Rapoo 7100 P Wireless Optical Mouse

Quick Start Guide (A.2)

Getting Started

Step 1: Insert Batteries

Open the battery compartment cover on the underside of the mouse. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.

Step 2: Connect USB Receiver

Connect the USB receiver to an available USB port on your computer. The mouse will automatically connect. Use the ON/OFF switch on the underside to conserve battery when not in use.

Step 3: DPI Adjustment and Setup

Your computer will detect the mouse and may initiate driver installation. The Rapoo 7100 P mouse features adjustable DPI (Dots Per Inch) for sensitivity control. Press the dedicated DPI button, typically found near the scroll wheel, to cycle between 500 DPI and 1000 DPI.

Support and Information

Troubleshooting

For the latest FAQs, drivers, and quick start guides, visit www.rapoo.com. For extensive service, register at www.rapoo.com.

Copyright

It is forbidden to reproduce any part of this quick start guide without the permission of Rapoo Technology Co., Ltd.

Safety Instructions

Do not open or repair this device. Do not use the device in a damp environment. Clean the device with a dry cloth.

Warranty

The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.

Regulatory Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example: use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Canada Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

	Rapoo 1510 Wireless Optical Mouse Quick Start Guide Get started with your Rapoo 1510 wireless optical mouse. This guide provides setup instructions, system requirements, safety information, and troubleshooting tips. Supports multiple languages.
	Rapoo M50 Plus Silent Wireless Mouse: User Guide & Setup Get started with your Rapoo M50 Plus Silent wireless mouse. This guide provides setup instructions, system requirements, safety information, and compliance details for this ergonomic optical mouse.
	Rapoo NX1820 Wired Optical Mouse & Keyboard Combo Quick Start Guide Get started quickly with the Rapoo NX1820 Wired Optical Mouse & Keyboard Combo. This guide covers system requirements, package contents, and compliance information for your new Rapoo device.
	Rapoo M10 Wireless Optical Mouse - Features and Specifications Discover the Rapoo M10 Wireless Optical Mouse, featuring a reliable 2.4 GHz connection, a high-resolution 1000 DPI sensor, and up to 9 months of battery life. Available in multiple colors with an ergonomic design for comfortable use.
	Rapoo Multi-mode Wireless Mouse Quick Start Guide Quick start guide for the Rapoo Multi-mode Wireless Mouse. Learn how to pair via Bluetooth and 2.4 GHz, switch devices, understand LED indicators, and check system requirements for models 6610M, 7200M, M300, M500, MT350.
	Rapoo M200 Multi-Mode Wireless Mouse: Connection Guide and FCC Compliance User guide for the Rapoo M200 multi-mode wireless mouse, detailing 2.4GHz and Bluetooth connection steps, indicator light meanings, and FCC compliance information.
	Rapoo MT750S Wireless Mouse User Manual and Specifications Comprehensive guide to the Rapoo MT750S wireless mouse, covering setup, features, and technical specifications. Learn about Bluetooth and 2.4G connectivity, battery charging, and button functions.
	Rapoo VT950C Gaming Mouse Quick Start Guide Concise guide for setting up and using the Rapoo VT950C wired/wireless gaming mouse, including DPI adjustment and troubleshooting.