JVC HA-FW1800 Inner Ear Headphones
Specifications
| System | Dynamic |
|---|---|
| Sensitivity | 103 dB/1mW |
| Frequency response | 6Hz ~ 52,000Hz |
| Nominal impedance | 16 Ω |
| Max. Input Capability | 200mW (IEC) |
| Cord Length | 1.2m |
| Plug | Gold Plated |
| Weight (without cord) | 15.0g |
| Accessory | S/MS/M/ML/L silicone earpieces, Carrying case |
Instructions
Hi-Res Audio
The product with this logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.
Changing Ear Pieces
To ensure proper fit and good sound, select the size of the ear piece.
A good fitting provides good bass.
Detach the Ear Piece
Twist and pull the ear piece off the nozzle.
Attach the Ear Piece
Slide on a ear piece so that it completely covers the nozzle.
Correct: ✔️ A properly attached ear piece fits snugly.
Incorrect: ❌ An improperly attached ear piece may not seal correctly.
How to Use
Install the headphone cable to the headphones by aligning the "L (Left)" and "R(Right)" markings on the cable with those on the headphones.
Detachable Cable
Warranty is not applicable if a third-party's cable is used.
Detach the Cable
Pull the plug straight out from the headphone jack.
- To prevent accidental separation, the connector has a snug fit.
- Do not pull the cable itself.
Attach the Cable
- When attaching the cable, identify the color and the marking on the headphones and the cable. (L: Blue, R: Red)
- Insert the plug straight into the headphone jack. Listen for a click when connecting.
Caution
The detachable function is provided for maintenance. Detach the cable only for replacing. Do not use any tools.
