Enbrighten One-Touch Sync Remote Control

Welcome & Product Information

Thank you for purchasing the Enbrighten One-Touch Sync Remote Control with Wall-Mount Cradle. This manual provides essential information for setup and use.

For detailed instructions, videos, and product registration, visit www.enbrightenme.com.

Installation Guide

Tools Needed: Drill, drill bits (3/32in. for studs, 1/4in. for drywall), Phillips-head screwdriver, safety glasses.

Remote Mounting Options: Instructions are provided for mounting the remote with or without a wallplate. This involves marking holes, drilling, and securing the mount with screws.

Installing Battery: The remote uses a CR2032 battery. Instructions detail how to remove the remote from its mount, open the battery drawer, insert the new battery (positive side up), and close the drawer.

Operation

Pairing/Unpairing: Link the remote to one or more light fixtures. Ensure fixtures are unplugged, then plug them in and press the remote's ON/OFF button within 10 seconds. A single blink indicates pairing; a double blink indicates unpairing.

Controls:

• ON/OFF: Press to turn lights on or off.
• White Select: Cycle through color temperature options.
• Bright Select +/-: Adjust brightness levels.

Remote Specifications: Functional range up to 60ft. Uses CR2032 battery.

Troubleshooting

Indicator light not red: Check battery installation or replace the battery.

Light not turning on: Ensure the light fixture is manually turned on and working. The receiver may need re-pairing.

Important Safety Information & Warranty

Warnings: Includes important safety precautions regarding battery handling (do not mix old/new, different types; keep away from children; ingestion hazard), and general product use (do not use in wet locations).

Warranty: Features a limited-lifetime replacement warranty. Contact Jasco Consumer Care or visit the website for details.

FCC Statement: Compliance information and measures to correct interference are provided.