IC-GM1600 VHF Transceiver SAR Measurement Data
Model: IC-GM1600
FCC ID: AFJ279521
Test Laboratory: Ultratech Group of Labs
File Reference: ICOM-436Q-SAR
Exhibit 1: Prescan Measurement Summary
| Configuration | Antenna | CH | CH. Freq (MHz) | Head SAR1g (W/Kg) | Head SAR10g (W/Kg) | Body SAR1g (W/Kg) | Body SAR10g (W/Kg) |
|---|---|---|---|---|---|---|---|
| MB-133 with Batteries | FA-S61V | 77 | 156.875 | 0.22 | 0.17 | ||
| BP-234 | FA-S61V | 77 | 156.875 | 0.22 | 0.17 | ||
| BP-252 | FA-S61V | 77 | 156.875 | 0.22 | 0.17 | ||
| BP-252 with Belt Clip | FA-S61V | 77 | 156.875 | 0.22 | 0.16 | ||
| MB-103Y | FA-S61V | 77 | 156.875 | 0.22 | 0.16 | ||
| MB-86 | FA-S61V | 77 | 156.875 | 0.21 | 0.17 |
Exhibit 1: Head SAR Measurements
The following details the Head SAR measurements performed using the DASY5 system.
Test Case: ICOM-436Q BP-252 156.875MHZ.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.875 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.875 MHz; σ = 0.793 S/m; εr = 53.339; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.57, 7.57, 7.57); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.248 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.63 V/m; Power Drift = -0.07 dB. Peak SAR (extrapolated) = 0.314 W/kg. SAR(1 g) = 0.221 W/kg; SAR(10 g) = 0.168 W/kg. Maximum SAR (measured) = 0.246 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.248 W/kg) down to -11.33 dB (representing -6.05 dBW/kg).
Test Case: ICOM-436Q BP-234 156.875MHZ.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.875 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.875 MHz; σ = 0.793 S/m; εr = 53.339; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.57, 7.57, 7.57); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.258 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 15.80 V/m; Power Drift = -0.16 dB. Peak SAR (extrapolated) = 0.317 W/kg. SAR(1 g) = 0.224 W/kg; SAR(10 g) = 0.172 W/kg. Maximum SAR (measured) = 0.248 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.258 W/kg) down to -12.31 dB (representing -5.88 dBW/kg).
Test Case: ICOM-436Q BP-234 156.600 MHZ.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.6 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.6 MHz; σ = 0.792 S/m; εr = 53.337; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.57, 7.57, 7.57); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.250 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.03 V/m; Power Drift = -0.12 dB. Peak SAR (extrapolated) = 0.309 W/kg. SAR(1 g) = 0.220 W/kg; SAR(10 g) = 0.170 W/kg. Maximum SAR (measured) = 0.243 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.250 W/kg) down to -12.32 dB (representing -6.02 dBW/kg).
Test Case: ICOM-436Q BP-234 156.300 MHZ.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.3 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.3 MHz; σ = 0.792 S/m; εr = 53.334; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.57, 7.57, 7.57); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.267 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 15.94 V/m; Power Drift = 0.05 dB. Peak SAR (extrapolated) = 0.337 W/kg. SAR(1 g) = 0.240 W/kg; SAR(10 g) = 0.184 W/kg. Maximum SAR (measured) = 0.265 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.267 W/kg) down to -13.18 dB (representing -5.74 dBW/kg).
Exhibit 2: Body SAR Measurements
The following details the Body SAR measurements performed using the DASY5 system.
Test Case: ICOM-436Q BP-234 156.8750MHZ MB-103Y.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.875 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.875 MHz; σ = 0.835 S/m; εr = 61.223; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.18, 7.18, 7.18); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.253 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.90 V/m; Power Drift = -0.00 dB. Peak SAR (extrapolated) = 0.356 W/kg. SAR(1 g) = 0.222 W/kg; SAR(10 g) = 0.162 W/kg. Maximum SAR (measured) = 0.252 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.253 W/kg) down to -13.04 dB (representing -5.96 dBW/kg).
Test Case: ICOM-436Q BP-234 156.8750MHZ MB-86.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.875 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.875 MHz; σ = 0.835 S/m; εr = 61.223; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.18, 7.18, 7.18); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.235 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.16 V/m; Power Drift = 0.03 dB. Peak SAR (extrapolated) = 0.297 W/kg. SAR(1 g) = 0.213 W/kg; SAR(10 g) = 0.165 W/kg. Maximum SAR (measured) = 0.235 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.235 W/kg) down to -11.20 dB (representing -6.28 dBW/kg).
Test Case: ICOM-436Q BP-234 156.600MHZ MB-103Y.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.6 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.6 MHz; σ = 0.835 S/m; εr = 61.221; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.18, 7.18, 7.18); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.234 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.63 V/m; Power Drift = -0.07 dB. Peak SAR (extrapolated) = 0.309 W/kg. SAR(1 g) = 0.210 W/kg; SAR(10 g) = 0.159 W/kg. Maximum SAR (measured) = 0.235 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.234 W/kg) down to -11.48 dB (representing -6.31 dBW/kg).
Test Case: ICOM-436Q BP-234 156.300MHZ MB-103Y.DA52:0
DUT: IC-GM1600, Type: VHF Transceiver, Serial: 0000002
Communication System: UID 0, CW (0), Frequency: 156.3 MHz, Duty Cycle: 1:1
Medium Parameters: f = 156.3 MHz; σ = 0.835 S/m; εr = 61.219; ρ = 1000 kg/m³
Phantom Section: Flat Section; Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration: Probe: ES3DV3 - SN3250; ConvF(7.18, 7.18, 7.18); Calibrated: 3/22/2016; Sensor-Surface: 3mm (Mechanical Surface Detection); Electronics: DAE4 Sn874; Calibrated: 8/22/2016; Phantom: ELI 4.0; DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Area Scan: Interpolated grid: dx=1.500 mm, dy=1.500 mm. Maximum SAR (interpolated) = 0.248 W/kg.
Zoom Scan (5x5x7): Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm. Reference Value = 16.82 V/m; Power Drift = -0.02 dB. Peak SAR (extrapolated) = 0.354 W/kg. SAR(1 g) = 0.221 W/kg; SAR(10 g) = 0.161 W/kg. Maximum SAR (measured) = 0.249 W/kg.
The SAR distribution plot shows a localized high SAR area on the device. The color bar indicates the scale from 0 dB (representing 0.248 W/kg) down to -12.88 dB (representing -6.05 dBW/kg).
