SWEBAD Falsterbo Bathtubs: Installation Guide and Technical Data
FALSTERBO 150
Dimensions: 149 x 70 x 64 cm
Volume: 205 L
Installation Guide | Technical Data
Diagram 1 (Bathtub Outline): Shows a top-down view of the bathtub with key dimensions indicated. A pink circle highlights the water inlet area.
Diagram 2 (Installation Schematic): Illustrates the general installation layout. Key connection points are labeled:
- 1. Power Cable: Minimum length of 2 meters. Cable thickness and number of cores should meet local requirements and device performance. Connections must be made by an authorized electrician.
- 2. Water Inlet: Closable cold and hot water input, G ½ thread.
- 3. Drain: Sewage opening with a diameter of 50 mm.
System Specifications
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| Standard | 230 V | 900 W | 4.7 A |
| Bra | 230 V | 1400 W | 6.9 A |
| Bättre | 230 V | 1500 W | 6.6 A |
| Design | 230 V | 1500 W | 6.6 A |
| Lyx | 230 V | 2000 W | 8.8 A |
Note: Heater is included in some systems.
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| 1.5 kW (Bättre, Design) | 230 V | 1500 W | 6.6 A |
| 3.0 kW (Lyx) | 230 V | 3000 W | 13.0 A |
FALSTERBO 160
Dimensions: 159 x 70 x 65 cm
Volume: 230 L
Installation Guide | Technical Data
Diagram 1 (Bathtub Outline): Shows a top-down view of the bathtub with key dimensions indicated. A pink circle highlights the water inlet area.
Diagram 2 (Installation Schematic): Illustrates the general installation layout. Key connection points are labeled:
- 1. Power Cable: Minimum length of 2 meters. Cable thickness and number of cores should meet local requirements and device performance. Connections must be made by an authorized electrician.
- 2. Water Inlet: Closable cold and hot water input, G ½ thread.
- 3. Drain: Sewage opening with a diameter of 50 mm.
System Specifications
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| Standard | 230 V | 900 W | 4.7 A |
| Bra | 230 V | 1400 W | 6.9 A |
| Bättre | 230 V | 1500 W | 6.6 A |
| Design | 230 V | 1500 W | 6.6 A |
| Lyx | 230 V | 2000 W | 8.8 A |
Note: Heater is included in some systems.
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| 1.5 kW (Bättre, Design) | 230 V | 1500 W | 6.6 A |
| 3.0 kW (Lyx) | 230 V | 3000 W | 13.0 A |
FALSTERBO 170
Dimensions: 169 x 75 x 67 cm
Volume: 260 L
Installation Guide | Technical Data
Diagram 1 (Bathtub Outline): Shows a top-down view of the bathtub with key dimensions indicated. A pink circle highlights the water inlet area.
Diagram 2 (Installation Schematic): Illustrates the general installation layout. Key connection points are labeled:
- 1. Power Cable: Minimum length of 2 meters. Cable thickness and number of cores should meet local requirements and device performance. Connections must be made by an authorized electrician.
- 2. Water Inlet: Closable cold and hot water input, G ½ thread.
- 3. Drain: Sewage opening with a diameter of 50 mm.
System Specifications
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| Standard | 230 V | 900 W | 4.7 A |
| Bra | 230 V | 1400 W | 6.9 A |
| Bättre | 230 V | 1500 W | 6.6 A |
| Design | 230 V | 1500 W | 6.6 A |
| Lyx | 230 V | 2000 W | 8.8 A |
Note: Heater is included in some systems.
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| 1.5 kW (Bättre, Design) | 230 V | 1500 W | 6.6 A |
| 3.0 kW (Lyx) | 230 V | 3000 W | 13.0 A |
FALSTERBO XL 180
Dimensions: 179 x 80 x 68 cm
Volume: 250 L
Installation Guide | Technical Data
Diagram 1 (Bathtub Outline): Shows a top-down view of the bathtub with key dimensions indicated. A pink circle highlights the water inlet area.
Diagram 2 (Installation Schematic): Illustrates the general installation layout. Key connection points are labeled:
- 1. Power Cable: Minimum length of 2 meters. Cable thickness and number of cores should meet local requirements and device performance. Connections must be made by an authorized electrician.
- 2. Water Inlet: Closable cold and hot water input, G ½ thread.
- 3. Drain: Sewage opening with a diameter of 50 mm.
System Specifications
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| Standard | 230 V | 1100 W | 4.7 A |
| Bra | 230 V | 1600 W | 6.9 A |
| Bättre | 230 V | 1500 W | 6.6 A |
| Design | 230 V | 1500 W | 6.6 A |
| Lyx | 230 V | 2000 W | 8.8 A |
Note: Heater is included in some systems.
| System | Voltage | Rated Power | Rated Current |
|---|---|---|---|
| 1.5 kW (Bättre, Design) | 230 V | 1500 W | 6.6 A |
| 3.0 kW (Lyx) | 230 V | 3000 W | 13.0 A |
Electrical Specifications
All electrical connections related to the installation of the product must be executed by a certified professional electrician. At connecting, all local regulations must be observed as well as permissible load on one phase. To achieve local auxiliary equipotential bonding, make sure you connect all conductive objects in the same room with the earthing terminal of the product's aluminium frame.
The cross-section of the copper earth continuity connector must be a minimum of 2.5 sq mm. The power circuit of the product must be protected with a residual current circuit breaker with 30mA threshold and a circuit breaker the operating current of which is levelled with the consumed current of the product. The product is connected to the electrical power line as a stationary device, with no plug connector. The length of the power line should allow moving the product away from walls if necessary. Options for connecting to the power network according to local opportunities are given on the diagrams below.
Wiring Diagrams
Diagram 1 (Switchboard): Shows a basic switchboard connection with terminals for Live (L), Neutral (N), and Protective Earth (PE).
Diagram 2 (Junction Box - with heater): Illustrates a wiring setup for a system including a heater, with connections for L, N, and PE.
Diagram 3 (Junction Box - with heater): Depicts a wiring configuration for a system with a heater, utilizing L1, L2, N, and PE terminals.
Key Components:
- 1. Power network: 230V, 50 Hz
- 2. Circuit-breaker
- 3. Residual current circuit breaker: 30mA threshold
- 4. Bath terminals
