ECHANFIT Magnetic Rowing Machine
User Manual
Thank you for purchasing the ECHANFIT CRW4106/4106B Magnetic Rowing Machine. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
- Magnetic Rowing Machine CRW4106/4106B
- User Manual
- Toolkits
Product Diagram
Diagram showing the ECHANFIT Magnetic Rowing Machine, illustrating its main components including the frame, seat, pedals, and console.
IMPORTANT SAFETY INFORMATION
Thank you for choosing ECHANFIT magnetic rowing machine CRW4106/4106B.
Warning: To ensure your safety and health, please use this rowing machine correctly. It is important to read this entire manual before assembling and using the rowing machine. Safe and effective use can only be achieved if the rowing machine is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the rowing machine are informed of all warnings and precautions.
- Before starting exercise, consult with your doctor to determine if your health and physical condition are adequate for using this product.
- If you are taking medication that affects your heart rate or blood pressure, your doctor's advice is extremely important.
- Always pay attention to adverse reactions of the body. Improper and excessive use can damage your body. If you notice any of the following symptoms, stop exercising immediately: Chest pain and chest tightness, abnormal heartbeat, shortness of breath, lightheadedness, dizziness, or nausea. Consult your doctor before continuing exercise if any of these symptoms occur.
- Keep children and pets away from the rowing machine. This rowing machine is only suitable for adults.
- Place the rowing machine on a firm, flat horizontal surface with soft materials to protect your ground and carpets. Keep at least 0.6 m (approx. 2 feet) of open space around the rowing machine.
- Ensure all screws and nuts are locked before using the rowing machine.
- Use the rowing machine correctly according to the label. If parts are found to be defective during assembly or inspection, or if you hear abnormal sound, stop using it immediately until the problem is solved.
- Wear suitable clothing during exercise. Avoid loose clothing that may get caught or restrict movement.
- This rowing machine is for indoor use only. Maximum user weight is 264 LB (approx. 120 kg).
- Be careful not to sprain your back when moving or lifting this rowing machine.
- This rowing machine is not suitable for medical rehabilitation.
- Keep the instruction manual and assembly tools for emergency use.
EXPLODED DIAGRAM
Diagram illustrating the exploded view of the ECHANFIT Magnetic Rowing Machine, showing all parts and their corresponding numbers for assembly and identification.
PARTS LIST
| No. | Description | Qty | No. | Description | Qty |
| 1 | Main frame | 1 | 35 | Flat washer 5 | 2 |
| 2 | Rear foot tube frame | 1 | 36 | Flat washer 8 | 23 |
| 3 | Slide tube frame | 1 | 37 | Flat washer 10 | 1 |
| 4 | Foot pedal tube assembly | 1 | 38 | Left protective cover | 1 |
| 5 | Computer bracket | 1 | 39 | Right protective cover | 1 |
| 6 | Tension tube | 1 | 40 | Decorative cover | 2 |
| 7 | Seat cushion limiting plate | 2 | 41 | Armrest fixing pad | 1 |
| 8 | Seat cushion mounting plate | 2 | 42 | Foot pedal | 2 |
| 9 | Front foot tube | 1 | 43 | Belt PJ660/260J | 1 |
| 10 | Magnetic wheel | 1 | 44 | Ribbon pulley Φ45°35 | 1 |
| 11 | Deep groove ball bearing 608-2RS | 4 | 45 | Foam L=210mm | 2 |
| 12 | Deep groove ball bearing 6000-2RS | 2 | 46 | Foot pedal adjusting belt | 2 |
| 13 | Pull rod | 4 | 47 | Resistance knob (assembly) | 1 |
| 14 | Pull rod limiting plate | 4 | 48 | Pullback device | 1 |
| 15 | Allen wrench | 1 | 49 | Seat cushion wheel | 2 |
| 16 | Wrench with screw driver | 1 | 50 | Seat cushion | 1 |
| 17 | Lock nut M8 | 5 | 51 | Left front cover | 1 |
| 18 | Lock nut M10 | 1 | 52 | Eccentric foot cover | 2 |
| 19 | Nut M8 | 4 | 53 | Circular tube plug | 2 |
| 20 | Nut M10*1.0 | 4 | 54 | Limit sleeve | 1 |
| 21 | Nut M10*1.0 | 4 | 55 | Cushion pad | 4 |
| 22 | Bolt M8*125 | 3 | 56 | Non-slip mat | 1 |
| 23 | Isolation nylon pad Φ23*Φ10.5*2 | 2 | 57 | Computer back cover | 1 |
| 24 | Bolt M8*65 | 4 | 58 | Computer up cover | 1 |
| 25 | Bolt M10*55 | 1 | 59 | Dry battery | 2 |
| 26 | Bolt M8*20 | 11 | 60 | Bottom wire L=500m | 2 |
| 27 | Bolt M8*40 | 2 | 61 | Induction bar clamp | 1 |
| 28 | Screw ST4.2*12 | 8 | 62 | Roller spacing | 4 |
| 29 | Screw ST4.2*9.5 | 1 | 63 | Right front cover | 1 |
| 30 | Bolt M5*10 | 3 | 64 | Seat cushion wheel | 2 |
| 31 | Bolt ST4.2*13 | 8 | 65 | Bolt M6*50 | 2 |
| 32 | Screw ST4.2*9 | 12 | 66 | Nut M6 | 2 |
| 33 | Bolt M6*8 | 4 | 67 | Screw ST4.2*19 | 2 |
| 34 | Spring washer 8 | 15 | 68 | Anti-slipped pad A | 2 |
HARDWARE PACKAGE
Diagram showing the hardware package contents, including various bolts, nuts, and washers required for assembly.
SPARE PARTS LIST
| No. | Description | Spec. | Qty. | No. | Description | Spec. | Qty. |
| 1 | Main frame | 1 | 58 | Computer | 1 | ||
| 2 | Rear foot tube frame | 1 | 24 | Bolt | M8*65 | 4 | |
| 3 | Slide tube frame | 1 | 26 | Bolt | M8*20 | 7 | |
| 4 | Foot pedal tube assembly | 1 | 36 | Flat washer | Φ8 | 13 | |
| 5 | Computer bracket | 1 | 28 | Screw | ST4.2*12 | 2 | |
| 9 | Front foot tube | 1 | 34 | Spring washer | 8 | 11 | |
| 42 | Foot pedal | 2 | 50 | Seat cushion | 1 | ||
| 15 | Allen wrench | S=5 | 1 | 55 | Cushion pad | Φ25*18 | 2 |
| 16 | Wrench with screw driver | S13、14、15 | 1 | 59 | Dry battery | 2 | |
| 17 | Lock nut | M8 | 2 | 27 | Bolt | M8*40 | 2 |
| 31 | Screw | ST4.2*13 | 2 |
Install Tool:
- #15 Allen Wrench S=5 1PC
- #16 Wrench with screw driver S13、14、15 1PC
Diagrams showing the installation tools provided.
INSTALL INSTRUCTIONS
STEP 1:
Diagram illustrating Step 1 of assembly: Attach the Front foot tube frame (9) to the Main frame (1) using Bolt (24), Washer (36), and Spring washer (34) with the Allen wrench (15).
STEP 2:
Diagram illustrating Step 2 of assembly: Attach the Rear foot tube frame (2) to the Slide tube frame (3) using Bolt (26), Flat washer (36), and Spring washer (34).
STEP 3:
Diagram illustrating Step 3 of assembly: Install the Seat cushion (50) onto the Slide tube frame (3).
STEP 4:
Diagram illustrating Step 4 of assembly: 1. Attach the Slide tube frame (3) to the Main frame (1) using Bolt (26), Spring washers (34), and Flat washers (36). 2. Screw the Cushion pad (55) into the Main frame (1).
STEP 5:
Diagram illustrating Step 5 of assembly: Attach the Foot pedal (42) to the Foot pedal tube assembly (4) using Bolt (23), Flat washer (36), and Lock nut (17).
STEP 6:
Diagram illustrating Step 6 of assembly: Attach the Foot pedal tube assembly (4) to the Main frame (1) using Bolt (27), Spring washer (34), and Flat washer (36).
STEP 7:
Diagram illustrating Step 7 of assembly: Insert Sensor cable A and B into the Computer bracket (5), and then secure the Computer (58) to the bracket with Screw (31).
STEP 8:
Diagram illustrating Step 8 of assembly: 1. Insert Dry batteries (59) into the Computer up cover (58). 2. Connect Sensor cables A and B to their corresponding ports. 3. Insert the Computer bracket (5) into the Main frame (1) and secure it with Screws (28).
PEDAL ADJUSTMENT
Diagram showing a foot pedal with adjustable straps. Arrows indicate that direction A tightens the strap and direction B loosens it, allowing adjustment for different foot sizes.
The pedal strap is adjustable according to the size of your feet. The specific tightness adjustment method is shown in the figure. Direction A is for tightening, and direction B is for loosening.
MOVING THE MACHINE
Frame Movement:
The front foot tube frame is equipped with transport wheels. Lift the rear foot tube frame to move the machine to your desired location.
Diagram showing a person lifting the rear of the rowing machine to roll it on its front transport wheels.
RESISTANCE AND FRAME BALANCE ADJUSTMENT
Resistance Adjustment:
Turn the resistance knob (47) clockwise to increase resistance and counter-clockwise to decrease resistance.
Frame Horizontal Regulation:
If the ground is uneven, adjust the rear foot cover (52) in the direction indicated by arrows A or B in the figure to level the frame.
DISPLAY MANUAL
Button Function:
- MODE: Press this button to select the function. Keep pressing for 3 seconds to clear all data (time, count, calories, total count, distance, and scan).
Diagram of the rowing machine console showing the MODE button and the display screen.
Functional Operation:
- SCAN: When in scan state, the computer automatically cycles through Time, Count, Calories, Total Count, and REPS/MIN every 6 seconds.
- TIME: Displays the duration of the workout.
- COUNT (Times Count): Displays the number of strokes during the workout.
- CALORIE: Displays the estimated calories burned during the workout.
- TOTAL COUNT (Total Number of Times): Displays the total number of strokes since the batteries were installed.
The computer display will automatically turn off after 4 minutes of inactivity to save power and will reactivate upon detecting movement or button presses.
- REPS/MIN (Average Speed): Displays the average number of strokes per minute.
Scope Description:
| Function | Scanning interval | Every 6 seconds |
| Time (minutes) | 0:00-99:59 | |
| Times count | 0-9999 times | |
| Calories | 0:0-999.9 CAL | |
| Total number of times | 0-9999 times | |
| Battery | 2 piece of battery | |
| Working temperature | 0-40 degree | |
| Storage temperature | -0 degree - +60 degree |
STORAGE AND MAINTENANCE
- Keep the rowing machine in a clean and dry place.
- Grasp the frame to move the rowing machine. Do not use the seat, as it may move and cause injury.
- Remove the batteries if storing the machine for an extended period.
- Clean the Seat Rail with an absorbent cloth.
- Ensure all nuts and bolts are properly tightened regularly.
- Regular inspection is required. Replace any worn or damaged parts immediately.
Warranty and Customer Support
For questions, support, or warranty claims, contact ECHANFIT customer support:
Amazon US Orders: service@camelonfit.com
Please note that ECHANFIT provides after-sales service only for products purchased directly from ECHANFIT. If purchased from a different seller, please contact them directly for service or warranty issues.
Model: CRW4106/4106B
XIAMEN CAMELON TECHNOLOGY CO., LTD.
Website: https://www.amazon.com/echanfit
Email: service@camelonfit.com
Amazon.com: ECHANFIT