CHAMBERLAIN GAME TABLES
ASSEMBLY INSTRUCTIONS FOR FOOSBALL TABLE
Models: PG-4007/PG-4034
Parts List
| Part # | Name | Quantity |
|---|---|---|
| #1 | Main Cabinet | 1 piece |
| #2 | Leg | 4 pieces |
| #3 | End Leg Panel | 2 pieces |
| #4 | Side Leg Panel | 1 piece |
| #5 | Two Player Rod | 2 pieces |
| #6 | Three Player Rod | 4 pieces |
| #7 | Five Player Rod | 2 pieces |
| #8 | 5/8"X38MM plastic Washer | 16 pieces |
| #9 | Visit players | 13 pieces |
| #10 | Home players | 13 pieces |
| #11 | 8#X1" Screw | 26 pieces |
| #12 | Lock Nut | 26 pieces |
| #13 | Rod Handle | 8 pieces |
| #14 | Bumper | 16 pieces |
| #15 | T5x15mm Screw | 8 pieces |
| #16 | Rod end cap | 8 pieces |
| #17 | F4X1/2" Screw | 2 pieces |
| #18 | Ball entry cup | 2 Set |
| #19 | 5/16"X1-1/2" Bolt | 8 pieces |
| #20 | 5/16"X2-1/4" Bolt | 4 pieces |
| #21 | 5/16"X4-3/4" Bolt | 8 pieces |
| #22 | 5/16" Washer | 20 pieces |
| #23 | 5/16" Washer | 20 pieces |
| #24 | Ball | 2 pieces |
| #25 | Allen Key | 1 piece |
| #26 | Leg leveler | 4 pieces |
Step 1:
Attach one leg leveler (#26) to the bottom of each of the four legs (#2). Insert one screw (#21), one washer (#22), and one washer (#23) through the leg leveler and into the bottom of each leg. The diagram shows the main cabinet (#1) with four legs (#2) attached. The leg levelers (#26) are being attached to the bottom of these legs using screws (#21) and washers (#22, #23).
Step 2:
Assemble the leg structures by attaching the End Leg Panels (#3) to the Side Leg Panel (#4). The diagram shows two End Leg Panels (#3) and one Side Leg Panel (#4) being joined. Hardware used includes screws (#20) and washers (#22, #23).
Step 3:
Attach the assembled leg structures from Step 2 to the main cabinet (#1). Use bolts (#19) and washers (#22, #23) to secure the leg assemblies to the sides of the main cabinet. The diagram shows the main cabinet with legs attached, and the leg assemblies from Step 2 being bolted on. It also shows leg levelers (#26) being attached to the bottom of the legs using screws (#26) and washers (#22, #23).
Step 4:
Install the player rods. Insert the Two Player Rods (#5), Three Player Rods (#6), and Five Player Rods (#7) through the designated holes in the main cabinet (#1). Each rod assembly typically consists of players (#9, #10), a rod handle (#13), a screw (#11), a washer (#8), and a lock nut (#12). The diagram shows a close-up of a player rod assembly and indicates player colors as BLACK and GRAY.
Step 5:
Attach rod end caps and ball entry cups. Install rod end caps (#16) onto the ends of the player rods. Attach the ball entry cups (#18) to the sides of the main cabinet using screws (#17). Bumpers (#14) are also shown, which are typically placed on the player rods.