Instruction Manual for Alveo3D models including: P3D, P4D, P3D HEPA H14 Filter for 3D Printer, P3D, HEPA H14 Filter for 3D Printer, Filter for 3D Printer, 3D Printer, Printer
1 day ago —
Filtro P4D para impresora 3D FDM | Alveo3D
HEPA H14 FILTER - P4D : USER INSTRUCTION FILTER FOR 3D PRINTER Slot with dimensions between 156mm and 159mm is the recommanded to ensure good sealing. We do not recommend to make a slot under
File Info : application/pdf, 4 Pages, 255.78KB
DocumentDocumentHEPA H14 FILTER - P3D : USER INSTRUCTION FILTER FOR 3D PRINTER HEPA (High efficiency particulate air) filter category H14 99,995% for the most penetrating particle size (MPPS) 0.3µm. combined with activated carbon granules 1-3mm mesh size. That filter category is recommanded by the French National Center of Scientific research for FDM 3D printers. DIMENSIONS DRAWING 53 MM 160 MM 4 MM 156 MM 50MM 160 MM 156 MM Filter size inclunding the sealing foam. We recommand you to follow these dimensions if you want to design a slot for this filter. Air flow direction In Out Recommandations Handle filter with caution. If the HEPA surface (the white pleated surface) is damaged, the filter lost efficiency. Protect your hands when you take off used filter and put it in a plastic bag. A saturated filter is not recycable. HEPA H14 FILTER - P4D : DATASHEET FILTER FOR 3D PRINTER LIFETIME Filter working life are associated with many factors including: filament type, melting temperature, concentration of nanoparticles and VOCs, ambiant humidity... We suggest to replace HEPA filter P4D according to the following table: Filter replacement Intensive use 4 months Occasional use 8 months We do not recommend going above 900 hours of use before to replace the filter. SPECIFICATIONS Actual dimensions 160 x 160 x 53 mm Frame dimensions 150 x 150 x 50 mm Sealing EPDM Foam Filter grade HEPA H14 Activated Carbon Type Granules 1-3 mm mesh Filter Type Pleated Panel & honeycombs Media Material Cotton, PP & PET Pressure Drop (with max. air flow) Maximum Air Flow 120 Pa 55 m3/h Operating temperature Weight 0-60 °C 290g www.alveo3d.com for any technical issues: contact@alveo3d.com HEPA H14 FILTER - P4D : USER INSTRUCTION FILTER FOR 3D PRINTER FOAM DIMENSIONS DRAWING Slot with dimensions between 156mm and 159mm is the recommanded to ensure good sealing. 159 MM 156 MM 159 MM 156 MM We do not recommend to make a slot under 156mm x 156 mm, if you compress more the geometry of the frame will be distorted www.alveo3d.com for any technical issues: contact@alveo3d.com HEPA H14 FILTER - P4D : USER INSTRUCTION FILTER FOR 3D PRINTER FIXED DIMENSIONS DRAWING Notice the frame is assembled by hand and we have a tolerance of +/- 1 mm. 150 MM 130 MM 150 MM 130 MM www.alveo3d.com for any technical issues: contact@alveo3d.com