Installation Manual-MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Installation Guide for MEAN WELL models including: NDR-480-24, NDR-480-48, NDR-480 Series LED Neon Flex Control and Accessories, NDR-480 Series, LED Neon Flex Control and Accessories, Flex Control and Accessories, Control and Accessories, and Accessories
LED Neon Flex Control & Accessories - Olympia Lighting
File Info : application/pdf, 4 Pages, 188.42KB
DocumentDocument480W Single Output Industrial DIN RAIL NDR-480 series User's Manual Features THOM AS SAMUEL THOMAASS SSAAMMUEL IS13252 R33100 (except 48V) RoHS Bauart gepruft Sicherheit egelma ge od o s be wac g www.tuv.com ID 2000000000 TPTC004 BS EN/EN62368-1 IEC62368-1 Applications Universal AC input / Full range Industrial control system Built-in active PFC function Factory automation Protections: Short circuit / Overload / Over voltage / Over temperature Electro-mechanical apparatus Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty Description NDR-480 is one economical slim 480W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. NDR-480 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 92.5%, the entire series can operate at the ambient temperature between -20 and 70 under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV BS EN/EN62368-1, and etc.) make NDR-480 a very competitive power supply solution for industrial applications. Model Encoding NDR - 480- 24 Output voltage Output wattage Series name File Name:NDR-480-SPEC 2024-07-15 480W Single Output Industrial DIN RAIL NDR-480 series SPECIFICATION MODEL NDR-480-24 NDR-480-48 DC VOLTAGE 24V 48V RATED CURRENT 20A 10A CURRENT RANGE 0 ~ 20A 0 ~ 10A RATED POWER 480W 480W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 24 ~ 28V VOLTAGE TOLERANCE Note.3 ±1.0% LINE REGULATION ±0.5% LOAD REGULATION ±1.0% 48 ~ 55V ±1.0% ±0.5% ±1.0% SETUP, RISE TIME 1500ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.94/230VAC at full load INPUT EFFICIENCY (Typ.) 92.5% 92.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4.8A/115VAC 20A/115VAC 2.4A/230VAC 35A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 105 ~ 130% rated output power Protection type : Constant current limiting, unit will shut down after 3 sec., re-power on to recover PROTECTION OVER VOLTAGE 29 ~ 33V 56 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH ±0.03%/ (0 ~ 50) Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS Ul508, TUV BS EN/EN62368-1, EAC TP TC 004 , BSMI CNS14336-1 , IS13252(Part1)/IEC60950-1(except for 48V) approved; (meet BS EN/EN60204-1) SAFETY & WITHSTAND VOLTAGE EMC (Note 4) ISOLATION RESISTANCE EMC EMISSION I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32),BS EN/EN61204-3 Class B,BS EN/EN61000-3-2,-3,EAC TP TC 020,CNS13438 Class B EMC IMMUNITY MTBF Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2 (BS EN/EN50082-2),BS EN/EN61204-3, heavy industry level, EAC TP TC 020 1041.6K hrs min. Telcordia SR-332 (Bellcore) ; 146.8K hrs min. MIL-HDBK-217F (25) OTHERS NOTE DIMENSION 85.5*125.2*128.5mm (W*H*D) PACKING 1.5Kg; 8pcs/13Kg/0.9CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended. 5. Derating may be needed under low input voltage. Please check the derating curve for more details. 6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:NDR-480-SPEC 2024-07-15 480W Single Output Industrial DIN RAIL NDR-480 series Block Diagram EMI FILTER I/P & RECTIFIERS PFC CIRCUIT POWER SWITCHING UVP O.L.P. FG PFC PWM CONTROL CONTROL O.T.P. RECTIFIERS & FILTER PFC fosc : 85KHz PWM fosc : 65KHz +V -V O.C.P. DETECTION CIRCUIT O.V.P. Derating Curve Output derating VS input voltage 100 80 60 50 40 20 -20 0 10 20 30 40 50 60 70 (VERTICAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz LOAD (%) LOAD (%) File Name:NDR-480-SPEC 2024-07-15 480W Single Output Industrial DIN RAIL Mechanical Specification NDR-480 series Case No.984D Unit:mm 128.5 Top View 85.5 1234 TB2 36 125.2 Side View Installation Instruction DC OK + +V ADJ TB1 123 Front View Bottom View Side View Terminal Pin No. Assignment (TB1) Pin No. Assignment 1 FG 2 AC/N or DC 3 AC/L or DC + Terminal Pin No. Assignment (TB2) Pin No. Assignment 1,2 DC OUTPUT +V 3,4 DC OUTPUT-V 35 This series fits DIN rail TS35/7.5 or TS35/15. For installation details, please refer to the Instruction manual. ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 (For reference only. Not included with unit.) Back View Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:NDR-480-SPEC 2024-07-15