User Manual for SKILCRAFT models including: NVM001 Vertical Mouse, NVM001, Vertical Mouse, Mouse
ChicagoTronics, Inc. NVM001R NVM001 Vertical Mouse Receiver 2AHKSNVM001R 2AHKSNVM001R nvm001r
06.11.01. M901TNovaport 70x90mm140x90mm 100 1 Wireless Mouse Model: NVM001M M FCC ID: 2AHKSNVM001M M Forward Button Backward Button 2.4G Battery Storage 1.Open the battery cover Install the battery and slide power switch to "ON". . 2.Remove the USB receiver 4.Press the mode switch until the white light illuminates, indicating USB mode is activated. 1.Open the battery cover Install the battery and slide power switch to "ON". 3. Long press the modeswitch button for 3-5seconds until the white light flashes quickly, this means the mouse is in Bluetooth pairing mode. BT3.0 Mouse / BT5.0 Mouse . BT5.0 Mouse is the preferred pairing. BT3.0 Mouse BT5.0 Mouse Mouse BT3.0 Mouse / BT5.0 Mouse (System requirememt: BT3.0 supports Win XP, Win7/8/10 or higher, Mac OS systems. BT5.0 supports Win8/10 or higher, Mac OS systems.) BT3.0 Mouse BT5.0 Mouse BT3.0 Mouse BT5.0 Mouse Mouse BT3.0 Mouse / BT5.0 Mouse (System requirememt: BT3.0 supports Win XP, Win7/8/10 or higher, Mac OS systems. BT5.0 supports Win8/10 or higher, Mac OS systems.) BT3.0 Mouse BT5.0 Mouse BT3.0 Mouse BT5.0 Mouse Mouse BT3.0 Mouse / BT5.0 Mouse (System requirememt: BT3.0 supports Win XP, Win7/8/10 or higher, Mac OS systems. BT5.0 supports Win8/10 or higher, Mac OS systems.) BT3.0 Mouse BT5.0 Mouse Mouse BT3.0 Mouse / BT5.0 Mouse (System requirememt: BT3.0 supports Win XP, Win7/8/10 or higher, Mac OS systems. BT5.0 supports Win8/10 or higher, Mac OS systems.) BT3.0 Mouse BT5.0 Mouse Wirless Mouse Product name:NVM001 Vertical Mouse Model:NVM001M FCC ID:2AHKSNVM001M USB Receiver Product name:NVM001 Vertical Mouse Receiver Model:NVM001R FCC ID:2AHKSNVM001R 800/1200/1600 cycles Battery AA1.5 109x78x68mm 85g 1.5 1.5 systems systems User Manual AA alkaline battery FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Adobe PDF library 11.00 Adobe Illustrator CC 2014 (Windows)