CyraTok Tablet Photo Booth Series Instruction Manual

Product Overview

The CyraTok Tablet Photo Booth combines portability and advanced photo technology to provide users with a simple and interesting way to take and share photos. It is ideal for weddings, birthday parties, company events, or other social events, offering a unique shooting experience.

Composition

• Tablet Mounting Frame
• Metal handle
• Neck/Connector
• Colorful fill light
• Light bar
• Fixed the base

Product Specifications

Attention

• Input voltage is DC12V; other input voltages are not allowed.
• Overload is prohibited.
• Check accessories carefully upon receipt. Notify supplier immediately of any missing items.
• Do not dump the machine. Ensure it is used on flat ground to avoid instability.
• Children should use the product only with adult supervision.
• For any issues or concerns, contact customer support.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception—which can be determined by turning the equipment off and on—the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm from your body.

Declaration of Conformity

Nisong (Shenzhen) Information Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://cyratok.com/pages/eu-declaration-of-conformity.

The "CE" mark indicates that this product complies with European regulations for product safety, health requirements, and environmental protection.

This symbol indicates the separate collection of electrical and electronic devices that become industrial waste in EU countries. Please do not dispose of such devices in household waste. Please use the return and collection systems in your country for the disposal of these products.

Camera Interface

• Shutter Control Area
• Aspect Ratio
• Filters
• Beauty
• Standard Shooting Mode (Photo, Video)
• Collage Mode
• Lighting Control Module (Functionally aligned with iPad control panel)
• Capture Settings (Timer/Duration Configuration)

Collage Mode

Equipped with multiple collage templates, background, sticker, and frame.

iPad Control

iPad Control Interface

• Color Wheel Value (Lighting Switch)
• Color Modes (Standard: RGB/CT)
  • RGB Mode (3 Primary Colors)
  • CW Mode (Cool White)
  • CT Mode (Dual Color Temperature)
  • WW Mode (Warm White)
• Brightness Control
• Color Value Selection
• Rainbow Mode (Speed Adjustment)
• Music Mode (Sensitivity Adjustment)
• Device Settings

Device Settings

Reconnect

When needing to switch devices or experiencing connection issues, select this operation to reconnect. This connection method aligns with Point 3. Alternatively, reconnect through Profile > Switch Device > iPad Photo Booth.

Pixel Mapping

When RGB lighting displays incorrect colors, perform Pixel Mapping. Switch between the following six wiring sequences to achieve accurate lighting alignment.

(Visual description: A diagram showing six different RGB wiring sequences: RGB, RBG, GRB, GBR, BRG, BGR. Users are instructed to switch between these sequences to match the device display for correct R-G-B alignment.)

LED Count

When LED display is incomplete, adjust LED count by configuring the correct LED count value.

• Single ring lighting input: 120
• Continuous lighting input: 240

(Visual description: A diagram showing an interface to set the LED count, with a slider or input field ranging from 10 to 1000. Users should set the LED count according to the manual's specifications.)

Remote Control

• Pause
• AUTO (Automatic circulation)
• On/Off
• Brightness +/-
• Speed +/-
• Mode +/-
• Color Buttons (R, G, B, Y, C, M, W, V): Red light, Green light, Blue light, Yellow light, Cyan light, Purple light, White light, Custom color.
• Shut down after 1 hours / 2 hours
• Music mode (1/2/3)
• Meteor
• Snowflake
• Romantic
• Motion

Compatible Model

Frame 1: Supports 10.2 / 10.5 / 10.9 / 11-inch devices.

• 10.2-inch: iPad 7/8/9
• 10.5-inch: iPad Pro(10.5); iPad Air 3
• 10.9-inch: iPad Air 4 / 5; iPad 10
• 11-inch: iPad Pro 1/2/3/(M4); iPad Air (M2) / (M3); iPad (A16)
• Cotton size: 70mm*2, 105mm*4, 182mm*1

Frame 2: Supports 12.9 / 13-inch devices.

• 12.9-inch: iPad Pro 3/4/5/6
• 13-inch: iPad Pro (M4); iPad Air (M2) / (M3)
• Cotton size: 84mm*2, 117mm*4, 218mm*1

(Visual description for Frame 1 & 2: Diagrams showing the dimensions and compatible iPad models for each frame size.)

(Visual description for Frame 1 User Guide: Instructions to use foam strips to secure the tablet in the frame, with a note that foam padding is self-adhered.)

Adjustable Shooting Angle

Horizontal/vertical shooting can be switched freely, and the shooting angle can be adjusted.

(Visual description: Images illustrating vertical shooting, horizontal shooting, and an adjustable angle mechanism.)

APP User Manual

1. Download the APP

For iOS and Android system tablets, download the "CyraTok" APP by scanning the QR code.

(Visual description: A QR code labeled "CYRA TOK".)

2. Create your account and grant mobile permissions (Bluetooth, Camera, Microphone) to activate features.

3. Select matching hardware and connect via Bluetooth.

(Visual description: A sequence of mobile app screens showing device selection, including options for "360 PHOTO BOOTH" and "IPAD PHOTO BOOTH". It demonstrates selecting a device and connecting via Bluetooth.)

Important Notes:

• If the selected hardware fails to connect, pull down to refresh in the device selection window and retry.
• If the device remains undetectable, restart the app and power cycle the hardware (turn off and restart).
• If connection issues persist, it may be due to Bluetooth permissions not granted during initial app installation. Reinstalling the app may resolve the issue.
• Without a connected device, access the software only through the “No Device" option.

Voice Control

If your model supports voice control, you can wake up the device and control its functions using voice commands.

• Wake words: "Hi Cyra"
• Commands:
• ON: Turn on the power, Please turn on the device, Please power on
• OFF: Turn off the power, Please turn off the power, Please power off
• Voice: Voice up, Voice down, Voice minimum, Voice maximum

(Visual description: A diagram illustrating the microphone and switch buttons on the device, and a visual representation of the wake word "Hi Cyra" with sound wave graphics.)

Installation

1. Connect the middle cables between the upper and lower sections of the stand, ensuring correct wire matching to avoid misconnection.
2. Insert the Middle Cable Assembly into the stand, align the Upper Stand Section with the Lower Stand Section, and securely tighten both sections using two M6 screws.
3. Install four casters on the base and tighten each caster with four hex screws (M4). (Note: For some models, wheels may not be included or pre-installed. The wheels can be locked using the knob.)
4. Remove the Base Cover, mount the Integrated Stand Assembly onto the Base Assembly. Align positioning marks, and secure the connection by tightening four M6 screws in a cross pattern. (Note: The DC port is on the back. Install with the correct orientation.)
5. Secure the base cover with six hex countersunk screws (M4).
6. Install the fill light, align it with the four holes at the back, and tighten with four hex countersunk screws (M4).
7. Insert the external DC connector of the stand into the fill light.
8. Connect the external 3-pin cable of the stand to the 3-pin cable of the fill light. (Note: If the stand light does not illuminate, check cable contact.)
9. Unscrew the three black hand-tightened screws at the back of the fill light, and remove the tablet cover. (Hold the cover to prevent it from falling.)
10. Loosen the tablet fixing support, choose the appropriate cover based on the tablet size, place the tablet, and tighten the fixing screws. (Note: If no black foam is provided, find it in the accessory bag and attach it. For 10.2" or 10.5" screens, refer to page 13 for detailed instructions.)
11. Reattach the cover and tighten the three hand-tightened screws at the back. (Note: Check if the golden handle is properly installed.)
12. Connect the bottom DC interface, turn on the power, and the tablet photo booth is ready to use.