Hama MyVoice2100 Bluetooth Mono Headset

Charging the Headset

Place the headset into the charging cradle. Connect the cradle to a power source using the provided micro USB cable.

The headset indicates charging status:

• Charging: Red indicator light.
• Fully Charged: Blue indicator light.

A full charge takes approximately 2 hours.

Pairing with a Device

To connect your headset to a smartphone or other Bluetooth-enabled device:

1. Ensure the headset is powered off.
2. Press and hold the power button until the indicator light flashes red and blue, indicating it is in pairing mode. The headset may announce "Pairing".
3. On your device, turn on Bluetooth.
4. Select "Hama MyVoice2100" from the list of available devices.
5. If prompted, enter the password "0000".
6. Once paired, the indicator light will typically turn blue or turn off, and the headset may announce "Connected".

Powering On/Off

• Power On: Press and hold the power button until you hear "Power on".
• Power Off: Press and hold the power button until you hear "Power off".

Voice Assistant Activation

To activate Siri or Google Assistant:

• Press and hold the headset button for 1 second.

Call Management

• Answer/End Call: Press the headset button once (1x).
• Reject Incoming Call: Press the headset button twice (2x).
• Redial Last Number: Press the headset button twice (2x).

Music Playback

• Play/Pause Music: Press the headset button once (1x).
• Next Track: Press the headset button twice (2x).
• Previous Track: Press the headset button three times (3x).

Volume Control

• Volume Up: Press the '+' button once (1x).
• Volume Down: Press the '-' button once (1x).