Illustrated Parts Manual

Models: SFCII-30-7CV-S, SFCII-30-7CV-S-CA

This manual covers the operating instructions and illustrated parts list for: SFC30-7CV-S with a serial number range of Y3300001 to Y3399999, and SFC30-7CV-S-CA with a serial number range of Z7000001 to Z7099999.

Part No. 06418 Printed 09/2023. Printed in USA.

Scag Approved Attachments and Accessories

Attachments and accessories manufactured by companies other than Scag Power Equipment are not approved for use on this machine.

Scag approved attachments and accessories:

Accessories Grass Catcher (P/N Included)
Mulching Baffle & Block-Off Plate (Included)

Cutter Deck

This diagram illustrates the components of the Cutter Deck. It shows various parts labeled with reference numbers from 1 to 60, including pulleys, belts, guards, spindles, and blades.

Ref. No.	Part No.	Description
1	04013-05	Capscrew,FlangeHexhead3/8-16x.750LG
2	487693	Belt Cover
3	487918	Belt , Cutter Deck SFC30
4	04112-05	Locknut, Spiralock 1/2 - 13
5	04117-02	Locknut w/Flange Elastic Stop 3/8-16
6	04043-04	Washer, Flat - Hardened
7	486869	Pulley, 3.5" Idler
8	487849	Pulley, Deck
9	04041-11	Washer, Flat - 3/8
10	463612	Idler Arm Assembly
11	04001-21	Capscrew, Hexhead 3/8-16 UNC X 1.75
12	04040-05	Washer, Ansi Plain Type A 3/8
13	463623	Cutter Deck w/Decals
14	429669	Guard, RH
15	04117-03	Locknut w/Flange Elastic Stop 1/4 - 20
16	04003-07	Carriage Bolts, 1/4-20 X .50 LG
17	429519	Deck Guard, RH
18	429845	Mounting Bracket, Side Discharge
19	04019-03	Nut, Serrated Flange Hexhead, 5/16-18
20	04003-04	Carriage Bolts, 5/16-18 X 1.00 LG
21	431260	Pivot, Idler
22	04110-01	U-Nut
23	429731	Door, Side Access
24	04017-04	Capscrew,SerratedFlangeHexhead1/4-20X.50LG
25	429668	Guard, LH
26	429534	Guard, LH
27	04063-05	Key, 3/16 X 3/16 X 1.50
28	486710	Bearing, Ball - 20MM
29	431115	Spacer, Bearing
30	431112	Spindle Housing
31	04001-136	Capscrew, Hexhead 3/8-16 UNC X 1.5
32	431113	Shaft, Spindle
33	488214	Linkage Assembly, Idler Spring
34	463271	Spindle Assembly
35	04001-57	Capscrew, Hexhead 1/2-13 UNC X 1.00
36	04043-08	Washer, Flat - Hardened 1/2
37	486882	Cutter Blade
38	04117-01	Locknut w/Flange Elastic Stop 5/16-18
39	04001-22	Capscrew, Hexhead 3/8-16 UNC X 2.75
40	453466	Rear Baffle Wlmt
41	04003-14	Carriage Bolts, 5/16-18 X .50 LG
42	429573	Baffle, Rear Discharge
43	429574	Baffle, Rear Discharge
44	04003-43	Carriage Bolts, #10-24 X .50 LG
45	481309	Latch Hood
46	04021-26	Hex Lock Nut #10-24
47	487886	Blockoff Plate, Side Discharge
48	486888	Discharge Chute, 30
49	453575	WLMT, Chute MTG
50	463634	Discharge Chute Assembly
51	484535	Spring, Brake
52	488216	Swivel, Brake
53	04061-02	Cotter Pin, 3/32 X .75
54	04004-64	Stud - Tabulated, Hex Nut, 3/8-24 LH
55	04020-25	Rod End, 3/8-24 RH Female THD
56	482330	Capscrew, Hexhead 3/8-16 UNC X 1.25
57	04001-32	Plate, Latch
58	4200807	Spacer Idler Spring Rod MTG
59	4200689	Carriage Bolt, 3/8-16 X 4.75 LG
60	04003-37	Carriage Bolt, 3/8-16 X 4.75 LG

Cutter Deck Lift System - Swivel Wheel

This diagram illustrates the components of the Cutter Deck Lift System with Swivel Wheel. It displays parts labeled with reference numbers from 1 to 43, including knobs, bolts, wheels, bearings, springs, and linkages.

Ref. No.	Part No.	Description
1	484093	Knob, Soft Touch
2	04001-18	Bolt, Hex Head 3/8-16 x 3/4"
3	04024-03	Push Nut
4	463411	Trail Shield
5	04117-02	Nut, 3/8-16 Flange Elastic Stop
6	486702	Wheel Assembly, Front
7	486765	Bearing (x2)
8	431123	Spacer, Front Wheel
9	04017-17	Bolt, Hex Head 5/16-18 x 1"
10	04001-30	Bolt, Hex Head 3/8-16 x 4"
11	04117-01	Nut, 5/16-18 Flange Elastic Stop
12	04003-04	Bolt, Carriage 5/16-18 X 1.00 LG
13	488139	Spring, Deck Lift Assist
14	04001-19	Capscrew, Hexhead, 3/8-16 UNC X 1.00
15	431272	Pivot, Deck Lift Link
16	453285	Yoke Weldment
17	04021-09	Hex Lock Nut, 3/8-16
18	04019-03	Nut, Serrated Flange Hexhead 5/16 - 18
19	429644	Bracket Link
20	04011-29	Screw, Self Tapping 1/4-20
21	44246	Rod Hex Lock Nut, 1/4 - 20
22	04021-08	Yoke Support Weldment, LH
23	453286	Cutter Deck W/Decals
24	463623	Bearing
25	48224	Carriage Bolt, 5/16-18 X .75 LG
26	04003-12	Spacer
27	431047	Yoke Support Weldment, RH
28	453287	Flatwasher, 3/8-.406 x .812 x .065
29	04040-05	Flatwasher, 3/8-.406 x 1.50 x 7 Ga.
30	04041-11	Lockwasher, 3/8"
31	04030-04	Capscrew, Hexhead 5/16-24 UNF X 1.25
32	04001-16	Pin Assembly, Swivel Lock
33	487102	Grease Fitting
34	48114-04	Capscrew, Hexhead 1/4 - 20 UNC X 1.25
35	04001-14	Lever WLMT, Deck Lift
36	453510	Sprin, Deck Lift Lever Return
37	487865	Cotter Pin 3/32 x 1.00
38	04061-01	MTG, Deck Lift Link
39	431262	Caster Lift Support WLMT
40	453452	Anchor, Deck Lift Spring
41	4200278	Locknut w/Flange Elastic Stop 1/4-20
42	04117-03	Carriage Bolt, 1/4-20 X .75 LG
43	04003-02	Link, Decklift

Bag and Rear Door Components

This diagram illustrates the components for the Bag and Rear Door. It shows parts labeled with reference numbers from 1 to 11, such as GC bag assemblies, rear covers, supports, and springs.

Ref. No.	Part No.	Description
1	463731	Assembly, GC Bag (incl. #3)
2	488435	GC Bag Only
3	429469	Rear Cover Weldment
4	453245	Weldment, Bag Support
5	487414	Spring, Rear Cover
6	04136-02	Nut, 1/4-20 Flange Elastic Stop
7	488143	Sheild, Rubber
8	463411	Trail Shield
9	487091	Assembly (Includes 10, 11)
10	453464	Trail Sheild Rear Cover Weldment
11	04024-03	Nut, Push-On 5/16
12	04011-29	Screw, Self Tapping Rod, Support - Spring
13	44246	Screw, Self Tapping Rod, Support - Spring

Chassis Components

This diagram illustrates the Chassis Components. It features parts labeled with reference numbers from 1 to 15, including guards, brackets, frame weldments, and access doors.

Ref. No.	Part No.	Description
1	04017-16	Bolt, Hex Head Serrated Flange 5/16-18 x 3/4"
2	428545	Guard, Engine
3	04117-01	Nut, 5/16-18 Flange Elastic Stop
4	428546	Guard Bracket, Side
5	428514	Cover, Transmission Access
6	04017-04	Bolt, Hex Head Serrated Flange 1/4-20 x 1/2"
7	04110-01	U-Nut, 1/4-20
8	463623	Frame Weldment w/Decals
9	429731	Door, Side Access
10	04003-12	Bolt, Carriage 5/16-18 x 3/4"
11	429531	Mounting Bracket, Transmission
12	04003-14	Bolt, Carriage 5/16-18 X 1.50 LG
13	04019-03	Nut, Serrated Flange HH 5//16 - 18
14	453452	Caster Lift Support WLMT
15	453484	Handle Support WLMT, LH
16	453485	Handle Support WLMT, RH

Handle Bar Components

This diagram illustrates the Handle Bar Components. It displays parts labeled with reference numbers from 1 to 29, such as handle tubes, cables, levers, grips, and mounting hardware.

Ref. No.	Part No.	Description
1	488179	Tube, Handle Bottom
2	488394	Bail, Dipped
3	04001-03	Capscrew Hexhead 1/4-20 UNC X 2"
4	463734	Throttle Cable w/Decal
5	488162	Cable, Brake
6	04117-03	Nut, 1/4-20 Flange Elastic Stop
7	488161	Cable, Clutch
8	488160	Cable, Drive
9	04021-08	Hex Lock Nut 1/4-20
10	04003-51	Carriage Bolt 1/4-20 x 2"
11	429657	Drive Cable Mount
12	453451	Top Bail WLMT
13	487486	Spring, PTO Latch
14	463733	PTO Latch w/Grip
15	487155	Grip
16	04009-12	Bolt, Shoulder 5/16"
17	429122	Clamp, Cable
18	4200296	Bracket, Cable Mount
19	04021-02	Hex Lock Nut 1/4-20
20	481885-08	Knob, 3/8-16 x 2.48 OD (Use 04117-02 Nut for commercial or long term use)
21	04003-31	Carriage Bolt 3/8-16 x 3/4"
22	04013-05	Bolt, Flange 3/8-16 x 3/4"
23	04117-02	Nut, 3/8-16 Flange Elastic Stop
24	04003-02	Carriage Bolt 1/4-20 X 3/4"
25	463632	Handle Assembly, Brake
26	488165	Grip, Brake Lever
27	44201	Guide, Pull Rope
28	04021-14	Washer Hex Lock Nut #10-24
29	04021-26	Pivot, Brake Lever
30	431293	Machine Screw 1/4-20 X 1 1/2"
31	04010-47	Machine Screw 1/4-20 X 1 1/2"

Rear Drive System Components

This diagram illustrates the Rear Drive System Components. It shows parts labeled with reference numbers from 1 to 27, including frame weldments, axle bearings, gears, brake calipers, and transmission parts.

Ref. No.	Part No.	Description
1	463488	Frame Weldment w/Decals
2	463320	Axle Bearing Assembly (incl. #3)
3	486709	Bearing Assembly, Axle
4	463439	Pivot - RH
5	483453-30	Bearing Nut, 3/8-16 Flange Elastic Stop
6	04117-02	Wheel Assembly, Rear (incl. gear and bearings) 10-1/2" Dia.
7	486978	Bearing (x2)
8	486765	Spacer, Front Wheel
9	486907	Gear
10	04011-29	Screw, 1/4-20 x 3/8"
11	486923	Cover, Rear Wheel
12	04050-20	Retaining Ring, 1/2" Ext. HD
13	486719	Gear, Pinion
14	453479	Weldment, Rear Axle
15	463438	Assembly, Axel Pivot - LH
16	483453-30	Bearing Nut, 1/4-20 Flange Elastic Stop
17	04117-03	Screw, 1/4-20 x 3/4" Taptite
18	04011-35	Mounting Bracket, Transmission
19	428398	Bolt, Hex Head 5/16-18 x 1-1/2"
20	04001-11	Nut, 5/16-18 Flange Elastic Stop
21	04117-01	Caliper, Brake
22	486924	Bolt, Hex Head 1/4-20 x 1"
23	04001-14	Bracket, Brake Caliper
24	428829	Bolt, Carriage 1/4-20 x 3/4"
25	04003-02	Transmissiion MV702
26	486697	Rotor Assembly, Brake (incl.#25, #26)
27	463364	Pin, 3mm x 26mm Slotted Disk, Brake
28	04135-01	Screw, #10-32 x 1/2"
29	428643	Bolt, Carriage 5/16-18 x 3/4"
30	04011-16	Bolt, Carriage 5/16-18 x 3/4"
31	04003-12	Bolt, Carriage 5/16-18 x 3/4"

Engine and Attaching Parts

This diagram illustrates the Engine and Attaching Parts. It displays components labeled with reference numbers from 1 to 21, including engines, oil tubing, belts, pulleys, and fuel tank brackets.

Ref. No.	Part No.	Description
1	*CA Only	Engine, Kohler PH-CV224-3015
2	482510	Engine, Kohler PA-CV224-3025
3	483280	Oil Drain Tubing, OIl Drain (order by inch)
4	04011-07	Bolt, Hex Head 3/8-16 x 1-1/4"
5	463679	Self Tap Clutch Belt, Transmission
6	487917	Transmission, MV702
7	486697	Pulley, Transmission
8	487848	Key, WDRF # 505 FLAT BOTTOM
9	04063-39	Key, WDRF # 505 FLAT BOTTOM
10	04041-11	Flatwasher, 3/8-.406 x 1.50 x 7 Ga.
11	04030-04	Lockwasher, 3/8"
12	04102-15	Spring
13	04001-04	Bolt, Hex Head 3/8-24 x 2" w/ Patch Lock
14	463616	Bolt, Carriage 5/16-18 x 3/4"
15	431194	Anti Rotation Pin, Anti Rotation
16	04063-17	Key, , 3/16 X 3/16 X 1"
17	04019-02	Nut, Serrated Flange Hexhead, 1/4 - 20
18	04003-07	Carriage Bolt, 1/4-20 X .50 LG
19	486912	Hour Meter
20	429584	Fuel Tank Bracket
21	4200880*	*CA Models Only Hex Nut, 7/16 - 14
22	04020-41	Hex Nut, 7/16 - 14

* Available through individual engine manufacturer.

Fuel System (Excludes CA Models)

This diagram illustrates the Fuel System components, excluding California models. It shows parts labeled with reference numbers from 1 to 18, such as fuel tanks, valves, hoses, filters, and clamps.

Ref. No.	Part No.	Description
1	463366	Fuel Tank Assembly w/Decal (incl. #2, #3, #4, #5)
2	486939	Valve
3	486940	Grommet, Valve
4	482571	Bushing, .56 Viton
5	483748	Elbow w/Screen, 90 Degree
6	486967	Cap, Fuel Tank
7	48059-01	Clamp, Fuel Hose 1/4" ID
8	483617	Fuel Hose, Non-Perm 1/4" (order by inch)
9	486938	Valve, Fuel Shutoff
10	*	Clamp Fuel Hose
11	*	Fuel Filter
12	*	Cap Screw Serrated Flange HH, 1/4 - 20 X .50
13	04017-04	Hose, Vapor 3/16 (order by inch)
14	484345	Bolt, Hex Head 1/4-20 x 1/2"
15	04017-04	Bracket, Fuel Tank
16	429584	CA Models Only Clamp, 1-1/2" Cable
17	4200880	Canister, Carbon 1.28 Gal.
18	48030-26	Canister, Carbon 1.28 Gal.
19	486925	Canister, Carbon 1.28 Gal.

* Available through individual engine manufacturer.

MV702 Transmission

This diagram illustrates the MV702 Transmission. It shows parts labeled with reference numbers from 1 to 3, indicating service kits for idler assembly, pulley/fan assembly, and clutch lever assembly.

Ref. No.	Part No.	Description
1	463371	Transmission Service Kit, Idler Assembly
2	463370	Transmission Service Kit, Pulley & Fan Assembly
3	463372	Transmission Service Kit, Clutch Lever Assembly

Replacement Decals and Information Plates

This diagram illustrates various Replacement Decals and Information Plates. It shows decals labeled with reference numbers from 1 to 16, including fuel tank, deck height, warning, danger, and brand identification decals.

Ref. No.	Part No.	Description
1	485667	Decal, Fuel Tank
2	487733	Decal, Deck Height
3	481099	Decal, Spring Loaded Idler
4	483402	Decal, Belt Cover
5	483405	Decal, Warning
6	483406	Decal, Knives
7	483505	Decal, Spinning Blades
8	484803	Decal, Danger Cut Finger
9	485403	Decal, USA
10	486447	Decal, ANSI Compliance
11	486945	Decal, 30 Commercial Grade
12	483900	Decal, Warning Spark Arrestor
13	487489	Decal, Warning SFC 21
14	487499	Decal, Speed Select
15	486968	Decal, Scag
16	486965	Decal, Belt Routing

Safety Information: Avoid injury from burns - Shut off engine - Allow to cool several minutes - Remove cap slowly - Do not overfill.

Spark Arrestor Warning: Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

	Scag SFCII-30-7CV-S Operator's Manual: Safety, Operation, and Maintenance Guide Comprehensive operator's manual for Scag SFCII-30-7CV-S and SFCII-30-7CV-S-CA zero-turn mowers. Covers safety, operation, maintenance, adjustments, and parts. Essential guide for efficient and safe use.
	Scag SFC Walk-Behind Illustrated Parts Manual This manual provides illustrated parts lists for Scag SFC Walk-Behind mower models SFC-30-7CV, SFC-30-7CV-CA, SFC-30-7CV-S, and SFC-30-7CV-CA-S. It details components for the cutter deck, lift systems, bag and rear door, chassis, handle bar, rear drive system, engine, fuel system, and transmission, along with replacement decals and information plates.
	SCAG Power Equipment 2026 Model Year Pricing Announcement - No Price Increases SCAG Power Equipment announces their 2026 Model Year Pricing Announcement, highlighting a commitment to no price increases, no surcharges, and no compromise on quality, distinguishing them from competitors.
	SCAG SFZ Freedom Z Illustrated Parts Manual Detailed illustrated parts manual for SCAG SFZ Freedom Z zero-turn mowers, covering models SFZ-48H, SFZ-52H series. Includes part numbers and diagrams for cutter decks, drive systems, fuel systems, and more.
	Scag Cheetah Operator's Manual Comprehensive operator's manual for the Scag Cheetah zero-turn mower, covering operating instructions, safety information, maintenance, and troubleshooting. Includes model numbers SCZ61V-27FX, SCZ61V-31CV-EFI, SCZ61V-31FX, SCZ61RD-31FX, SCZ61V-37BV-EFI, SCZ72V-31FX, and SCZ72V-37BV-EFI.
	Scag SW Series Operator's Manual: Operation, Maintenance, and Safety Guide This operator's manual provides comprehensive instructions for the Scag SW series commercial mowers, covering safe operation, maintenance procedures, troubleshooting, and technical specifications. Essential guide for owners and operators of Scag SW mowers.
	Scag Tiger Cat II Operator's Manual: Operating, Maintenance, and Safety Guide Comprehensive operator's manual for Scag Tiger Cat II zero-turn mowers. Covers operating instructions, safety guidelines, maintenance procedures, specifications, and parts lists for models STCII-48V, STCII-52V, and STCII-61V.
	Scag Turf Tiger II STTII Operator's Manual: Operation, Maintenance, and Safety Guide Comprehensive operator's manual for Scag Turf Tiger II STTII series commercial zero-turn mowers, covering safe operation, maintenance procedures, specifications, and parts lists. Essential guide for owners and operators.