User Guide for FRIEDRICH models including: KEL24A35B, Kuhl Kuhl Q Wallmaster, Kuhl, Kuhl Q, Wallmaster, Kuhl Wallmaster, Kuhl Q Wallmaster
Friedrich KEL24A35B Specialty Air Conditioner | Town Appliance
KCM24B30A by Friedrich - Kuhl KCM24B30A | Art's TV & Appliance
Wi-Fi Setup Guide FRIEDRICH CONNECT Kuhl Kuhl Q Wallmaster Let's Get Started! 1. Check for a 2.4 Ghz connection and make sure the device is connected to that network. 2. Download the Friedrich Connect App on your smartphone. 3. Sign into the app or create a account. 4. Verify the profile, check and confirm that the TIME ZONE is populated correctly. 5. Enter the Friedrich connect app and press "+ add". The app will automatically show the next screen. Prepare your device will pop up, but DO NOT PRESS START at this time. 6.Go to the unit press the MENU button and with the arrows go to CNCT and press MENU again. NOTE: When the setup process starts, the WI-FI symbol will begin to flash. This indicates the A/C unit is broadcasting its WiFi SSID. NOTE: Once the setup process has been started, you will have five minutes to complete the setup. If the setup cannot be completed in five minutes then you will need to restart the process. 7. Now on the mobile device go to your WiFi settings without ending the Connect App and connect to Friedrichconnect -xxxx SSID (the last 4 characters of the units MAC address are in the network name of the Friedrich unit) 8.Go back to the app and press START, you will receive a Looking for your device screen until the Unit is found, DO NOT LEAVE THIS SCREEN. 9. When the Mobile device and the Unit make a successful communication you will see the WiFi network selection screen. Your WiFi Network must be in the select dropdown, if it is not then press the Retry Button (this will refresh the listings and add in your network). Press Next, and enter the SSID password and press Next again. Note: The option to Enter credentials manually does not work. If all steps are performed properly and no SSIDs populate in the app but they are populated in the mobile devices WiFi listings, then the unit is not on the latest Firmware and will need a new User Interface. 10. The next window will show connected success. Just press OK, and you will see the new unit in devices with the serial number of the device as its name that can be changed in the units Info Tab. NOTE: If any step is deviated, the connection will not happen but Success will still display. NOTE: Your Home Screen Wi-Fi symbol will stop flashing and will show steady NOTE: A GREEN symbol will appear under the "Status" details and the name of your Friedrich unit which will appear with a number. for example: (62601032R01184660025) 11. Last step when you see the serial number under "MY DEVICES" you can select the unit and verify if is working, press MODE to change the temperature. NOTE: Sometimes it takes a few seconds for the command to register on the unit.Adobe InDesign 18.0 (Windows) (C) 2018 Retailer Web Services LLC, all rights reserved.