Castle Creations Mamba Monster X 8S Quick Start Guide

This guide provides essential information for setting up and operating the Mamba Monster X 8S Electronic Speed Control (ESC).

About the Mamba Monster X 8S

The Mamba Monster X 8S is designed for 1/6 scale RC vehicles weighing up to 25 lbs. It is capable of handling significant power, but it is crucial to use a motor that matches its capabilities. Always monitor motor, battery, and controller temperatures, ensuring the motor does not exceed 100° C (212° F) to prevent damage.

For optimal performance and longevity, start with the manufacturer's recommended gearing. If you adjust gearing, motor, or battery, frequently check motor temperatures. If the motor overheats, increase the spur gear size, decrease the pinion gear size, or reduce the battery pack voltage.

The Mamba Monster X 8S is programmable via transmitter using the Driver's Ed Guide, or through a computer using a Castle Link USB adapter. It can also be programmed using a mobile device with a Castle B-Link Bluetooth® Adapter or a Castle Field Link Portable Programmer (sold separately).

Data logging is a key feature, allowing you to measure and record power system information during operation. This data can be downloaded and analyzed using Castle Link to inspect parameters like battery voltage, motor RPM, and ESC temperature. More details on data logging can be found in the Driver's Ed Guide.

Mamba Monster X 8S Specifications

Category	Details
Application Guidelines	1/6th scale RC Hobby vehicles weighing up to 25lbs.
Input Voltage Range	Min: 2S LiPo, Max: 8S LiPo, 33.6V
BEC Specifications	Adjustable: 5.5V, 6.0V, 7.5V, or 8.0V (8A Peak), default 5.5V
Sensors	Yes, with sensor harness (included in package).

Product Use Statement

Applying voltages higher than 33.6V will cause irreparable damage to your controller.
Recommended battery capacity for this ESC is 5000mAh or larger. Use 30C continuous discharge or higher LiPo batteries, or high-quality 25C batteries.
The Mamba Monster X 8S has 6.5mm bullet connectors. Battery input wires are bare; solder your preferred connector rated for 70+ amps.
This ESC is not intended for human or animal propulsion.

*Failure to adhere to the Product Use Statement may void the warranty and incur service fees for repairs.

Getting Started

Solder a high-quality battery connector to the ESC (refer to Driver's Ed Guide for "Connectors and Power Wiring").
Mount the ESC and motor into the vehicle.
Connect the motor to the ESC (refer to Driver's Ed Guide for "Motor Wiring").
Plug the RX wire into the throttle (#2) channel on your receiver and the AUX wire into the auxiliary (#3/#4) channel.

You are now ready to go!

Receiver Connection

RX Wire: Plug the RX wire into the throttle (#2) channel on your receiver.

AUX Wire: The AUX wire allows for on-the-fly setting adjustments using an auxiliary channel on your receiver. This function is disabled by default and can be programmed via Castle Link. Plug this wire into an auxiliary channel (#3/#4) on your receiver.

Throttle Calibration

Ensure the radio is on, the battery is plugged in, and the ESC is off.
Hold full throttle and turn the ESC on (indicated by a green LED).
When the red LED flashes, move the throttle to full reverse.
When the yellow LED flashes, move the throttle to neutral.
The system is now armed and ready.

Transmitter Programming Reference

Setting	Options
1. Brake/Reverse Type	• With Reverse* • Without Reverse • Crawler Reverse
2. Voltage Cutoff	• Normal* • Auto-Lipo* • None
3. Brake Amount	• 25% • 50%* • 75% • 100%
4. Drag Brake	• Disabled* • 10% • 20% • 30% • Crawler Full On
5. Motor Type	• Brushless* • Brushed Reversing
6. Motor Direction	• Reverse • Forward*

*Default Setting

Audible Alert Reference

Start Fail ?
Low Voltage Cutoff ?
Over-Current ?
Sensors Lost ?
Radio Glitch ?
Over-Temperature ?
Excessive Load ?
AUX Wire Radio Glitch ?
BEC Over-Temperature ?
Data Log Full Warning ?
Motor Over-Temperature ?

Driver's Ed Guide

For comprehensive details on Getting Started, Throttle Calibration, Castle Link usage, and Transmitter Programming, please consult the Driver's Ed Guide. You can access it online at www.castlecreations.com/MMX8SDEG. A QR code is also provided for quick access via smart device.

	Castle Creations Mamba X Series Driver's Ed Guide This guide provides comprehensive instructions for setting up, wiring, calibrating, and tuning Castle Creations Mamba X Series surface power systems for RC vehicles. It covers essential information on batteries, motor connections, radio setup, troubleshooting, and advanced features accessible via Castle Link software.
	Castle Creations Mamba XLX2 ESC Quick Start Guide Quick start guide for the Castle Creations Mamba XLX2 Extreme 1:5 Scale Waterproof Electronic Speed Controller, covering setup, specifications, programming, and calibration for RC hobby vehicles.
	Mamba Max Pro Quick Start Guide: Setup and Features Get started quickly with the Castle Mamba Max Pro speed controller. This guide covers sensored motor setup, CHEAT mode, BEC voltage, and Smart Sense technology for RC cars.
	Mamba Max Pro ESC Quick Start Guide - Castle Creations Quick start guide for the Castle Creations Mamba Max Pro 1/10th scale sensored car speed controller, covering setup, features like Smart Sense and CHEAT Mode, and BEC voltage.
	Castle Creations Mamba Micro X2 Quick Start Guide: Setup and Specifications Comprehensive quick start guide for the Castle Creations Mamba Micro X2 ESC, covering setup, specifications, programming, and troubleshooting for RC vehicles.
	Castle Creations Mamba-25 ESC User Guide User guide for the Castle Creations Mamba-25, a 25 Amp Brushless Sensorless Speed Control for RC Cars and Trucks. This manual covers features, connections, programming, troubleshooting, and warranty information.
	Castle Copperhead 10 Drivers Ed Guide Comprehensive guide to setting up, calibrating, and tuning the Castle Creations Copperhead 10 Electronic Speed Controller (ESC) for RC vehicles, including wiring, programming, and troubleshooting.
	Castle Creations Hydra X 8S Quick Start Guide Get started quickly with the Castle Creations Hydra X 8S marine speed controller. This guide covers setup, specifications, programming, and troubleshooting for your high-performance RC boat.