GVM-PR150D Photography Light

Important Safety Instructions

This product is professional lighting and staging equipment and should only be operated by a qualified lighting technician or used under the supervision of a professional. Always follow the precautions below to ensure safe and proper usage.

• Read the product manual carefully before use.
• Suitable for use in a temperature range of -10°C to 40°C.
• Do not place near flammable and volatile solvents.
• Ensure the device has cooled down completely before storing and unplug the power cord. Store in its carrying case or a well-ventilated and dry place.
• This lighting fixture is not for general illumination and should not be used as such. Individuals with eye injuries or sensitivity should avoid using it.
• This is a professional light and children are prohibited from using it. Close supervision of children is required.
• Remove the protective cover before use.
• Do not stare directly at the light source when the fixture is on. Avoid prolonged exposure to high-intensity light. If discomfort occurs, turn off the fixture and seek medical attention.
• Use caution when the fixture is on to avoid contact with high-temperature components like LED light sources.
• Do not use damaged equipment or accessories. Seek professional repair.
• If the light source is damaged or deformed due to heat, stop use and contact the manufacturer or a qualified repairman.
• If the product is cracked due to falling, squeezing, or strong impact, stop use to avoid electric shock.
• Do not disassemble the product. Malfunctions must be checked and repaired by the manufacturer or authorized personnel.
• Unplug the power supply before cleaning and maintenance. Pull the plug, not the cable. Use only with earthed power outlets or emergency power generators.
• Clean with a dry, soft cloth. Do not use a wet cloth.
• If an extension cord is required, ensure it has the necessary capacity to power the unit to avoid overheating.
• Properly place power cords to avoid damage or tripping hazards. Use original power cords. Damage from non-original cords is not covered.
• Do not use accessories not recommended by the brand.
• For products with batteries, use only specified batteries and accessories. Keep batteries out of reach of children. Remove leaking or damaged batteries immediately. Do not modify or disassemble batteries.
• For products with built-in lithium batteries, use a dedicated charger and follow operating instructions.
• The warranty lasts for one year. Consumables like batteries and adapters are not covered.
• The one-year warranty is invalidated by private repairs.
• Malfunctions caused by non-standard operations are not covered by the warranty.
• Safety instructions are based on factory testing. GVM reserves the right to change designs and specifications without notice. Visit the official website for the latest version.

WARNING

• High-power LED lights are strictly prohibited from being directly viewed or shining into other people's eyes.
• Do not unplug the power cord or connecting wires while the light is on.
• Do not cover the heat dissipation port when the lamp is in operation.
• Keep children away from touching or using this light.
• Operate correctly according to the user manual.

Product Introduction

The GVM-PR150D features steplessly adjustable lighting effects with brightness and color temperature control (2700K~7500K). It uses a CRI97+ COB lamp bead for natural and vivid shooting effects. It includes an App intelligent control system, an LCD display, and supports 360° rotation. It can also simulate 8 kinds of scene lights (Lightning, Flash, Candlelight, TV, Bad Bulb, Explosion, Fireworks, Paparazzi) when controlled by the APP or the GVM-YK22 remote control (sold separately).

Disclaimers

Read instructions and warnings carefully to ensure correct operation. Failure to do so may cause harm or product damage. By using this product, you acknowledge and agree to the terms and conditions, taking full responsibility for its use. Design and specifications are subject to change without notice.

Product Parameter

• Brand: GVM
• Product Model: GVM-PR150D
• Product Name: Photography Lights
• Product Type: Photography Fill Light
• Functions/Features: APP (Bluetooth Connection), New LCD Screen, Joint Control, High Display COB Lamp Beads, Multi-Scene Mode.
• Bluetooth Controllable Distance: ≤ 50M
• RF Controllable Distance: ≤ 50M
• Light Adjustment Method: Stepless Adjustment
• Color Rendering Index: ≥ 97
• Color Temperature: 2700K - 7500K
• Illuminance: 5910lux@1m, 23100lux@0.5m
• Power: 150W
• Product Weight: 1.5KG
• Product Size (mm): 220 x 160 x 290
• Lamp Beads Quantity: COB x 1
• Power Supply Mode: DC Input
• Power Supply: DC 30V/5A
• Voltage: AC 100 - 240V
• Cooling: Fan Forced Cooling
• Product Material: Aluminum Alloy + Plastic
• Commodity Origin: Huizhou, China

Precautions

• Use the matching power adapter with the same specifications.
• The product is not waterproof; use in a rainproof environment.
• The product is not anti-corrosion; avoid contact with corrosive liquids.
• Ensure the product is firmly placed to prevent falling and damage.
• Switch off the power when not in use for a long time.

Product Structure Diagram

The GVM-PR150D features a U-frame, angle fixing handle, lamp holder interface, buckle, vents, Bowens mount, COB lamp bead, and diffuser mount. The rear panel includes a power input port, ON/OFF switch, brightness adjustment knob, compound knob, mode button, and LCD display.

Key Controls:

• 1. Power input interface: Connects to the power supply.
• 2. Switch ON/OFF: Powers the device on or off.
• 3. Brightness adjustment knob: Adjusts light intensity.
• 4. Compound knob: Short press to switch parameters, turn to adjust selected parameter (e.g., color temperature, channel).
• 5. Mode button: Switches between Rotate, Master, Slave, and APP control modes.
• 6. LCD display: Shows current mode, brightness, color temperature, scene number, and channel value.

Installation Method

1. Mounting: Rotate the knob clockwise to install the light onto a bracket; counterclockwise to unload.
2. Diffuser Attachment: Insert the diffuser bayonet into the lamp bayonet and turn slightly clockwise.
3. Angle Adjustment: Loosen the angle fixing handle, adjust the spotlight angle, and tighten the handle.
4. Power Connection: Connect the power cord to the power input port.

Function Introduction & Instructions for Use

• LCD Screen: Displays brightness, control mode, light effect mode, parameters, scene number, and channel. Scene light functions are available via APP or GVM-YK22 remote control.
• Mode Types:
• Rotate Mode: Adjust brightness and color temperature using the knobs.
• Master Mode: Control brightness and color temperature via knobs; slaves on the same channel synchronize.
• Slave Mode: Set the same channel (CH) as the master light for synchronous control.
• APP Mode: Control via the GVM LED mobile application.
• Adjust Brightness (INTENSITY): Use the brightness adjustment knob (3) or the APP.
• Adjust Color Temperature (CCT): Long press the compound knob (4) for 2 seconds to switch to CCT mode, then rotate the knob. Alternatively, use the APP.
• Adjust CH (Channel): Rotate the compound knob (4) in Slave/APP mode, or set via the APP.
• Adjust Scene (SC): Scene light functions (8 types: Lightning, Flash, Candlelight, TV, Bad Bulb, Explosion, Fireworks, Paparazzi) are available via APP or GVM-YK22 remote control.

APP Control

1. Scan the QR code to download the GVM LED APP.
2. Turn on the light, switch to APP mode. Ensure phone Bluetooth and APP permissions (including GPS/positioning for Android) are enabled.
3. Open the GVM LED app, search for and connect to the Bluetooth device named "BT_LED".
4. Upon successful connection, you can control the light via the app. If a slave unit is present on the same channel, it will be controlled synchronously.
5. Note: Do not pair via system Bluetooth; use the app for connection.
6. Custom Scenes: Save up to 6 custom light effects in "My Scenes" by tapping the save icon and confirming.

Use and Preservation

• Avoid high humidity, strong electromagnetic fields, direct sunlight, and high-temperature environments.
• Disconnect power when not in use for extended periods.
• Cleaning: Disconnect power and use a damp cloth. Avoid detergents.
• Power: Ensure power is within the specified range.
• Repair: Do not unpack the product. Contact GVM support for faults.
• Accessories: Use manufacturer-provided or approved accessories.
• Warranty: Do not modify the product to retain warranty rights.

Quick Troubleshooting

Packing List

Product Warranty

This warranty card is proof for warranty service. Please fill it out with the salesperson and keep it properly.

Warranty Information:

Note: This form requires the salesperson's stamp.

Applicable Products:

This document applies to products listed in the "Product Warranty Information". Other products or components not covered by this scope are not included.

Warranty Period:

The warranty period starts from the first day of purchase, as indicated on the warranty card.

How to Obtain Warranty Service:

Contact the product salesperson, authorized service agency, or GVM's aftersales service hotline. Provide a valid warranty card for service. Without a warranty card, service may be provided if products are confirmed within the warranty scope, but it is not obligatory.

Cases where warranty does not apply:

• Exceeding the warranty period.
• Malfunctions or damages from incorrect use, maintenance, storage, improper handling, external forces, or exposure to inappropriate environments.
• Malfunctions or damages from unauthorized installation, repair, modification, or disassembly.
• Changes or removals of original identification information.
• Lack of a valid warranty card.
• Malfunctions or damages from unauthorized software.
• Malfunctions or damages from force majeure or accidents.
• Malfunctions or damages not caused by product quality issues.
• Normal wear and tear, fading, or consumption during use.

Product Warranty and Service Support Information:

Contact Information

GVM Official website: www.gvmled.com

Email:

• B&H Email: bh@gvmled.com
• GVM Email: support@gvmled.com
• Amazon Email: amazonsupport@gvmled.com

Warehouse Address: 12285 MCNULTY RD, STE 105 PHILADELPHIA, Pennsylvania 19154, USA

Manufacturer: Huizhou Latu Film Equipment Co., Ltd.