GIANNI INDUSTRIES, INC.
Owner's Manual for GIANNI INDUSTRIES INC models including: PSB Series Linear Power Supplies with High Performance Toroidal Transformer, PSB Series, Linear Power Supplies with High Performance Toroidal Transformer, Linear Power Supplies, Power Supplies, Supplies
The GEM family of PSB series linear power supplies is specifically designed to support electrified locks and access control systems. It can serve as an uninterruptible power
File Info : application/pdf, 1 Pages, 92.71KB
DocumentDocumentPower Supplies PSB Series Linear Power Supplies with High Performance Torodial Transformer GPD-3015-PLUS Optional Power Distribution Board PPTC resettable fuse protection Maximum output rating 1 amp The GEM family of PSB series linear power supplies is specifically designed to support electrified locks and access control systems. It can serve as an uninterruptible power source that provides emergnecy power when the input power fails. The PSB series is equipped with a toroidal transformer that features low operating temperature and high electrical efficiency. Standard Features Filtered & regulated DC output Sealed lead acid battery charging capability (Battery not included, Maximum battery size 12VDC/7AH) Battery power disconnects when battery is fully charged LED indicators (For AC/DC/Battery status) Contact Ports: 3 (two for locks, one for backup battery) Protection Low battery voltage DC short circuit Reverse battery polarity AC & DC overcurrent DC thermal overload PSB Series Power Supplies Models PSB3A-230-12N PSB3A-230-24N Input Output Voltage Voltage (VAC) (VDC) 220-240 3A/13.8 3A/27.6 Contact Ports 3 Status LED AC,DC,Battery Low Voltage Tamper Toroidal Protection Switch Transformer (VDC) Dimensions 9 -10.5 19 - 21.5 12 5/8"x 12 13/16"x 3 1/2" (320 x 325 x 89.5mm) PSB5A-230-12N PSB5A-230-24N 220-240 5A/13.8 5A/27.6 3 AC,DC,Battery 9 -10.5 19 - 21.5 12 5/8" x 12 13/16" x 3 1/2" (320 x 325 x 89.5mm) Note: All above models are available by special order on 110-120VAC operation. Warranty The product is warranted against defects in material and workmanship while used in normal service for a period of 5 years from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice. GIANNI INDUSTRIES, INC. Tel: +886-2-2267-7986 Fax: +886-2-2267-9876 www.gianni.com.tw inquiry1@gianni.com.tw