COSTWAY JL10009 Massage Chair User Manual

Important Safety Information

This instruction booklet contains important safety information. Please read and keep for future reference.

Before You Start

Please read all instructions carefully before assembly and operation.

• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• Assemble all items near the intended use area to avoid unnecessary movement once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials away from babies and children due to potential choking hazards.

Product Overview

Thank you for purchasing this product. This manual provides instructions for correct operation and important safety warnings. Keep this manual for future reference.

Note: Costway reserves the right to revise the design and description of this product without further notice. Refer to the actual color of the product.

Contents

• Safety and maintenance
• Use safety warning
• Name of components
• Function
• Method of usage
• Product specification
• Features, maintenance and cleaning of microfiber leather
• Maintenance and cleaning of PU synthetic leather

Safety and Maintenance

1. Important Safety Warnings

• Do not allow children to touch any movable part of this product.
• Use a well-grounded power supply unit suitable for this product.
• Pull out the plug after use or before cleaning to avoid physical injury or product damage.
• Operate this product as instructed in this manual.
• Do not use any parts or accessories not recommended by the manufacturer.
• Do not use this product outdoors.
• Read the Operation Instructions carefully before operation.
• Never use this product for any other purpose not listed herein.
• 20 minutes of usage each time is recommended.
• Do not use this product if the leather, cover, or radiator hole is broken, damaged, covered, or blocked.
• Do not drop anything into this product.
• Never fall asleep while using this product.
• Do not use this product if you are drunk or feel unwell.
• Do not use this product within one hour after a meal.
• Do not use this product with excessive force to avoid injury.

2. Operating Environment

• Do not use this product in a very moist environment such as a bathroom.
• Stop using this product immediately when the ambient temperature changes sharply.
• Do not use this product in any heavily-dusty or caustic environment.
• Do not use this product in a small space or a place without good ventilation.

3. Populations Who Should Not Use This Product

• Patients with osteoporosis.
• Patients with heart disease or those wearing electronic medical devices such as a pacemaker.
• People who have a fever.
• Pregnant women or women on their menstrual period.
• Patients who are injured or have a skin disease.
• Unsupervised children under 14 and unconscious individuals are not allowed to use this product.
• People advised by physicians to rest or who feel unwell.
• People whose bodies are wet are forbidden to use this product.
• This product has a hot surface. Persons insensitive to heat must pay attention when using this product.

4. Safety Precautions

• Check whether voltage is consistent with the product's specification.
• Never insert or pull out the plug with a wet hand.
• Do not let water flow into this product to avoid electric shock or damage.
• Do not pull the power cord when plugging or unplugging it. Rough handling is forbidden.
• Do not damage the wire or modify the circuit of this product.
• Do not clean live parts of this product with a wet cloth, such as a power switch and plug.
• Stay away from this product in case of power failure to avoid injury if power is restored suddenly.

5. Product Service and Maintenance

• This product should be maintained only by the service center designated by the manufacturer. Users should not disassemble or maintain it without permission.
• Turn off the main power switch after usage.
• Do not use this product if the power socket becomes loose.
• If this product will be left unused for a long period, roll up the power cord and store it in a dry, dust-free environment.
• Do not store this product at high temperatures or near open flame. Avoid prolonged exposure to direct sunshine.
• Clean this product with a dry cloth. Never use thinner, benzene, or alcohol.
• The mechanical components are specially designed and manufactured, requiring no special maintenance.
• Do not use a sharp object to stab this product.
• Stop using this product at once if it works abnormally, and consult your local supplier.
• Stop using this product if you feel unwell, and consult your health care practitioner.
• This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by personnel responsible for their safety. Children should be supervised to ensure they do not play with this product.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified staff to avoid hazards.

6. Solutions to Ordinary Malfunctions

• Do not roll or pull this product on uneven ground. Lift it before moving.
• Use this product intermittently. Do not keep it working continuously for a long period.
• If the motor sounds during operation, this is normal.
• If the controller cannot work normally, check if the plug and power socket are reliably connected and if the power switch is turned on.
• If the rated working time is over, the product will automatically activate the power-off key. If it operates for a long period, the temperature protector will stop it automatically. The product can be used again after half an hour.

Use Safety Warning

Name of Components

The massage chair consists of the following main components:

1. Head cushion
2. 3D digital sound and Negative oxygen ion generator
3. Upper arm capsule assembly
4. Hand controller
5. Hand-controller storage bag
6. Quick armrest
7. USB charging interface
8. Arm bag assembly
9. Seat cushion
10. Leg rest
11. Footrest
12. Back cushion
13. Armrest
14. Side cover
15. Backrest cover
16. Drive box cover
17. Mobile pulley
18. Power cord and plug
19. Power cord plug
20. Fuse box
21. Power switch
22. Controller cable plug

The power input section includes the power switch, fuse box, and controller jack.

Function

This product is designed with a set of massage machines that move up and down, featuring a four-wheel drive and static design. Key functions include:

• Simulated Massage Techniques: Five techniques: Shiatsu, kneading, tapping, knocking, and synchronous kneading and tapping.
• Shoulder Detection: Automatic shoulder detection and positioning.
• Automatic Massage Functions: Soreness improvement, comfort, relaxation, quick press mode, upper half, and lower half automatic modes.
• Memory Storage: M1 and M2 memory storage functions.
• Manual Massage (Upper Half): Five position selections: full body, partial body, fixed point, upper body, lower body. Five simulation massages: Shiatsu, kneading, tapping, knocking, and synchronous kneading and tapping. Speed adjustable in three levels. Mechanical hand position adjustable in fixed point and partial body states. Massage ball width (big, medium, small) adjustable for slap, acupressure, and percussion massages.
• Pressure Massage: Full body, arm (4 sacs in upper arm, 8 sacs in arm), and leg (16 sacs in leg) pressure with three-level intensity.
• Leg Massage: Bottom roller massage function in the leg, two pairs of mastoid massage for toe roots, and scrape massage for feet and heels.
• Hyperthermia: Front-end hyperthermia function using plasma carbon fiber as a far-infrared heat source.
• Leg Frame Adjustment: Small leg frame has double-section non-level telescopic adjustment to adapt to different tibias.
• Sliding Rail Technology: Resting and picking sliding rail technology keeps the backrest away from the wall with zero space, maximizing space saving.
• Automatic Lying Mode: Adjusts lifting and lowering of the leg frame, backrest frame, and automatic lying mode.
• Curved Rail Technology: Backrest rail adopts curved curve rail technology, fitting the body's back curve for a close head-to-leg massage.
• Audio and Ion Generators: Upper arm has built-in 3D digital sound, connectable via Bluetooth to smart devices for music playback. Left and right upper arms are equipped with negative ion generators.
• Shortcut Keys: On the right hand, shortcut keys for on/off, zero weight, auto, linkage, etc.
• USB Charging: Upper right hand armrest includes a USB charging function.
• Headrest Cushion: Foldable design for two tibia sections (folded back into two layers). Sidewall layers can be adjusted to reduce neck and shoulder massage intensity. Unfold headrest to extend to the top, suitable for different people.

Method of Usage

Note: The specific display on the controller is subject to the actual product.

Controller Overview

The hand controller features an LCD screen displaying all massage function diagrams. Key buttons and their functions include:

• Power Switch: Turns on/off all massage functions.
• Adjust Shoulder: Manually adjusts the position of the shoulders and massage acupressure points.
• Adjust Leg: Adjusts the leg rest up or down.
• Foot Roller Massage: Turns on/off and adjusts the speed of the bottom foot roller massage (three speeds).
• Air Pressure: Turns on/off pressure massage function (full body, arm, leg pressure modes).
• Air Intensity: Adjusts the pressure intensity (three adjustable intensity selections).
• Heater: Turns on/off the heating massage function (far-infrared hyperthermia on the back, warms after 3 minutes).
• NAI (Negative Oxygen Ionization): Press for 3 seconds to turn on or off the negative oxygen ionization function.
• Auto Lying: Switches between three automatic lying modes.
• Backrest Adjustment: Adjusts the backrest frame to rise or fall.
• Auto Mode Buttons: Ache relieve, Comfort, Relax, Demo, Upper body/M1, Lower body/M2.
• Manual Mode Buttons: Speed, Width, Back stretch.

1. Power on the Whole Machine

Connect the power plug to the power input. Turn on the power switch (located near the fuse box and controller jack).

2. Start Massage

1. Press the power key to automatically lie down and start the massage.
2. The chair will automatically detect body shoulder position and massage points. Wait for detection to complete.
3. If there is a deviation between the detected and actual shoulder position, adjust the shoulder position up or down to the suitable position. There are 10 shoulder positions. If no adjustment is made within 10 seconds, the massage function will automatically start.

Adjust Shoulder Key:

• Pressing the "Adjust shoulder" key upwards moves the massage ball upwards to a suitable shoulder position.
• Pressing the "Adjust shoulder" key downwards moves the massage ball downwards to a suitable shoulder position.

4. Select Massage Function

Memory Function Massage:

Select "Upper body/M1" or "Lower body/M2" mode. Press for 3 seconds to enter the previously stored M1 or M2 function, returning to the saved massage setting state.

Specially Automatic Massage:

Manual Massage of the Upper Body:

Air Pressure Massage:

Other Manual Functions:

Other Manual Functions (Continued):

Quick Armrest Key:

3. Turn off the Power and End the Massage

1. During massage, pressing the power switch button immediately turns off all massage functions, and the chair back and foot pads reset. The current settings can be stored by memory function. When massage time is up, all functions turn off immediately, and memory can be stored, but the chair back and foot pads do not reset.
2. Memory function storage: When the display screen "Memory" flashes, press the M1 or M2 memory key to store the massage selection statistics before the end of the massage.
3. Cut off the power supply of the whole machine. This is indicated by unplugging the power supply.

Installation Guide

4. Armrest Installation

1. Locate the connecting plug for the armrest at the bottom of the seat frame and pass it out from the middle of the rear end of the seat frame. (Illustrated as Figure 1: plug emerging from seat frame).
2. After passing the connecting plug, connect it to the corresponding wiring plugs, matching marks on the wiring pairs. (Illustrated as Figure 2: connecting wires).
3. Firmly insert the joints drawn from the bottom of the seat frame into the armrest joints, and ensure pipe joints are also inserted. (Illustrated as Figure 3: joints inserted).
4. After connecting wires, gently guide the steel pipe in the middle of the seat frame into the bottom of the seat frame. Pull the cloth cover well, taking care not to break the tube. (Illustrated as Figure 4: inserting steel pipe and pulling cloth cover).
5. Hold the front and rear ends of the armrest. First, position the rear end of the armrest close to the lower end of the capsule. (Illustrated as Figure 5: armrest positioned).
6. Then, insert the limit shaft of the armrest into the limit block of the space capsule. (Illustrated as Figure 6: limit shaft inserted).
7. After inserting the rear end, move the front end of the armrest close to the steel frame and hook the front end into the steel pipe of the seat frame. (Illustrated as Figure 7: hooking armrest).
8. After hanging up, press down on the armrest to secure it in place, then push up the front end. Ensure the hook at the front end is close to the steel pipe. Lightly shake the armrest to check if both ends are in place. (Illustrated as Figure 8: securing armrest).
9. Unzip the upper arm sleeve. Use a cross-head screw to fix screws through the hole of the space capsule, tightening it with the armrest. Then zip the upper arm cover. (Illustrated as Figure 9: screwing armrest).
10. Align the mounting holes on the armrest. Use cross-head screws to tighten and fix them on the armrest. The armrest installation is complete. Repeat for the other armrest. (Illustrated as Figure 10: final armrest attachment).

5. The Calf Installation

1. Place the rotating shaft onto the fixed shaft of the calf, ensuring alignment of the hole position for easy disassembly and assembly of the R-shaped pin. (Illustrated as Figure 1: rotating shaft on fixed shaft).
2. Align one end of the lower leg with the fixed shaft and insert it. (Illustrated as Figure 2: inserting lower leg).
3. Insert the R-shaped pin. Move the calf to the other side and insert the R-shaped pin. (Illustrated as Figure 3: inserting R-shaped pin).
4. The installation of the calf is completed. (Illustrated as Figure 4: completed calf installation).

6. Head Cushion and Backrest Pad's Dismounting and Use Manual

Using head cushions can reduce kneading massage intensity on the neck and shoulder. Decide whether to use head cushions based on your needs (head cushions are recommended).

• Backrest cushion and backrest are connected by a zipper. (Illustrated as Figure 1: zipper connection).
• Head cushions and backrest pad are connected by thread gluing. (Illustrated as Figure 2: thread gluing connection).

7. Floor Protection

Heavy massage chairs may damage wood floors. Place a carpet or other protective object underneath to prevent damage. (Illustrated as a chair on a carpet).

8. Method of Movement

Caution: Do not move the chairs with their wheels on wood floors, rough ground, or in narrow spaces. Two people are required to lift the chair. During lifting, use the calf rest end sealing plate and backrest cover grooves as force-bearing points. Do not lift the armrest directly.

Ensure all wires are far above the ground. Tilt the backrest backward to a certain degree (with the gravity center resting on the wheels). Push the chair forward or backward with your hands, then slowly and gently return it to the normal position.

Note: During movement, turn off the power first, then unplug the power cord and the controller cord.

Warning: Massage chair rear wheels are only suitable for short-distance movement. For long distances, use other assistive tools to move the massage chair.

Product Specification

Material Introduction

The massage chair is constructed from PVC, PA, steel parts, and electric & electron parts.

Features, Maintenance and Cleaning of Microfiber Leather

Microfiber, also known as "ultra fine fiber reinforced PU" or refinish, is a high-grade leather with excellent wear resistance, permeability, chemical resistance, softness, comfort, flexibility, and a texture similar to real leather. It is abrasion resistant, cold resistant, and texture resistant, making it an ideal choice.

Maintenance Method:

1. Keep in a place with circulated air.
2. Do NOT expose to violent sunlight.
3. If the surface is wet, clean immediately with a cloth and place in a cool, dry place.
4. Evenly wipe smudges or other traces with a cloth, avoiding water leakage.
5. Regularly use a small amount of care solution to wipe the surface to regain its luster.

Cleaning Method:

1. Clean with water and detergent; avoid gasoline scrubbing.
2. Cannot be washed.
3. Wash only in water, not exceeding 40 degrees Celsius / 104 Fahrenheit.
4. Cannot be exposed to sunlight.
5. Do not touch organic solvents.
6. PU needs to be stored in a bag and cannot be folded.

Maintenance and Cleaning of PU Synthetic Leather

PU synthetic leather, made of polyurethane, offers better acid and alkali resistance, heat resistance, and sunlight resistance compared to other materials. Avoid placing it in dusty, high temperature, high humidity, and low temperature environments. Strong light exposure and environments with acid and alkali chemicals can cause cracking and accelerate deterioration.

Cleaning for PU Synthetic Leather:

1. Do not use organic reagents, grease solutions, compounds, especially strong solvents, as they can corrode the PU surface.
2. Do not use clean water or washing powder to scrub the PU surface, as it can cause cracks.
3. Select cleaners with a pH value of 5-7, no abrasives, and environmentally friendly.
4. For dirty PU surfaces, wipe with a soft cloth; avoid cleaning with a brush.

Maintenance for PU Synthetic Leather:

1. Ensure indoor communication (ventilation); too dry or damp conditions will accelerate deterioration.
2. Do not place the leather where the sun can reach it directly or where the air conditioner blows directly, as it will damage the floor and cause color fading.
3. High temperature and humidity can cause chemical reactions with the leather, leading to peculiar smells. Wipe frequently with a slightly damp soft cloth.
4. When wiping the sofa, do not use alkaline cleaning fluid. Acidic treatment is used during preparation, and alkalinity will reduce paper flexibility, causing damage and cracks over long-term use.

Customer Information

Costway encourages customers to visit their website for quality products and an easy shopping experience, good products, and efficient service.

US office: Fontana, California

UK office: Ipswich

Benefits of following Costway:

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

Costway extends heartfelt thanks to all customers for assembling this product and providing valuable feedback.