Digi-Land 10.1 Inch Octa Core Tablet Quick Setup Guide

Quick Setup Guide

10.1 Inch Octa Core Tablet

Features

This tablet features:

Diagram Description: The diagram shows the tablet with labels pointing to the USB-C port, memory card slot, and earphones port.

Important Safety Instructions

  1. Please read this instruction carefully before using your device to ensure safe and correct use.
  2. Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.
  3. Do not use this unit near water. Do not place over the unit any container with liquid inside.
  4. Please do not put your device in high temperature, moisture or dust place. The tablet is not waterproof.
  5. Avoid falling or violent collision. Do not violently shake the touch screen, otherwise, it could lead to damage or display abnormal.
  6. If system shutdown automatically, it means the battery may used up, battery charging is required.
  7. Please charge the tablet regularly if not in use for a long time to avoid the damage caused by the excessive consumption of battery.
  8. Do not disassemble or use alcohol, thinner or benzene class to swab product surface.
  9. Please do not use the tablet when driving or walking in the street, otherwise it may lead an accident.
  10. Please choose the appropriate volume, if had tinnitus, please lower the volume or stop using.
  11. When CPU operates in high speed, especially playing 3D games or High-definition video for a long time, the fuselage will have fever.
  12. The battery is contained with the device, please do not take out the battery.

FCC Notice

The following statement applies to all products that have received FCC approval. Applicable products wear the FCC logo, and /or an FCC ID in the format FCC ID: XMF-MID1036 on the product label. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna (s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

From the All APP screen tap on Settings-System-Certification Information to View Certification Information.

Warning Statement

Operation is subject to the following two conditions: this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

This TABLET meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: TABLET has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body.

To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Getting Started

1. Charging the battery

Note: Charge your tablet fully before using it the first time.

  1. Connect the USB cable to your tablet.
  2. Connect the other end of the USB cable to the USB power adapter (wall charger), then plug the adapter into a power outlet. It takes about three hours to fully charge your tablet.

Caution: Use only the included power adapter to charge your tablet's battery. An incompatible adapter may damage your tablet.

Diagram Description: Shows a USB cable connecting from the tablet's USB-C port to a wall adapter plugged into a power outlet.

2. Turning on your tablet

Press and hold the [power-icon] button on the side of your tablet.

Diagram Description: Shows the tablet with an arrow pointing to the power button on the side, and a hand pressing it.

3. Setting up your tablet

When you turn on your tablet for the first time, you'll be prompted to set up things like Wi-Fi and email. Follow the instructions displayed on your tablet to complete setup.

Diagram Description: Shows a screen with options like "Welcome", "English (United Kingdom)", "English (United States)", and "Español (España)", indicating language selection during setup.

4. Turning off your tablet:

  1. Press and hold the [power-icon] button for 1 second to turn off tablet.
  2. Tap Power Off.

Diagram Description: Shows the tablet screen with a prompt to "Power Off" and a hand tapping it.

Guía de instalación rápida (Quick Setup Guide - Spanish)

10.1 Inch Octa Core Tableta

Características

Esta tableta cuenta con:

Descripción del diagrama: El diagrama muestra la tableta con etiquetas que apuntan al puerto USB-C, la ranura para tarjeta de memoria y el puerto para auriculares.

Instrucciones de seguridad importantes (Important Safety Instructions - Spanish)

  1. Por favor, lea atentamente este manual antes de usar su dispositivo para asegurar un uso seguro y correcto.
  2. Siempre deje suficiente espacio para ventilación alrededor del producto. No coloque el producto en la cama, alfombra, librero o gabinete que pueda obstruir el flujo de aire a través de las aberturas de ventilación.
  3. No utilice esta unidad cerca del agua. No coloque ningún recipiente con líquido en su interior sobre la unidad.
  4. Por favor, no exponga el dispositivo a alta temperatura, humedad o lugares polvorientos; la tableta no es resistente al agua.
  5. Evite caídas o colisiones violentas. No agite violentamente la pantalla táctil, de lo contrario, podría causar daños o una visualización anormal.
  6. Si el sistema se apaga automáticamente, significa que la batería puede haberse agotado y requiere carga.
  7. Por favor, cargue la tableta regularmente si no se usa durante mucho tiempo para evitar daños causados por el consumo excesivo de la batería.
  8. No desmonte el producto. No utilice alcohol, disolvente o benceno para limpiar la superficie del producto.
  9. Por favor, no use la tableta mientras conduce o camina por la calle, de lo contrario, podría causar un accidente.
  10. Por favor, elija el volumen adecuado. Si experimenta tinnitus, baje el volumen o deje de usar.
  11. Cuando la CPU funciona a alta velocidad, especialmente al jugar juegos 3D o ver videos de alta definición durante mucho tiempo, el dispositivo puede calentarse.
  12. La batería está integrada en el dispositivo y no se puede extraer.

AVISO FCC (FCC Notice - Spanish)

La siguiente declaración se aplica a todos los productos que han recibido la aprobación de la FCC. Los productos aplicables llevan el logotipo de la FCC y/o un ID de la FCC en el formato FCC ID: XMF-MID1036 en la etiqueta del producto. Este dispositivo cumple con la Parte 15 de las Reglas de la FCC. La operación está sujeta a las siguientes dos condiciones: (1) este dispositivo no puede causar interferencia dañina, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar una operación no deseada.

Este dispositivo móvil ha sido probado y cumple con los límites para un dispositivo digital de Clase B, de conformidad con la Parte 15 de las Reglas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias perjudiciales en una instalación residencial.

Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia. Si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en la recepción de radio o televisión. Se recomienda al usuario intentar corregir la interferencia mediante una o más de las siguientes medidas:

Los cambios o modificaciones no aprobados expresamente por la parte responsable del cumplimiento pueden anular la autoridad del usuario para operar el equipo. Las antenas utilizadas para este transmisor no deben ubicarse ni funcionar junto con ninguna otra antena o transmisor.

Para ver la información de certificación, toque Configuración > Sistema > Información del sistema de certificación en la pantalla Todas las aplicaciones.

Declaración de advertencia (Warning Statement - Spanish)

La operación está sujeta a las siguientes dos condiciones: este dispositivo no puede causar interferencia, y este dispositivo debe aceptar cualquier interferencia, incluidas las interferencias que puedan causar un funcionamiento no deseado del dispositivo.

Deben usarse cables blindados con esta unidad para garantizar el cumplimiento de los límites de la FCC Clase B.

Esta TABLET cumple con los requisitos del gobierno para la exposición a ondas de radio. Las pautas se basan en estándares desarrollados por organizaciones científicas independientes a través de una evaluación periódica y exhaustiva de estudios científicos. Los estándares incluyen un margen de seguridad sustancial diseñado para garantizar la seguridad de todas las personas, independientemente de su edad o salud.

Información y Declaración de Exposición RF de la FCC (FCC RF Exposure Information and Statement - Spanish)

El límite de SAR de EE. UU. (FCC) es de 1.6 W/kg promedio sobre un gramo de tejido. Los tipos de dispositivos: TABLET también han sido probados contra este límite de SAR. Este dispositivo fue probado para operaciones típicas con el dispositivo en el cuerpo, manteniendo la parte posterior de la tableta a 0 mm del cuerpo.

Para mantener el cumplimiento de los requisitos de exposición RF de la FCC, utilice accesorios que mantengan una distancia de separación de 0 mm entre el cuerpo del usuario y la parte posterior de la tableta. El uso de clips para cinturón, fundas y accesorios similares no debe contener componentes metálicos en su ensamblaje. El uso de accesorios que no cumplan estos requisitos puede no cumplir con los requisitos de exposición RF de la FCC y debe evitarse.

Carga de la batería (Charging the battery - Spanish)

Nota: cargue completamente la batería antes de usarla por primera vez.

  1. Conecte el cable USB a su tableta.
  2. Enchufe el otro extremo del cable USB al adaptador de alimentación USB (cargador de pared) y conecte el adaptador a un tomacorriente. Se necesitan aproximadamente tres horas para cargar completamente su tableta.

Cuidado: use solamente el adaptador de alimentación incluido para cargar la batería de su tableta. Un adaptador incompatible puede dañar su tableta.

Diagram Description: Muestra un cable USB conectándose desde el puerto USB-C de la tableta a un adaptador de pared enchufado a una toma de corriente.

Encendido de su tableta (Turning on your tablet - Spanish)

Mantenga presionado el botón [power-icon] en el lateral de su tableta.

Diagram Description: Muestra la tableta con una flecha apuntando al botón de encendido en el lateral, y una mano presionándolo.

Preparación de su tableta (Setting up your tablet - Spanish)

Cuando encienda su tableta por primera vez, se le pedirá que configure funciones como Wi-Fi y correo electrónico. Siga las instrucciones que se muestran en su tableta para completar la instalación.

Diagram Description: Muestra una pantalla con opciones como "Welcome", "English (United Kingdom)", "English (United States)" y "Español (España)", indicando la selección de idioma durante la configuración.

Para apagar su tableta (Turning off your tablet - Spanish)

  1. Mantenga pulsados los botones [power-icon] durante 1 segundo para apagar la tableta.
  2. Toque "Apagar" (Power Off) en la pantalla.

Diagram Description: Muestra la pantalla de la tableta con una indicación para "Apagar" (Power Off) y una mano tocándola.

Models: MID1058, XMFMID1058, MID1036-IM-2024, MID1058 10.1 Inch Octa Core Tablet, MID1058, 10.1 Inch Octa Core Tablet, Octa Core Tablet, Core Tablet, Tablet

File Info : application/pdf, 1 Pages, 796.29KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7493095

References

Adobe Illustrator 24.0 (Windows) Adobe PDF library 15.00

Related Documents

Preview Digiland M11 Pro Quick Start Guide
A quick start guide for the Digiland M11 Pro tablet, covering initial setup, charging, basic operations, and important FCC compliance information.
Preview Digiland Limited Product Warranty Information
Official limited product warranty details for Digiland electronics, covering terms, exclusions, and claim procedures. Includes 90-day parts and labor warranty.