Snom Service Hub - Snom Service Hub - Snom Confluence
User Manual for snom models including: D81x Expansion Module, D81x, Expansion Module, Module
Manuals - Snom Service Hub - Snom Confluence
7 дек. 2024 г. — When this document is made available on Snom's web page, Snom Technology GmbH gives its permission to download and print copies of its content for the ...
File Info : application/pdf, 27 Pages, 3.92MB
DocumentDocumentUser Manual D8C Expansion Module when used with a Snom D81x phone v1.02 TABLE OF CONTENTS Copyright, Trademarks, Legal Disclaimers ........................................................................3 Important information ..........................................................................................................4 Safety instructions ..........................................................................................................4 Standards conformance ..................................................................................................4 Important additional information USA ............................................................................... 5 Important additional information Industry Canada ......................................................... 5 Product.specifications.......................................................................................................5 Disposal of the device .....................................................................................................6 Cleaning ............................................................................................................................6 Setting up the expansion module ....................................................................................7 Delivery content ...................................................................................................................... 7 Attaching the footstand ......................................................................................................... 7 Connecting the Snom D8C to a Snom phone ..................................................................... 8 Detaching the D8C .................................................................................................................. 9 Connecting a second D8C ...................................................................................................... 9 Connecting a third D8C ........................................................................................................10 Connecting a wireless headset ..........................................................................................11 Getting to know your D8C .............................................................................................. 12 Display layout ........................................................................................................................12 SmartLabels ..........................................................................................................................13 Function key LEDs ................................................................................................................13 Display appearance settings ...............................................................................................14 Configuring the function keys ....................................................................................... 17 Configuration on the phone ................................................................................................17 Font size and text alignment .........................................................................................17 Function settings .............................................................................................................17 Configuration on the web interface ...................................................................................18 Font size and text alignment .........................................................................................18 Function settings .............................................................................................................18 XML provisioning of settings ..............................................................................................19 Function key numbering system .................................................................................. 22 Firmware update ........................................................................................................... 24 Manual update via the phone's web interface ................................................................24 Update via provisioning .......................................................................................................24 2 D8C User Manual for Using the D8C with a D81x Phone Copyright, Trademarks, Disclaimers Copyright, Trademarks, Legal Disclaimers © 2024 Snom Technology GmbH All Rights Reserved. Snom, the names of Snom products, and Snom logos are trademarks owned by Snom Technology GmbH. All other product names and names of enterprises are the property of their respective owners. Product specifications are subject to change without notice. Snom Technology GmbH reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact. Texts, images, and illustrations and their arrangement in this document are subject to the protection of copyrights and other legal rights worldwide. Their use, reproduction, and transmittal to third parties without express written permission may result in legal proceedings in the criminal courts as well as civil courts. When this document is made available on Snom's web page, Snom Technology GmbH gives its permission to download and print copies of its content for the intended purpose of using it as a manual. No parts of this document may be altered, modified or used for commercial purposes without the express written consent of Snom Technology GmbH. Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. Snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of Snom or where liability arises due to binding legal provisions. 3 D8C User Manual for Using the D8C with a D81x Phone Safety, Disposal, Cleaning of Product Important information Please read the instructions on safety and disposal and on how to set up and use the device before using it and also give them to other users to read or inform those users of their contents. Save this manual and do not give the device to third parties without it. The nameplate is located at the bottom or rear of the product. Safety instructions Follow the instructions in this manual and other applicable documentation of the device. · For use with Snom D8xx phones. Do not connect the device to a PC or to other phones! · Mount the device only at heights not exceeding 2m. · If the device is not supplied with power via the USB connection, use only a power adapter expressly recommended by Snom Technology. Other power supplies may damage or destroy the device, affect its behavior, or induce noise. · Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them. · This device is for indoor use only! NOT FOR OUTDOOR USE! · Do not install the device in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device. · Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes. · Do not use the device during thunderstorms. Lightning striking the power grid may cause electric shocks. · To deactivate the device, separate it from its power source. · SELV (Safety Extra Low Voltage) compliance. Safety status of Input/Output connections comply with SELV requirements. Standards conformance This device complies with the essential health, safety, and environmental requirements of all relevant European directives and UK legislation. This device meets the relevant US and Canadian health, safety, and environmental standards. The declaration of conformity can be donloaded at https://www.snom.com/conformity. Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may 4 D8C User Manual for Using the D8C with a D81x Phone Safety, Disposal, Cleaning of Product also result in the loss of CE, FCC, and IC conformity. In case of malfunction contact authorized service personnel, your seller, or Snom. Important additional information USA FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user's expense. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Important additional information Industry Canada This Class A digital apparatus complies with Canadian requirements: CAN ICES-3 (A)/NMB-3(A). This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Cet appareil numérique de la classe A est conforme à la norme NMB-003(A) du Canada. Le présent produit est conforme aux spécifications techniques applicables d`Innovation, Sciences et Développement économique Canada. Product.specifications.. · Safety: IEC 62368-1 · Connectors: 1 USB plug, type A, USB 2.0 1 USB port, type A, USB 2.0 1 x 5V DC jack · Power: Via the USB connection to the phone. A power adapter (available separately) is needed for the second module which also supplies power to the third module via USB cable. The first and third module may also need a power adapter if a USB device requiring a lot of power, such as a speakerphone or conferencing device, is connected to its USB port. 5 D8C User Manual for Using the D8C with a D81x Phone Safety, Disposal, Cleaning of Product Mass Power, model NBS12E050200UV, Snom PN 00004570 - EU/UK: shipped with EU and UK clips - U.S./Canada: shipped with U.S. clip Note for D89x phones: The Snom 15W power supply, Snom PN 00004715, has to be purchased separately and connected to the DC power jack of the D89x phone when one or more D8Cs are connected to it. Disposal of the device This device is subject to European Directive 2012/19/EU and may not be disposed of with general household garbage. If you do not know where you may dispose of the device at the end of its lifespan, contact your municipality, your local waste management provider, or your seller. For countries outside the European Union: Disposal of electrical and electronic products in countries outside the European Union should be done in line with local regulations. Please contact local authorities for further information. Cleaning To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or internal electronics of the device. 6 D8C User Manual for Using the D8C with a D81x Phone Setting up the expansion module Setting up the expansion module Delivery content GNU General Public License Quick Installation Guide D8C Base unit with type A plug Footstand 2 screws Quick Installation Guide, GNU General Public License Attaching the footstand 1. Place the footstand below the slideguides on the back of the device (Fig. 1). 2. Push the footstand upwards onto the slideguides (Fig. 2) until it locks in place (Fig. 3). Fig. 1 Fig. 2 Fig. 3 7 D8C User Manual for Using the D8C with a D81x Phone Setting up the expansion module Connecting the Snom D8C to a Snom phone You can connect up to three Snom D8Cs to one of the supported Snom phones. Normally, the first expansion module is supplied with power by the phone via the USB connection. The second module is supplied with power by one of the separately available power adapters. The third expansion module is supplied with power by the second module via the third module's USB plug. Note: In some cases, e.g. if you connect a device requiring a lot of power, such as a speakerphone or conferencing device, to the USB port of the D8C, you may also need to attach a power adapter to the third and the first module in the daisy-chain. 1. Place a soft cloth on the desktop so that the display does not get scratched or otherwise damaged if you lay the device down. 2. Attach the respective footstand to the D8C expansion module and to the phone. 3. Remove the rubber cover from the phone's USB port and the plastic cover around the USB port (Fig. 1). Fig. 1 4. Connect the expansion module to the phone, as shown in Fig. 2. Insert the two prongs on the connector plate of the D8C into the square holes on the phone and the USB plug into the phone's USB port (Fig. 2). Fig. 2 5. Secure the connector plate to the phone with the two screws that came with the product (Fig. 3). (Phillips screwdriver not included in the delivery.) 8 D8C User Manual for Using the D8C with a D81x Phone Setting up the expansion module Fig.3 After the module has been connected to the phone, its LEDs will light up briefly, then turn off, indicating that the function keys are now ready for use. Detaching the D8C 1. Remove the two screws. 2. Press to release the connection and slowly pull the USB plug from the USB port. Connecting a second D8C 1. Up to three expansion modules can be daisy-chained to one phone. Daisy-chain the modules first. Do not use a USB hub 2. Remove the rubber cover and the plastic cover from the USB port of the first expansion module and plug in the USB plug of the second module. Use the screws included in the delivery to securely attach the second module to the first one (Fig. 1). 3. Attach a power adapter (available separately) to the module and to a wall outlet before connecting the daisy-chain to the phone (Fig. 1). 9 D8C User Manual for Using the D8C with a D81x Phone Setting up the expansion module Fig. 1 4. The LEDs on the expansion modules will light up briefly, then turn off, indicating that the function keys are now ready for use. 5. Important note: Attach a power adapter (available separately) to the second module and to a wall outlet before connecting the daisy-chain to the phone or the second / second and third module to the D8C already connected to the phone (Fig. 10). 6. The LEDs on the expansion module will light up briefly, then turn off, indicating that the function keys are now ready for use. Connecting a third D8C 1. Remove the rubber cover and the plastic cover from the USB port of the second expansion module and plug in the USB plug of the third module. Use the screws included in the delivery to securely attach the third module to the second one (Fig. 2). Fig. 2 2. The LEDs on the expansion module will light up briefly, then turn off, indicating that the function keys are now ready for use. Note: If you connect a device requiring a lot of power, such as a speakerphone or conferencing device, to the third module, it may also need its own power adapter. 10 D8C User Manual for Using the D8C with a D81x Phone Setting up the expansion module Connecting a wireless headset On phones with a single USB port, the USB port on the expansion module can be used to connect a wireless headset via its USB adapter. If two or three expansion modules are daisy-chained, insert the USB adapter of the wireless headset into the USB port on the last module in the chain, If the Snom phone has two USB ports, the USB adapter of the wireless headset can be inserted into the USB port on the expansion module or into the free USB port on the phone. 11 D8C User Manual for Using the D8C with a D81x Phone Getting to know your D8C Getting to know your D8C The function keys on the expansion module(s) are configured and work like function keys/SmartLabel keys with LEDs on the phone itself. The settings are stored on the phone and will remain stored there when the expansion module is disconnected; if the expansion module is replaced by another module, the settings will by used by that module. For more information on the available functions and on how to program and use the keys, please refer to the phone's manual, chapter "Programming the Function Keys". You can download the manual at https://service.snom.com -> Desk Phones. Display layout LED key Fkey label Fkey separator Page keys Fig. 1 Fig. 2 The module has 20 keys with LEDs (60 function keys on three "pages" with 20 function keys each) and three number keys with LEDs to select the function key pages. A field on the display screen is allocated to each key. The labels for the left row of keys are left-aligned, the labels for the right row are right-aligned (Fig. 2). To use a function key, the page it is own must be onscreen. The glowing green LED on a page key indicates which page is onscreen. The blinking red LED on the page key of a page that is not onscreen indicates that there is a ringing call for an extension on that page. 12 D8C User Manual for Using the D8C with a D81x Phone Getting to know your D8C SmartLabels In the default setting, icon and name of the function type are shown in the label area (Fig. 1 and 2, example 1). When no text has been entered in the Label field and the Number field is empty, the label area on the display shows the function type (example 1). When a text is entered in the Label field, it is displayed instead of the function type (example 2, 4, and 5). When a value is entered in the Number field and the Label field is empty, the value is added as a second line to the function type in the top line (example 3). If you want two lines of character strings to be displayed, for example a name and a phone number for an extension setting, enter them in the Label field with the <br> tag between them (example 5). Fig. 1 1 Note: The label is a convenience for the user. It has no 2 effect on the functioning of the key. Examples 1 and 2 3 are not valid extension settings because no Number value has been set. 4 5 Fig. 2 Depending on the function mapped onto the key, its allocated display area will show the context information when the key event occurs or when the key is pressed; it will revert to the idle content when the key event has ended or when the key is pressed again. Fig. 3 Extension idle Extension ringing Extension busy Function key LEDs Depending on the function mapped onto the key, the LEDs on the key will light up when the key event occurs or when the key is pressed; they will go out when the key event has ended or when the key is pressed again. 13 D8C User Manual for Using the D8C with a D81x Phone Getting to know your D8C Display appearance settings The phone comes with four standard background themes (UI color themes) that are selected on the phone and on the phone's web interface (Fig. 1 to 5). The phone and all connected D8C's display the same theme. For the D81x series, the default is the "contrast" theme at Fig. 5. The color of label separators, text, and symbols is adjusted automatically for best readability on the background. Per provisioning only, you can also specify the URL to a custom background image to be used instead. For custom backgrounds with a light background or a mixed background you may also need to set the industrial UI color theme to improve the readability of the text. Fig. 1Light Fig 2Dark Fig. 3Colorful Fig. 4Industrial Fig. 5Contrast The intensity of the backlight can be adjusted separately for periods of activity and inactivity. When the device has been inactive for a specified number of seconds, it will automatically switch the backlight intensity to idle mode. Settings on the phone UI color theme 1. Open the Settings menu of the phone that the module is connected to. 2. Select Preferences and press . 3. Select Display and press . 4. Select Primary display and press . 5. Select Themes and press . 6. Select a theme and press to save and return to the Primary display menu. 14 D8C User Manual for Using the D8C with a D81x Phone Getting to know your D8C Backlight 1. Open the Settings menu of the phone that the module is connected to. 2. Select Preferences and press . 3. Select Display and press . 4. Select Expansion Modules and press 5. Select Backlight on activity or Backlight when idle and press . 6. Press the right or left arrow on the navigation key or the function key underneath or function key line to decrease or increase the backlight's intensity. 7. Press to save and return to the Expansion Modules menu. Note: The timer for returning the backlight to idle mode is set on the web interface. in the Settings on the web interface UI color theme 1. Open the web interface of the phone. 2. Click Preferences in the menu on the left side of the window. 3. Click the Appearance tab. 4. Scroll down to UI Color Theme and select a theme from the drop-down menu. 5. Click Apply and Save. Custom image 1. Open the web interface of the phone. 2. Click Preferences in the menu on the left side of the window. 3. Click the Appearance tab. 4. Scroll down to Expansion Module Interface Elements and enter the URL to a custom image. Image size must be 480 by 1280 pixels, and the file size should be below 2MB. If the image does not conform to these specifications, the current UI color theme will be instead used instead. 15 D8C User Manual for Using the D8C with a D81x Phone Getting to know your D8C 5. Click Apply and Save. Backlight 1. Open the web interface of the phone. 2. Click Preferences in the menu on the left side of the window. 3. Click the Display tab. 4. In the USB Expansion Module section, enter a value from 0 to 15 in the text fields of backlight on activity and backlight when idle., The defaults are 15 (highest intensity) for backlight on activity and 8 for backlight when idle. Enter 0 to turn the backlight off. 5. Enter a time period in seconds in the text field of Dim after (s). Valid values are integers from 1 to 2147483647. The default is 20 seconds. 6. Click Apply and Save. 16 D8C User Manual for Using the D8C with a D81x Phone Configuring the function keys Configuring the function keys The function keys on the expansion module are configured and work like the SmartLabel keys with LEDs on the phone. The settings are stored on the connected phone and remain stored there when the expansion module is disconnected. They are not shown in the phone's settings when no expansion module is connected. If the expansion module is replaced by another module, the settings will by used by that module. The keys on the D8C are freely programmable function keys. See the phone's manual, chapter Configuring the function keys, for the description of the settings and how to configure them. You can download the manual at https://service.snom.com +. Configuration.on.the.phone.. Font size and text alignment The font size of the upper (MainText) and lower (SubText) text lines can be adjusted separately. Main Text Sub Text 1. Open the Settings menu of the phone that the module is connected to. 2. Open the Preferences menu. 3. Open the Display menu. 4. Open the Expansion Modules menu. 5. Open Appearance. 6. Select the UXMC expansion module. 7. Select the font size for the top line (Maintext size) and the bottom line (Subtext size) and press . The defaults are XL and S, respectively. 8. Open Text alignment. 9. Select the text alignment and press . The default is left-aligned. 10. Press for 3 seconds to return to the idle screen. Function settings 1. Open the Settings menu of the phone that the module is connected to. 2. Open the Preferences menu. 3. Open the Function keys menu. 4. Select Expansion keys. 5. Open Font size. 6. Select Expansion Keys # Page 1, 2, or 3, respectively, by scrolling to the respective page and pressing . 17 D8C User Manual for Using the D8C with a D81x Phone Configuring the function keys 7. Select a key and press to open the Key # Function menu. The selected key flashes yellow if the SmartLabel key page with the key to be configured is on-screen. Press the respective page button (1, 2, or 3) on the D8C to display the page. 8. The default for Context is Active, i.e., all configured identities whose status is "active". a. If you want to restrict the functionality to a configured identity, select Context and press . b. Select the identity from the menu and press selected functionality. . The following prompts depend on the 9. Select Type and press . Use / to scroll to a functionality on the list and press . The information you will then be prompted to enter depends on the selected functionality. 10. In our example, the functionality is Extension. Press to select and return to the Key # function menu where Number has been added to the menu below "Type". 11. Select Number and press . 12. Enter the extension number and press . 13. The Label is optional. See "SmartLabels" on page 13 for more information. Enter a name or other descriptive text and press or press without entering data to save. 14. Press briefly to return to the Key # Function menu; press for 3 seconds to return to the idle screen. Configuration.on.the.web.interface.. Font size and text alignment 1. Open the web interface of the phone. 2. Click Preferences in the menu on the left side of the window. 3. Click the Appearances tab. 4. Scroll down to Expansion Module Font Options and select font size and text alignment from the respective drop-down menus. The defaults are XL for Main Text and S for Sub Text size, and leftaligned for the text alignment. 5. Click Apply and Save. Function settings 1. Open the web interface of the phone. 2. Click Function keys in the menu on the left side of the window. The keys on the three pages of each module are numbered consecutively from 160 on each module: 18 D8C User Manual for Using the D8C with a D81x Phone Page 1: 120 Page 2: 2140 Page 3: 4160 Configuring the function keys 3. Click the Key Assignment tab, if necessary. 4. Scroll down to Expansion Keys and the expansion module you want to configure. 5. Under Context of the key you want to configure, select "Active" or one of the configured identities from the drop-down list. The default is "Active", i.e., the configured key is available for all configured identities on the phone. 6. Under Type, select "Extension" from the drop-down list. 7. In the Number text field, enter the phone number whose calls you want to monitor and pick up. 8. Optional: In the Label text field, enter a name or descriptive text. See "SmartLabels" on page 13 for more information. 9. Click Apply and Save. XML provisioning of settings The XML tags of the function keys are an exception from the general rules for XML mass provisioning of settings for Snom phones because the tag for each key specifies the exact settings for that particular key. The format is as follows: <fkey idx="n" context="active" label="x" default_text="$name $state" perm="">argument</fkey> Example: <fkey idx="33" context="active" short_label_mode="text" short_label="" short_default_ text="!!$(::)!!$(generate_via_conditional_label_short)" label_mode="icon_text" icon_type="" reg_ label_mode="icon_text" label="" lp="on" default_text="!!$(::)!!$(generate_via_conditional_label_full)" 19 D8C User Manual for Using the D8C with a D81x Phone Configuring the function keys perm="" c="1" cslm="1" clm="1">dest <sip:14147356@192.168.10.60;user=phone></fkey> For more information on function key types, see https://service.snom.com/display/wiki/ Function+Key+Types. For more information on valid values and defaults, see the individual settings at https://service.snom.com/display/wiki/Settings. · Parameter fkey idx. The unique identifier of the function key when connected to a particular phone model. NOTE: The fkey idx of a particular key depends on the number of function keys on the phone, the number of expansion modules connected to the phone, and the position of the module in the daisy chain. For your convenience, we have prepared a table of the numbering system; please see "Function key numbering system" on page 22. · Parameter context. This setting specifies the identity (account) that can use the key. The default is Identity 1. Valid settings: All active identities (accounts) registered on the phone: Setting "active". One identity specified by its number. Example: Setting "1" for Identity 1. Off Off · Parameter label. The label (name, etc.) to be shown on the expansion module's display. On the Function Keys page of the phone's web interface this is the string entered in the text field of Label. See "SmartLabels" on page 13. Examples for an extension setting. label="Joe Miller" displays Joe Miller . label="Joe Miller<br>1236" displays two lines: Joe Miller 1236 · Parameter default_text. Optional attribute that can be any string. When the parameter label is not set for a key, the value of default_text will be displayed as the key's label on the display of the D8C (see "Display layout" on page 12). You can define an arbitrary fixed text or use $name, $state, and $type to insert dynamic information. The default value is "$name $state". $name: Inserts the label or, if label is not set, the extension/phone number supplied as the key's argument. $state: Inserts the key's state (free, busy, etc.) when functions like line or extension are mapped onto the key. $type: Inserts the key type. · Parameter perm. Valid values are: - perm="!": The settings of the key can be changed by mass provisioning, but only if the end user has not made changes to the configuration on the phone itself or on its web interface. - perm="&", perm="R", perm=" ": The settings of the key are Read Only and cannot be changed by the end user. - perm="$", perm="RW", perm="": The settings of the key can be changed by mass provisioning; any end user configurations will be overwritten on reboot. · Argument. The default is line. Example: <fkey idx="19" context="1" label="" default_text="$name $state" perm="">line</fkey>. Examples for other functions: 20 D8C User Manual for Using the D8C with a D81x Phone Configuring the function keys NOTE: These settings depend on the requirements of the PBX. - Extension: <fkey idx="19" context="1" label="Mary" default_text="$name $state" perm="">dest sip:123@example.com;user=phone</fkey> - Speed dial: <fkey idx="20" context="1" label="Mary/cell" default_text="$name $state" perm="">speed 9175550240</fkey> - Multicast: <fkey idx="21" context="1" label="Announcements 2nd floor" default_ text="$name $state" perm="">multicast 239.255.255.232:5555</fkey> - Intercom: <fkey idx="22" context="1" label="Intercom Mary" default_text="$name $state" perm="">icom sip:123@example.com;user=phone</fkey> - Forwarding all incoming calls: <fkey idx="23" context="1" label="Fwd all to Mary" default_text="$name $state" perm="">redirect sip:123@example.com;user=phone</ fkey> - Transferring call: <fkey idx="24" context="1" label="Transfer" default_text="$name $state" perm="">transfer</fkey> 21 D8C User Manual for Using the D8C with a D81x Phone Function key numbering system Function key numbering system Definitions fkey idx: PUI: WUI: XML mass provisioning Phone user interface. Select the page on the D8C, longpress a key to open its edit window on the connected phone's display, and press Edit. Web user interface/phone manager (Function Keys page). The keys on the three pages of each module are numbered consecutively on each module: Page 1: P1P20 Page 2: P21P40 Page 3: P41P60 D815 · SmartLabel keys on phone: fkey idx 039, PUI fkey number 140 Page 1: fkey idx 09 PUI 110 WUI P1P10 Page 2: fkey idx 1019 PUI 1120 WUI P11P20 Page 3: fkey idx 2029 PUI 2130 WUI P21P30 Page 4: fkey idx 3039 PUI 3140 WUI P31P40 · D8C expansion module 1 Page 1 fkey idx Page 2 fkey idx Page 3 fkey idx 4059 PUI 6079 PUI 8099 PUI 4160 WUI 6180 WUI 81100 WUI P1P20 P21P40 P41P60 · D8C expansion module 2 Page 1 fkey idx 100119 PUI Page 2 fkey idx 120139 PUI Page 3 fkey idx 140159 PUI 101120 WUI 121140 WUI 141160 WUI P1P20 P21P40 P41P60 · D8C expansion module 3 Page 1 fkey idx 160179 PUI Page 2 fkey idx 180199 PUI Page 3 fkey idx 200219 PUI 161180 WUI 181200 WUI 201220 WUI P1P20 P21P40 P41P60 D812 · SmartLabel keys on phone: fkey idx 031, PUI fkey number 132 Page 1: fkey idx 07 PUI 18 WUI P1P8 22 D8C User Manual for Using the D8C with a D81x Phone Function key numbering system Page 2: fkey idx 815 PUI 916 WUI P9P16 Page 3: fkey idx 1623 PUI 1724 WUI P17P24 Page 4: fkey idx 2431 PUI 2532 WUI P25P32 · D8C expansion module 1 Page 1 fkey idx Page 2 fkey idx Page 3 fkey idx 3251 PUI 5271 PUI 7291 PUI 3352 WUI 5372 WUI 7392 WUI · D8C expansion module 2 Page 1 fkey idx 92111 PUI Page 2 fkey idx 112131 PUI Page 3 fkey idx 132151 PUI 93112 WUI 113132 WUI 133152 WUI · D8C expansion module 3 Page 1 fkey idx 152171 PUI Page 2 fkey idx 172191 PUI Page 3 fkey idx 192211 PUI 153172 WUI 173192 WUI 193212 WUI P1P20 P21P40 P41P60 P1P20 P21P40 P41P60 P1P20 P21P40 P41P60 D810 · SmartLabel keys on phone: fkey idx 015, PUI fkey number 116 Page 1: fkey idx 03 PUI 14 WUI P1P4 Page 2: fkey idx 47 PUI 58 WUI P5P8 Page 3: fkey idx 811 PUI 912 WUI P9P12 Page 4: fkey idx 1215 PUI 1316 WUI P13P16 · D8C expansion module 1 Page 1 fkey idx Page 2 fkey idx Page 3 fkey idx 1635 PUI 3655 PUI 5675 PUI 1736 WUI 3756 WUI 5776 WUI P1P20 P21P40 P41P60 · D8C expansion module 2 Page 1 fkey idx 7695 PUI Page 2 fkey idx 96115 PUI Page 3 fkey idx 116135 PUI 7796 WUI 97116 WUI 117136 WUI P1P20 P21P40 P41P60 23 D8C User Manual for Using the D8C with a D81x Phone Function key numbering system · D8C expansion module 3 Page 1 fkey idx 136155 PUI Page 2 fkey idx 156175 PUI Page 3 fkey idx 176195 PUI 137156 WUI 157176 WUI 177196 WUI P1P20 P21P40 P41P60 24 D8C User Manual for Using the D8C with a D81x Phone Firmware update Firmware update Manual update via the phone's web interface The phone must be running firmware 10.1.173.0 or higher. The name of the update's file must have the format snomD8C-<version>-r.bin. The file must be located on a server that can be reached by your phone. Update the expansion modules one at a time. Before the update, disconnect other modules from the phone. 1. Connect the expansion module you want to update to your phone. Wait until its LEDs have lit up and gone out and the labels are shown on the display. 2. Open the phone's web user interface. 3. Click System Information in the menu on the left side of the window, and confirm that the number of the USB expansion module is 1. 4. Click Software Update in the menu on the left side of the window. 5. Enter the HTTP URL to the update file into the Firmware text field of the Manual Expansion Module Software Update section and click Load. The progress of the update is shown on the phone's display. When it is finished, phone and expansion module will reboot. 6. After the reboot, click System Information again to check whether the new firmware version is displayed in the line below the module number. Update via provisioning The phone must be running firmware 10.1.173.0 or higher. The name of the update file's name must have the format snomD8C-<version>-r.bin. An example for the expansion module firmware syntax can be found at https://service.snom.com/display/wiki/Firmware+Update+XML+Settings. The file must be located on a server that can be reached by your phone. The phone's update policy settings must be auto_update (update automatically) or ask_for_update (ask for update, i.e., the user receives a prompt to confirm the update). 25 D8C User Manual for Using the D8C with a D81x Phone Firmware update Update the expansion modules one at a time. Before the update, disconnect other modules from the phone. Note: After an update via provisioning, the firmware_uxm parameter is set to the phone's URL to keep the phone from repeatedly downloading the update file and updating the expansion module. If you are provisioning updates for more than one D8C from the same phone, you must replace the phone's URL in the firmware_uxm parameter with the update file's URL before updating the next module. 1. Connect the expansion module you want to update to your phone. Wait until its LEDs have lit up and gone out and the labels are shown on the display. 2. Set the firmware_status setting to the update file's HTTP URL. The progress of the update is shown on the phone's display. When the update has been completed, phone and expansion module will reboot. 3. Repeat for each module to be updated. 26 Snom Technology GmbH Aroser Allee 66 13507 Berlin, Deutschland offi..ce.de@snom.com https://www.snom.com VTech Communications Inc. Snom Americas 9020 SW Washington Square Road, Suite 555 Tigard, OR 97223, U.S.A. Phone support: (339) 227 6160 Email support: supportusa@snom.com VTech Technologies Canada Ltd. Suite 222, 13888 Wireless Way Richmond, British Columbia Canada V6V 0A3 Phone support: (339) 227 6160 Snom Technology GmbH 130, avenue Joseph KESSEL 78960 Voisins-Le-Bretonneux, France Tel. +33 1 85 83 00 15 Fax +33 1 80 87 62 88 office.fr@snom.com Snom Technology GmbH Via Milano 1 20020 Lainate, Italia Tel. +39 02 00611212 Fax +39 02 93661864 office.it@snom.com Snom Technology GmbH The Courtyard, High Street Ascot, Berkshire SL5 7HP, U.K. Tel. +44 134 459 6840 Fax +44 134 459 7509 office.uk@snom.com Your specialist retailer - Ihr Fachhändler Votre distributeur - Su distribuidor - Il tuo rivenditore: © 2024 Snom Technology GmbH v1.02