Instruction Manual for TREND models including: TP20006 Antique Chandelier, TP20006, TP20006 Chandelier, Antique Chandelier, Chandelier

No Slide Title

moses

INSTALLATION SHEET

Solea 40 Inch 12 Light Chandelier | Capitol Lighting

Install Sheet

Trend Lighting TP20006ATB Solea 12 Light 40 inch Antique Brass Chandelier Ceiling Light

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 167.29KB

Document Document

TP20006 INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

13

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

20

missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION

21

1. Connect the stems (14)(15)(16)(17)(18) one by one, then attach them into the fixture frame (19). Thread the stem into the swivel (13).
2.Thread two machine screws (8)to the mounting bar (9) and secure with the hex nut (7). 3. Secure the mounting bar (9) with mounting screw (10) to the outlet box (1). 4. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections. --Ribbed /white wire (w/o marking) from light to White wire (2) from power source. --Smooth/black wire (w/o marking) from light to Black wire (3) from power source. --Loop the ground wire (4) to mounting bar (9) with a ground screw (6). 5. Attach the fixture canopy (11) to the outlet box (1), secure with the ball nut (12). 6. Install bulbs: (bulbs not included)
(Do not exceed the maximum capacity that recommended on the sockets). 7. Place the Glass (22) over the Spring Clip(21) and attach with Socket Cup (20).

INSTALLATION IS NOW COMPLETED

1. OUTLET BOX 2. WHITE WIRE 3. BLACK WIRE 4. GROUND WIRE 5. WIRE CONNECTOR 6. GROUND SCREW 7. HEX NUT 8. MACHINE SCREW 9. MOUNTING BAR 10. MOUNTING SCREW 11. CANOPY 12 BALL NUT 13. SWIVEL 14. STEM (L12") 15. STEM (L12") 16. STEM (L12") 17 .STEM (L6") 18. STEM (L3") 19. FIXTURE FRAME 20. SOCKET CUP 21. SPRING CLIP 22. GLASS