Technical Instructions for the Safe Transport of Dangerous Goods, Occupational Safety and Health Act (OSHA), Toxic Substance Control Act (TSCA), Consumer Product Safety Act (CPSA), Federal Environmental Pollution Control Act (FEPCA), The Oil Pollution Act (OPA), Superfund Amendments and Reauthorization Act Title III (SARA), Resource Conservation and Recovery Act (RCRA), Safety Drinking Water Act (CWA), California Proposition 65, Code of Federal Regulations (CFR).
Section 16: Other Information
The information in this MSDS has been compiled based on the information in the relevant materials currently in our possession and is intended only to describe the health, safety and environmental requirements of this product so that all interested parties can better understand and trust this product. This information is provided to you only for your consideration, research and confirmation. Some of the harm prevention measures described are not unique. Therefore, this MSDS is not a guarantee that this product will be used for any particular purpose. It is the responsibility of the user concerned to complete the safety and other aspects of the product in advance to determine whether it meets your purpose of use.
Statement
- The equipment lists are traceable to the national reference standards.
- The test report can not be partially copied unless prior written approval is issued from our lab.
- The test report is invalid without stamp of laboratory.
- The test report is invalid without signature of person(s) testing and authorizing.
- The test process and test result is only related to the Unit Under Test.
- Sample information is provided by the customer and the laboratory is not responsible for its authenticity.
- Reports without CMA mark are only used for scientific research, teaching, enterprise product development and internal quality control purposes.
- The quality system of our laboratory is in accordance with ISO/IEC17025 standard.
- If there is any objection to report, the client should inform issuing laboratory within 15 days from the date of receiving test report.
Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China
TEL: 400-788-9558
FAX: 0755-33229357
Website: http://www.chnbctc.com
Consultation E-mail: bctc@bctc-lab.com.cn
Complaint/Advice E-mail: advice@bctc-lab.com.cn
