NTQ
Better Life Together
Contact: ? 626 679 3588 | ✉️ support@trendytotesinc.com | ? 162 Atlantic St, Pomona, CA 91768
ASSEMBLY INSTRUCTIONS BATHROOM VANITY TOP
Model NBT-FA30W
Product Overview & Dimensions
This document provides assembly and installation instructions for the NTQ NBT-FA30W Bathroom Vanity Top.
The technical drawing displays the top view of the NTQ NBT-FA30W bathroom vanity top. Key dimensions are indicated: overall width is 30 3/8 inches, and overall depth is 22 inches. The integrated sink basin has a width of 23 3/4 inches and a depth of 9 5/8 inches. The holes for the faucet are designed for a 1 3/8 inch diameter, and the drain hole is 1 3/4 inches in diameter. The corners of the vanity top are rounded with a radius of R23/8 inches.
Installation Steps
Note: Any size of the vanity's installation steps are the same.
- Prepare the Vanity: Make sure the vanity is in place and securely attached to the wall.
-
Seal the Edges: To prevent water damage and ensure a clean finish, apply a bead of silicone caulk along the edges where the countertop meets the vanity.
(Visual Description: A line drawing illustrates the application of silicone caulk along the top edge of a vanity cabinet.)
-
Attach the Countertop: Secure the solid surface countertop on the vanity.
(Visual Description: A line drawing depicts the solid surface countertop being carefully placed onto the prepared vanity cabinet.)
Home Services & Support
Missing Part or Defective?
Please Contact the Customer Service Team:
✉️ support@trendytotesinc.com
[QR Code for Installation Video]
