Form No. 3463-749 Rev A
Power Max® e26 60V Snowthrower
Model No. 39926—Serial No. 415000000 and Up
Register at www.Toro.com. Original Instructions (EN)
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part.
This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Contents
- Main Frame and Auger Housing Assembly - Page 4
- Pulley and Bellcrank Assembly - Page 6
- Impeller Drive Assembly - Page 8
- Drive Assembly - Page 10
- Transmission Assembly - Page 12
- Gearbox, Auger and Impeller Assembly - Page 14
- 26 Inch Auger Gearcase Assembly No. 119-7641 - Page 16
- Impeller Assembly - Page 18
- Powerhead, Pulley and Belt Assembly - Page 20
- 60 Volt Powerhead Assembly No. 139-5315 - Page 22
- Chute Assembly - Page 24
- Chute Control Assembly - Page 26
- Handle Assembly - Page 28
- Attachments and Accessories - Page 30
Main Frame and Auger Housing Assembly
This diagram displays an exploded view of the Main Frame and Auger Housing Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 46-8091 | 6 | Screw-HWH |
| 2 | 52-2861 | 4 | Washer |
| 3 | 94-2413 | 4 | Nut-U |
| 4 | 106-4588-01 | 2 | Skid |
| 5 | 114-3751 | 1 | Screw-HWH, Plastite |
| 7 | 138-3608 | 1 | Guide-Chute |
| 8 | 120-3872-01 | 1 | Scraper-26 Inch |
| 9 | 120-7158-01 | 1 | Cover-Liner |
| 10 | 120-7159 | 1 | Cover |
| 11 | 120-7161-01 | 1 | Brace-Frame |
| 13 | 120-7177 | 1 | Cover-Belt |
| 14 | 120-7178 | 1 | Cover-Lower |
| 16 | 120-7181 | 1 | Seal-Housing, LH |
| 17 | 147-9471 | 1 | Frame ASM |
| 18 | 139-5270 | 1 | Brace-Frame |
| 21 | 3230-18 | 5 | Screw-CARR |
| 22 | 3234-29 | 4 | Screw-HHF |
| 23 | 3296-29 | 4 | Nut-Lock, NI |
| 24 | 3296-47 | 5 | Nut-Lock,NI |
| 25 | 32144-85 | 17 | Screw-HWH Thd Form |
| 28 | 121-6841 | 1 | Seal-Housing, RH |
| 30 | 3230-23 | 4 | Bolt-CARR |
| 32 | 137-3410-03 | 1 | Bracket-Post, Chute |
| 33 | 120-9678 | 2 | Screw-HHF |
| 34 | 137-3094 | 2 | Nut-Hex |
Pulley and Bellcrank Assembly
This diagram displays an exploded view of the Pulley and Bellcrank Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 3-4244 | 1 | Pulley-Idler |
| 2 | 92-9698 | 1 | Screw-Shoulder |
| 3 | 38-7820 | 2 | Bearing-Ball |
| 4 | 25-5640 | 1 | Washer |
| 5 | 117-7711 | 1 | Bushing-Idler |
| 6 | 119-7645 | 1 | Plate-Wheel, Friction |
| 7 | 136-7152 | 1 | Traction Pulley ASM |
| 8 | 136-7124 | 1 | Retainer-Bearing |
| 9 | 119-7670-03 | 1 | Bellcrank-Drive |
| 10 | 136-7153 | 1 | Spring-Extension |
| 11 | 119-7679 | 1 | Bracket-Plate, Traction |
| 12 | 120-3883 | 1 | Spring-Extension |
| 13 | 137-3435 | 1 | Spring-Extension |
| 14 | 120-7156 | 2 | Bushing-Plate, Traction |
| 15 | 120-7165-03 | 1 | Bracket-Bellcrank |
| 16 | 136-7155 | 1 | Link-Drive |
| 17 | 120-9271 | 2 | Bracket-Anchor, Spring |
| 18 | 136-7159 | 1 | Arm-Idler, Traction |
| 19 | 120-9275 | 1 | Spring-Extension |
| 20 | 256-257 | 2 | Bushing-Nyliner |
| 21 | 323-29 | 1 | Screw-HH |
| 22 | 3230-10 | 1 | Bolt-CARR |
| 23 | 3296-29 | 1 | Nut-Lock, NI |
| 24 | 3296-59 | 1 | Nut-Lock, NI |
| 25 | 3296-73 | 1 | Nut-Lock, NI |
| 26 | 32144-85 | 7 | Screw-HWH Thd Form |
| 27 | 104-8301 | 1 | Nut-HF, NI |
| 28 | 3256-24 | 1 | Washer-Plain |
Impeller Drive Assembly
This diagram displays an exploded view of the Impeller Drive Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 3-4244 | 1 | Pulley-Idler |
| 2 | 66-8060 | 1 | Pad-Brake |
| 3 | 136-8674 | 1 | Bolt-Pivot, Eccentric |
| 4 | 120-7167 | 1 | Bushing-Rod, Clutch |
| 5 | 120-9254-03 | 1 | Impeller Clutch ASM |
| 6 | 120-9256 | 1 | Pivot-Brake, Impeller |
| 7 | 120-9257-03 | 1 | Arm-Brake, Impeller |
| 8 | 120-9276 | 1 | Eccentric-Brake, Impeller |
| 9 | 323-29 | 1 | Screw-HH |
| 10 | 3296-42 | 1 | Nut-Lock, NI |
| 11 | 3296-59 | 1 | Nut-Lock, NI |
| 12 | 32144-85 | 3 | Screw-HWH Thd Form |
| 13 | 104-0858 | 1 | Bolt-Shoulder |
| 14 | 137-3016 | 1 | Nut-HF |
Drive Assembly
This diagram displays an exploded view of the Drive Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 2 | 119-1567 | 1 | Wheel-Friction |
| 4 | 120-7950 | 3 | Screw-Torx |
| 6 | 140-3745 | 1 | Shaft-Hex |
| 7 | 119-7616 | 1 | Gear-Pinion, 8 Tooth |
| 8 | 121-6835 | 3 | Bearing-Ball |
| 9 | 119-7630 | 1 | Trunnion |
| 10 | 119-7684 | 1 | Spacer-Plate, Shift |
| 11 | 120-7162 | 2 | Bushing-Axle |
| 13 | 120-7191 | 1 | Retainer-Plate, Shift |
| 14 | 120-7193-03 | 1 | Shift Plate ASM |
| 15 | 136-7158 | 2 | Retainer-Bearing |
| 20 | 3296-56 | 4 | Nut-Lock, NI |
| 21 | 32121-9 | 1 | Pin-Roll, Slotted |
| 22 | 32144-85 | 6 | Screw-HWH Thd Form |
| 23 | 32144-86 | 1 | Screw-HWHTF |
| 24 | 121-6840 | 2 | Washer-Rubber |
| 25 | 145-0743 | 1 | Washer-Flat |
Transmission Assembly
This diagram displays an exploded view of the Transmission Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 2 | 140-3747 | 1 | Transmission-Gt, Di200 |
| 8 | 140-3746 | 1 | Axle-Lt, Cts |
| 9 | 140-3742 | 1 | Axle-Rt, Cts |
| 10 | 138-3660 | 1 | LH Wheel And Tire ASM |
| 10:1 | 138-3669 | 1 | Wheel (15X4 Tire) |
| 10:2 | 232-27 | 1 | Stem-Valve |
| 10:3 | 138-3668 | 1 | Tire |
| 11 | 138-3659 | 1 | RH Wheel And Tire ASM |
| 11:1 | 138-3669 | 1 | Wheel (15X4 Tire) |
| 11:2 | 232-27 | 1 | Stem-Valve |
| 11:3 | 138-3668 | 1 | Tire |
| 12 | 3290-343 | 1 | Pin-Hair |
| 14 | 3-8664 | 2 | Washer-Thrust |
| 15 | 107-3039 | 2 | Pin-Lynch |
Gearbox, Auger and Impeller Assembly
This diagram displays an exploded view of the Gearbox, Auger and Impeller Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 2 | 119-7612-03 | 1 | Impeller ASM |
| 3 | 119-7641 | 1 | Gearcase ASM |
| 4 | 120-3860 | 2 | Bearing-Auger |
| 5 | 120-3862 | 2 | Washer-Thrust |
| 6 | 120-9287-03 | 1 | LH Auger ASM |
| 7 | 120-9290-03 | 1 | RH Auger ASM |
| 9 | 322-3 | 2 | Screw-HH |
| 10 | 3296-42 | 4 | Nut-Lock, NI |
| 11 | 321-10 | 4 | Screw-HH |
| 12 | 32144-70 | 4 | Screw-HWHTF |
26 Inch Auger Gearcase Assembly No. 119-7641
This diagram displays an exploded view of the 26 Inch Auger Gearcase Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 121-1209 | 1 | RH Auger Gearcase ASM |
| 1:2 | 121-6634 | 1 | Seal-Shaft |
| 1:3 | 120-9269 | 1 | Bushing-Sleeve |
| 2 | 119-7640 | 4 | Washer-Thrust |
| 3 | 119-7639 | 1 | Shaft-Output, Auger |
| 4 | 3257-5 | 1 | Key-Woodruff |
| 5 | 119-1576 | 1 | Gear-Helical, 20 Tooth |
| 6 | 119-7635 | 1 | Bushing-Input |
| 7 | 119-7636 | 1 | Collar-Thrust |
| 8 | 121-1234 | 1 | Shaft-Impeller, Rolled |
| 9 | 62-1150 | 1 | Bushing-Worm |
| 10 | 107-8899 | 1 | Pin-Dowel |
| 11 | 121-6634 | 1 | Seal-Shaft |
| 12 | 121-1210 | 1 | LH Auger Gearcase ASM |
| 12:2 | 121-6634 | 1 | Seal-Shaft |
| 12:3 | 120-9269 | 1 | Bushing-Sleeve |
| 13 | 121-6832 | 1 | Plug-Pipe, SQH |
| 14 | 108-4862 | 6 | Screw-HWH Thd Roll |
Impeller Assembly
This diagram displays an exploded view of the Impeller Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 26-6110 | 1 | Flange-Cup, Bearing |
| 2 | 26-6120 | 1 | Flange-Cup, Bearing |
| 3 | 136-7157 | 1 | Pulley-Impeller |
| 4 | 120-9264 | 1 | Hub-Impeller, Pulley |
| 5 | 120-9272 | 1 | Bearing |
| 6 | 121-1230 | 1 | Washer-Plain |
| 7 | 115-5142 | 1 | Screw-HHF |
| 8 | 3230-23 | 3 | Bolt-CARR |
| 9 | 3296-29 | 3 | Nut-Lock, NI |
| 10 | 119-7640 | 1 | Washer-Thrust |
Powerhead, Pulley and Belt Assembly
This diagram displays an exploded view of the Powerhead, Pulley and Belt Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 139-5315 | 1 | Powerhead-60V |
| 2 | 139-5299 | 1 | Guide-Belt |
| 3 | 114-9049 | 2 | Washer-Flat,Fender |
| 4 | 139-1700 | 2 | Screw-HWH, Thd Roll |
| 5 | 136-8683 | 4 | Nut-Lock |
| 6 | 137-3400 | 2 | Pulley-Engine, Traction |
| 7 | 120-9283 | 1 | Pulley-Auger, Rear |
| 8 | 120-9284 | 1 | Pulley-Auger, Front |
| 9 | 120-3892 | 1 | Belt-V |
| 10 | 120-3893 | 1 | Belt-V |
| 11 | 3256-4 | 1 | Washer-Flat |
| 12 | 3253-21 | 1 | Washer-Lock |
| 13 | 120-2302 | 1 | Screw-HH |
| 14 | 137-9449 | 2 | 60V Battery, 3P 7.5Ah |
| 15 | 137-9440 | 2 | Charger-60V |
60 Volt Powerhead Assembly No. 139-5315
This diagram displays an exploded view of the 60 Volt Powerhead Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 139-5316 | 1 | Motor Mount |
| 2 | 139-5317 | 1 | Housing-Motor |
| 3 | 139-5318 | 1 | Cover-Controller |
| 4 | 139-5320 | 1 | Door-Top |
| 5 | 139-5321 | 1 | Door-Bottom |
| 6 | 144-4121 | 2 | Pin-Battery Cover |
| 7 | 110-1758 | 2 | Ring-Retaining |
| 8 | 147-9461 | 1 | Motor Controller ASM-Powerhead |
| 9 | 139-5289 | 1 | Motor-60V, 2 Stage |
| 10 | 139-5322 | 1 | Fan-Fc |
| 11 | 139-5269 | 1 | Cover-Fan |
| 12 | 137-9435 | 3 | Battery Track Assembly |
| 13 | 94-4496 | 27 | Screw-PPH |
| 14 | 49-2040 | 4 | Screw-HWHTF |
| 15 | 3230-2 | 4 | Bolt-CARR |
| 16 | 104-8300 | 4 | Nut-HF, NI |
| 17 | 139-5319 | 1 | Bucket-Battery |
| 99 | 147-1755 | 1 | Key-60V 2 Stage Power Head |
Chute Assembly
This diagram displays an exploded view of the Chute Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 2 | 144-1640-03 | 1 | Support-Chute Weld ASM, Upper |
| 3 | 138-3606 | 1 | Mount-Gear, Face |
| 4 | 106-4471 | 1 | Gear-Face |
| 5 | 106-4422 | 1 | Spacer-Chute |
| 6 | 138-3611-01 | 1 | Chute |
| 7 | 106-4472 | 1 | Gear-Chute |
| 8 | 138-3615-01 | 1 | Deflector |
| 9 | 138-3612-01 | 1 | Bracket-Spring |
| 10 | 135-1929 | 3 | Bolt-CARR |
| 11 | 138-0719 | 3 | Nut-HF |
| 12 | 136-7191 | 1 | Clamp-Cable |
| 13 | 137-3043 | 1 | Screw-HWH |
| 14 | 106-4476 | 1 | Latch-Chute |
| 15 | 138-3607 | 1 | Anchor-Cable |
| 16 | 120-9698 | 2 | Bolt-CARR |
| 17 | 119-4040 | 2 | Nut-HF, NI |
| 18 | 136-7197 | 3 | Screw-Shoulder |
| 19 | 108-7315 | 1 | Spring-Torsion |
| 20 | 137-3088 | 3 | Nut-Hex |
| 21 | 137-3103 | 1 | Screw-Shoulder, HH |
| 22 | 137-3089 | 3 | Nut-Hex |
| 23 | 136-7199 | 1 | Bolt-Shoulder |
| 24 | 32144-4 | 2 | Screw-HWH |
| 25 | 138-3627 | 1 | Cover-Chute, Gear |
| 26 | 98-1375 | 1 | Screw-HWH |
| 27 | 138-0689 | 1 | Screw-PH |
| 28 | 138-3678 | 1 | Spacer |
| 29 | 137-3094 | 1 | Nut-Hex |
| 30 | 137-6198 | 1 | Decal-Danger |
| 31 | 138-3671 | 1 | Gasket-Deflector |
| 32 | 138-8493 | 1 | Spring-Chute, Upper |
| 33 | 144-1642-03 | 1 | Chute Support ASM [black] |
Chute Control Assembly
This diagram displays an exploded view of the Chute Control Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 138-0662 | 1 | Rod-Control, Chute |
| 2 | 138-0659 | 1 | Screw-Shoulder, HWH |
| 3 | 139-1552 | 1 | Chute Control Lever ASM |
| 5 | 105-9988 | 1 | Lever-Cable, Deflector |
| 6 | 106-7310 | 1 | Pawl-Latch |
| 7 | 137-3087 | 1 | Nut-Hex |
| 8 | 137-6238 | 1 | Trigger-Latch |
| 9 | 138-3672 | 1 | Cable-Control, Deflector |
| 10 | 105-9982 | 1 | Spring-Torsion |
| 11 | 138-0688 | 1 | Link-Latch |
| 12 | 137-6239 | 1 | Cap-Lever |
| 14 | 94-4496 | 8 | Screw-PPH |
| 15 | 136-6677 | 1 | Globe-Quickstick, RH |
| 16 | 136-6632 | 1 | Plate-Stiffner |
| 17 | 136-6678 | 1 | Globe-Quickstick, LH |
| 18 | 137-3056 | 3 | Bolt-CARR |
| 19 | 137-3094 | 3 | Nut-Hex |
| 20 | 144-1237 | 1 | Cable-Rotation, Chute |
| 21 | 138-0744 | 1 | Washer-Friction, Composite |
| 22 | 32144-85 | 1 | Screw-HWH Thd Form |
| 23 | 144-1236 | 1 | Rod-Chute |
Handle Assembly
This diagram displays an exploded view of the Handle Assembly, illustrating the arrangement of various components. Each part is identified by a reference number, which corresponds to the details provided in the table below.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 137-3094 | 2 | Nut-Hex |
| 2 | 145-0852 | 1 | Decal - Consol |
| 3 | 139-3587 | 1 | Support-Rod, Lower |
| 4 | 138-0670 | 1 | LED Light ASM |
| 5 | 136-7120 | 1 | Clamp-Light |
| 6 | 139-1699 | 2 | Washer-Flat |
| 7 | 127-5961-03 | 1 | Bracket-Light |
| 8 | 145-0899 | 1 | Harness-Wire, LED And Hand Warmers |
| 9 | 614249 | 3 | Tie-Cable |
| 10 | 3230-19 | 1 | Bolt-CARR |
| 11 | 137-3089 | 1 | Nut-Hex |
| 12 | 161-0972 | 1 | Cable-Auger |
| 13 | 147-7549-03 | 1 | Handle-Lower |
| 14 | 137-3052 | 4 | Screw-HH |
| 15 | 138-8401 | 12 | Nut-HF |
| 16 | 137-6206-03 | 1 | Handle-Upper, LH |
| 17 | 137-6207-03 | 1 | Handle-Upper, RH |
| 18 | 137-3107 | 8 | Screw-Handle |
| 19 | 137-3009 | 4 | Washer-Cup |
| 20 | 145-0665 | 1 | Control Panel Assembly |
| 20:2 | 137-6249 | 1 | Decal-Safety |
| 21 | 137-6178 | 1 | Cover-Quickstick |
| 22 | 137-3099 | 8 | Screw-Plastite, HWH |
| 23 | 145-4075-01 | 1 | Brace-Console |
| 24 | 137-6187-03 | 1 | Gate-Shift |
| 25 | 137-6188-03 | 1 | Bracket-Shift |
| 26 | 144-2827-03 | 1 | Selector-Speed |
| 27 | 115-1166 | 2 | Washer-Plain |
| 28 | 136-7193 | 1 | Trunnion-Rod |
| 29 | 137-3103 | 1 | Screw-Shoulder, HH |
| 30 | 137-3038 | 1 | Nut-HF |
| 31 | 136-7121 | 1 | Spring-Compression |
| 32 | 105-9999 | 1 | Knob-Shift, LH |
| 33 | 106-4423 | 1 | Knob-Shift, RH |
| 34 | 94-4496 | 1 | Screw-PPH |
| 35 | 145-0696 | 1 | Rod-Shift |
| 36 | 136-7161 | 1 | Spring-Lockout, Handle |
| 37 | 144-1343 | 1 | Rod-Lockout |
| 38 | 136-7162 | 1 | Spring-Return, Lever |
| 39 | 145-0660 | 3 | Screw-HSH,Spl |
| 40 | 98-3499 | 1 | Washer-Flat |
| 41 | 145-0687 | 1 | Screw-Shoulder |
| 44 | 144-1342 | 1 | Latch, Lockout |
| 46 | 145-0677-03 | 1 | Bracket-Interlock |
| 47 | 144-1347 | 1 | Lever-Control |
| 48 | 161-0988 | 1 | Cable-Traction |
| 49 | 137-3083 | 2 | Pin-Hair |
| 50 | 139-3588 | 1 | Support-Rod, Upper |
| 52 | 32180-030 | 1 | Clip-Tie |
| 53 | 110-3408 | 1 | Stick-Cleanout |
| 54 | 122-1124 | 1 | Switch-Rocker, On-None-Off (Heater) |
| 55 | 145-0871 | 1 | Auger Control ASM |
| 56 | 3290-271 | 4 | Rivet-Pop |
| 57 | 144-1341 | 1 | Cam-Lockout |
| 58 | 144-1604 | 2 | Grip-Heated |
| 59 | 145-0872-03 | 1 | Handle Saddle |
| 61 | 137-3093 | 1 | Nut-Hex |
| 62 | 140-3749 | 3 | Nut-Lock Rohs |
| 63 | 144-1345 | 1 | Plate-Spring |
Attachments and Accessories
For 39926 Power Max e26 60V Snowthrower
| Product Name | Model/Part |
|---|---|
| Weight Kit | 107-3815 |
| Snow Cab Kit | 127-5960 |
| Non-Marking Skid Kit | 38211 |
| Heavy-Duty Skid Kit | 38212 |
| Drift Breaker Kit | 38213 |
| Toro 2-Stage Cover | 490-7466 |
| Plain 2-Stage Cover | 490-7467 |
| 60V Battery Charger 2 AMP | 88602 |
| 60V Rapid Battery Charger 5.4 AMP | 88605 |
| 60V LI-ION Battery 6.0 AH | 88660 |
| 60V LI-ION Battery 7.5 AH | 88675 |
Lawn Mowers, Golf Equipment, Landscape Equipment, Irrigation | Toro
