Instruction Manual for navLinkz models including: V5-CIC-E-PNP BMW and Mini with Navigation System, V5-CIC-E-PNP, BMW and Mini with Navigation System, Mini with Navigation System, Navigation System, System
File Info : application/pdf, 22 Pages, 1.04MB
DocumentDocumentv.LOGiC Intelligent Solution Interface V5-CIC-E-PNP Compatible with the E-series BMW and Mini with navigation system or radio and 6.5" or 8.8" monitor with 4pin HSD LVDS connector Version 05.04.2024 V5-CIC-E-PNP Product features · Own on-screen display and setup · Rear-view camera input · Automatic switching to rear-view camera input on engagement of reverse gear from all operation modes · Front camera input / SMART-LINK input · Control of SMART-LINK module over iDrive control panel · Manual switching to rear-view camera (only for vehicles with PDC button) · Manual return from rear-view and front camera (cancellation of automatic switching) · 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear) · Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics · Compatible with all factory video accessories (e.g. rear-view camera, Top-View, nightvison, DVD-changer, TV-tuner) · USB update-port for software-updates by consumer Page1 Version 05.04.2024 V5-CIC-E-PNP Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the DIP switches of the interface-box V5C-M636 1.4. LED's of the interface-box V5C-M636 2. Connection schema 3. Installation 3.1. 3.2. 3.2.1. 3.2.1.1. 3.2.1.2. 3.2.2. 3.2.2.1. 3.2.2.2. 3.2.2.3. 3.2.3. 3.2.3.1. 3.2.3.2. 3.2.3.3. 3.2.4. 3.3. 3.4. Connecting interface-box and harnesses LVDS connection After-market front camera Connection to the after-market front camera Settings for connecting an after-market front camera After-market rear-view camera Connection to the after-market rear-view camera Settings for connecting an after-market rear-view camera Settings for OEM rear-view camera SMART-LINK SMART-LINK video and control connection SMART-LINK audio connection Settings for SMART-LINK connecting Configurable trigger outputs Picture settings Picture format settings 4. Operation 4.1. 4.1.1. 4.1.1.1. 4.1.1.2. 4.1.2. 4.2. 4.3. 4.4. OSD On-screen display OSD Operation 8-button iDrive 2-button iDrive in Mini OSD Additional setting options Video-in-motion function Selecting the interface as current video-source Controlling of the connected SMART-LINK module 5. Specifications 6. Connections (interface-box) 7. Technical support Page2 Version 05.04.2024 V5-CIC-E-PNP Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle's software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Page3 Version 05.04.2024 V5-CIC-E-PNP 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. Interface-box V5C-M636 HW_____ SW_____ LVDS cable CAB-HSD-MG060-OZ V5C-UNI01 harness LVDS cable CAB-HSD-DD075-O TV-BM01 harness 1.2. Check compatibility of vehicle and accessories Requirements Navigation Note E-series and Mini with navigation system or radio with 6.5" or 8.8" monitor (E-series) with 4pin HSD LVDS connector "PDC picture in picture" function is only for 8.8" monitor available Page4 Version 05.04.2024 V5-CIC-E-PNP 1.3. Setting the DIP switches of the interface-box V5C-M636 DIP 1 and 2 on the back of the interface-box V5C-M636 are used to set the monitor type. The default setting is: Vehicle/ navigation CIC-E (E-series), 6.5" monitor version 1 CIC-E (E-series), 6.5" monitor version 2 CIC-E (E-series), 8.8" monitor DIP 1 OFF ON OFF DIP 2 OFF OFF ON DIP 3 OFF ON OFF After each change of the DIP switch settings you have to execute a power reset of the interface-box! 1.4. LED`s of the interface-box V5C-M636 Valid%input source CAN%ok Power Page5 Version 05.04.2024 V5-CIC-E-PNP 2. Connection schema Page6 Version 05.04.2024 V5-CIC-E-PNP 3. Installation Switch off ignition and disconnect the vehicle's battery! The interface needs a permanent 12V source. If according to factory rules disconnecting the battery is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. If power source is not taken directly from the battery, the connection has to be checked for being start-up proven and permanent. Prior to wire and device installation we suggest to connect and test correct function of all after-market and factory infotainment equipment! The interface is installed on the backside of the head unit. 3.1. Connecting interface-box and harnesses 1 Remove the female Quadlock connector of the vehicle harness from the rear of the navigation computer. 2 Remove optical leads from the female Quadlock connector of the vehicle harness and insert them into the female Quadlock connector of harness TV-BM01 at the same position. 3 Connect female Quadlock connector of vehicle harness to the male Quadlock connector of harness TV-BM01. 4 Connect female Quadlock connector of harness TV-BM01 to the male Quadlock connector of the navigation computer Version 05.04.2024 V5-CIC-E-PNP Page7 5 Connect female 8 pin molex connector of the harness TV-BM01 to the male 8 pin molex connector of the harness TV-BM01. 6 Connect female 12pin AMP connector of the harness TV-BM01 to the front site of the V5C-M636 interface box. 3.2. LVDS connection 1 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O to the male 4pin HSD LVDS connector (LVDS-IN) on the rear of the interface-box V5C-M636. 2 Remove the pink female 4pin HSD LVDS connector of the vehicle harness at the back of the head unit and connect it to the male 4pin HSD LVDS of the CAB-HSD-MG060-OZ LVDS cable. 3 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-MG060-OZ to the male 4pin HSD LVDS connector (LVDS-OUT) on the rear of the interface-box V5C-M636. 4 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O to the pink male 4pin HSD LVDS connector on the rear of the head unit. Version 05.04.2024 V5-CIC-E-PNP Page8 3.2.1. After-market front camera 3.2.1.1. Connection to the after-market front camera V5C)UNI018 harness 1 Interface)box V5C)M636 FRONT +12V8camera power 2 Power&Out&1&(max.&1A) Front8camera 1 Connect the video RCA of the after-market front camera to the female RCA connector "FRONT CAM" of the interface box V5C-M636. 2- The pink wire of harness V5C-UNI01 can be used for +12V electric power supply (max. 1A) of the after-market front camera. Configure in the OSDmenu "MISC", menu item "POWER OUT 2" the designated electric power supply (see chapter "Configurable switching outputs"). - Page9 Version 05.04.2024 V5-CIC-E-PNP 3.2.1.2. Settings for connecting an after-market front camera You have to configure some settings in the OSD-menus INPUTS and MISC if you want to connect an after-market front camera (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu Menu item Setting Explication FRONT CAM OFF No front camera connected ON Switches to front camera if parking process is enabled and reverse gear is released INPUTS Intelligent ReverseLogic For vehicles with PDC button. Enabled while parking process and up to 20 km/h or together with PDC if existing Gear only For vehicles without PDC button. Enabled while parking process and up to 20 km/h. MISC Horizontal OEM PDC CAR Vertical PDC-display of the vehicle is horizontal PDC-display of the vehicle is vertical - Note: You can deactivate the enabled parking process by pressing the iDrive or by enabling other modes (e.g. radio). After deactivation you can't enable the parking process again until the vehicle is diving faster than 20km/h, the ignition is switched off and on or the PDC will be disabled and enabled again, if existing. Page10 Version 05.04.2024 V5-CIC-E-PNP 3.2.2. After-market rear-view camera 3.2.2.1. Connection to the after-market rear-view camera 1 Connect the video RCA of the after-market rear-view camera to the female RCA connector "REAR CAM" of the interface box V5C-M636. 2- The green wire of harness TV-BM01 can be used for +12V electric power supply (max. 1A) of the aftermarket rear-view camera. Configure in the OSDmenu "MISC", menu item "POWER OUT 2" the designated electric power supply (see chapter "Configurable switching outputs"). Version 05.04.2024 V5-CIC-E-PNP Page11 3.2.2.2. Settings for connecting an after-market rear-view camera You have to configure some settings in the OSD-menus INPUTS and MISC if you want to connect an after-market rear-view camera (Operation of the OSD: see chapter "OSDOperation"). OSD-menu Menu item Setting Explication OFF No rear-view camera connected INPUTS REAR CAM ON OEM Switches to rear-view camera if reverse gear is engaged and/or PDC-display is displayed If a factory rear-view camera is existing! Interface turns off, if PDC or reverse gear is enabled and it displays factory rear-view camera and/or PDC-display Intelligent ReverseLogic For vehicles with PDC button. Enabled while parking process and up to 20 km/h or together with PDC if existing Gear only For vehicles without PDC button. Enabled while parking process and up to 20 km/h. MISC Horizontal OEM PDC CAR Vertical PDC-display of the vehicle is horizontal PDC-display of the vehicle is vertical - Note: You can deactivate the enabled parking process by pressing the iDrive or by enabling other modes (e.g. radio). After deactivation you can't enable the parking process again until the vehicle is diving faster than 20km/h, the ignition is switched off and on or the PDC will be disabled and enabled again, if existing. 3.2.2.3. Settings for OEM rear-view camera OSD-menu Menu item Setting RVC INPUTS OEM Reverse Logic Intelligent Explication If a factory rear-view camera is existing! The interface turns off, if PDC or reverse gear is enabled and it displays factory rear-view camera and/or PDC-display For vehicles with PDC button. Enabled while parking process and up to 20 km/h or together with PDC if existing Version 05.04.2024 V5-CIC-E-PNP Page12 3.2.3. SMART-LINK The front camera input can alternatively be used for SMART-LINK set (CarPlay® & Android Auto® module) connection. In addition, the interface has the option of controlling the connected SMART-LINK module over the iDrive control panel. 3.2.3.1. SMART-LINK video and control connection Interface-box V5C-M636 FRONT V5C-UNI01 1 harness SMART-LINK CarPlay® android auto® +12V switching output 2 Power Out 1 (max. 1A) 3 SMART-LINK (optional) STA-UART (optional) 1 Connect the video RCA of the SMART-LINK module to the female RCA connector "FRONT CAM" of the interface box V5C-M636. 2 Connect the pink cable (+12V Power OUT 1) of the V5C-UNI01 harness to the +12V ACC power input of the SMART-LINK module. Configure in the OSD-menu "MISC", menu item "Power Out 1" the setting "CAN" (see also chapter "Configurable switching outputs"). 3 Connect the SMART-LINK interface control port "STA-UART" (available separately) to the "SMART-LINK CarPlay® Android Auto®" socket of V5C-UNI01 harness. Page13 Version 05.04.2024 V5-CIC-E-PNP 3.2.3.2. SMART-LINK audio connection 1 By using an audio cable (sold separately), connect the audio output of the SMARTLINK module to the vehicle AUX input. 3.2.3.3. Settings for SMART-LINK connecting You have to configure some settings in the OSD-menu INPUTS if you want to connect the SMART-LINK module (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu INPUTS Menu item FVC Setting OFF SmartPhone Explication No front camera/SMART-LINK connected Enables the " FRONT CAM" input and control for the SMART-LINK set Page14 Version 05.04.2024 V5-CIC-E-PNP 3.2.4. Configurable trigger outputs 1 You can configure the both +12V trigger outputs separately. The pink wire is POWER OUT 1 and the green wire is POWER OUT 2. Note: You can configure the both trigger outputs in the OSD-menu MISC separately (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu MISC Menu item POWER OUT1 (pink) POWER OUT2 (green) Setting CAN Ignition RearCam Explication +12V when the interface is on (red LED on) +12V when ignition is on +12V when the rear-view camera input is activated Reverse Gear +12V when reverse gear is engaged OFF Trigger putput deactivated Version 05.04.2024 V5-CIC-E-PNP Page15 3.3. Picture settings You can change the picture settings in the OSD-menu IMAGE (activation by long pressing the OPTION -button). Brightness Contrast Saturation Hue Sharpness Note: The picture settings will be retained for each AV-source separately. 3.4. Picture format settings The picture format can be changed in the SMART-LINK video level by long pressing the OPTION -button). - 8.8" and 10.2" 24:10 ultrawide monitor: -FULL = 24:10 video full screen mode -16:9 = 16:9 video in the center -AV+LVDS = 16:9 video on left side, factory picture on right side - 6.5" and 7" 16:9 monitor: -FULL = 16:9 video full screen mode -ZOOM = 16:9 video full screen mode - zoom Page16 Version 05.04.2024 V5-CIC-E-PNP 4. Operation 4.1. OSD On-screen display You can change the basic configurations of the interface in the OSD (on screen display). 4.1.1. OSD Operation You can control the OSD by iDrive. 4.1.1.1. 8-button iDrive Page17 Version 05.04.2024 V5-CIC-E-PNP 4.1.1.2. 2-button iDrive in Mini Options Long press = enter/ leave OSD Short press= leave OSD + back to the main menu OK Back + leaving OK OSD Options Options 4.1.2. OSD Additional setting options The following settings in the OSD-menus OSD and MISC can be configured over and above the described settings in this manual (Operation of the OSD: see chapter "OSD-Operation"): OSD-menu MISC Menu item H POSITION V POSITION VERSION FACTORY RESET Setting 0-xxx 0-xxx X.XX.XX Explication Horizontal position of the OSD Vertical position of the OSD Displays the current SW-version Resetting to factory settings Page18 Version 05.04.2024 V5-CIC-E-PNP 4.2. Video-in-motion function It is possible to activate and deactivate the video-in-motion in the OSD menu "MISC" (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu MISC Menu item VIM Setting ON OFF Explication Video-in-motion activated Video-in-motion deactivated For the V5-CIC-E-PNP the video-in-motion function is permanently active without disturbing the navigation performance. 4.3. Selecting the interface as current video-source In the vehicle's CD/Multimedia > External devices menu, activate AUX front by iDrive and after it long press CD-button to choose the interface as current video-source. Short press CD button to switch the video inputs. Each short press will switch to the next enabled input. If all inputs are enabled the order is: RVC à FVC/SmartPhone à... Inputs which are not enabled are skipped. The exiting of the video interface level is achieved by long press of CD button or short press of RADIO / MENU / TEL / NAV button. Note: Activation of the AUX level is not necessary for camera view. Version 05.04.2024 V5-CIC-E-PNP Page19 4.4. Controlling of the connected SMART-LINK module The picture shows which functions of the connected SMART-LINK module can be executed by iDrive control panel. Once the FVC/SmartPhone input is activated the iDrive control panel action will execute the function described in the picture. Page20 Version 05.04.2024 V5-CIC-E-PNP 5. Specifications Operation voltage 10.5 14.8V DC Stand-by power drain <0,1mA Operation power drain 190mA Power consumption 2,6W Temperature range -20°C to +80°C Weight (box only) 285g Measurements (box only) B x H x T 141 x 30 x 105 mm 6. Connections (interface-box) Interface)box V5C)M636 REAR Male74pin7HSD7 LVDS7connector Male712pin7AMP7 connector Male74pin7HSD7 LVDS7connector Front7camera input Rear)view7 camera input Interface)box V5C)M636 FRONT Female update)connector Mini7USB 7. Technical Support CAS GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@casgermany.com Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Page21 Version 05.04.2024 V5-CIC-E-PNPmacOS Version 13.5 (Build 22G74) Quartz PDFContext